22 Tooth Input Shaft Kit
Price: $126.75

Part Number: AX235

OEM Part Numbers - 26928-G01

Item Description -
22 Tooth Input Shaft Kit for 1988 to 1990 Electric E-Z-GO Marathon and 1994 and newer E-Z-GO Medalist and TXT with 22 tooth spiral gears with 19 spline output to motor, includes both bearings, all O-rings and C-clips

21 Tooth Input Shaft Kit
Price: $126.75

Part Number: AX236

OEM Part Numbers - 26926-G01

Item Description -
21 Tooth Input Shaft Kit for 1991 to 1994 Electric E-Z-GO Marathon and 1994 and newer Medalist and TXT models with 21 tooth spiral gears with 19 spline output to motor, includes both bearings, all O-rings and C-clips

Balace Shaft, Motor & Wheel Bearing
Price: $7.80

Part Number: BE125

OEM Part Numbers - HD 30150-67, 90004-90, CC 1011290, 1012877, EZ 16918-G1, 23520-G1, 27630-G13, JA 343667, TD 80-201-00, TO 251-6, CU 812009, 824753, 832498, YA 93306-20304, 93306-20309, 93306-20310, 93306-20314, 93306-20316, 93306-20324, 93306-20331, 93306-20345, 903306-203X1, J56-H1857-00-00, HY GB1-801003

Item Description -
Balancer Shaft Bearing on 1995 and newer Club Car 4 cycle, also 1984 to 1991 Club Car gas balancer shaft clutch side, camshaft flywheel side and electric motor brush end from 1981 and newer (except IQ system), E-Z-GO electric motor brush end on 1980 to 1996, also Jacobsen, Taylor Dunn, Toro, Cushman, also Yamaha front outer wheel bearing for G1 from 1978 to 1981 and electric motor brush end on 1990 and newer G8, G9, G14, G16, G19 and G20, Also Hyundai. Dimensions: .66" (16.8mm) I.D. by 1.57" (39.9mm) O.D. by .47" (11.9mm) W.

Bearing, Crankcase, Axle, Wheel, & Motor
Price: $16.77

Part Number: BE126

OEM Part Numbers - HD 9030, 9034, 72381-72, 83269-79, EZ 15488-G1, 51320-G1, CU 605636, 808058, 821291, 823011, 824703, 835011, YA 93306-20401, 93306-20417, 93306-20420, 93306-20421, 93306-20437, 93306-20469, 93306-204X0, J10-81856-10 TD 80-200-00, DA 56226, JA 315947, ND 20383

Item Description -
Crankcase Bearing for 1963 to 1981 Harley Davidson, for clutch and flywheel side, also 1983 and newer outer front wheel bearing on 4 wheel Harley, E-Z-GO motor bearing, Cushman rear axle bearing, Outer Wheel Bearing for 1982 to 2002 Yamaha models G1, G2, G8, G9, G14, G16, G20, G21, and electric front wheel inner G22, also Electric Motor Bearing for brush end on 1978 to 1991 models G1 and G2 and 1981 to 1984 Club Car both with Hitachi 10 internal spline motor, also for 1979 to 1982 Harley with Hitachi motor., In addition rear axle bearing on Taylor Dunn, Davis, Jacobsen, and Nordskog NOTE: Club Car used this bearing on the front wheel in 2003 on electric carts after serial number AQ344-343603 and on gas carts after serial number AG0343-342005. Dimensions: .78" (19.9mm) I.D. by 1.85" (47mm) O.D. by .5" (14mm) wide.

Motor Seal
Price: $5.66

Part Number: BE220

OEM Part Numbers - 12639-G1

Item Description -
Drive End Electric Motor Seal for 1977 to 1984 E-X-GO model X444 Marathon, 1.060" (26.9mm) I.D. by 1.580" (40.1mm) O.D. by .300" (7.7mm) Width

Commutator Bearing
Price: $13.46

Part Number: BE601

OEM Part Numbers - ME 500131, EZ 50266-G1, CU 814274, ND 11157

Item Description -
Bearing for Commutator end on electric motor on Melex models 101, 102, 112, 212, 152, 252 and 412, Also early E-Z-GO, Cushman, and Nordskog.

Motor Bearing
Price: $64.50

Part Number: BE602

OEM Part Numbers - ME 500130, EZ 50277-G1, ND 10777, HD 72381-66

Item Description -
Bearing for Drive end with Pinion Gear on electric motor on Melex models 101, 102, 112, 212, 152, 252 and 412, Also early E-Z-GO, Nordskog Westinghouse models 436 and 437, and Harley Davidson with old style GE motor.

Brush Assembly
Price: $62.40

Part Number: BR100

OEM Part Numbers - HD 83283-86, CC 1011410, 1011282, ME 520108, CU 886026, TD 70-104-00, LE 5561-2, ND 20953, HY GB1-801062

Item Description -
Brush Assemblies for GE motors used on 1986 to 1990 Harley-Davidson, Club Car 1980 to 1993 36 volt, Melex 1985 and newer models 412, 512, and 625, Cushman, Taylor Dunn, Legend, Nordskog and Hyundai. length 1-7/16" long, 5/8" wide, 1/2"deep. Set includes two assemblies.

Brush Set
Price: $58.55

Part Number: BR101

OEM Part Numbers - HD 70491-73, CC 7363, EZ 15634-G1, 51318-G1, CU 882960, 883663, TD 70-101-00, ND 20753, PA 2227-3, NO M-14, OT A-56224

Item Description -
Brush Set for GE Motors used on Harley Davidson model DE3 from 1977 to 1978 and model DE40 from 1976 to 1978, Club Car 1976 to 1980, E-Z-GO 1973 to 1979, HMK Marketeer models 438 and 439 and model 450 4-Runner, Cushman, Taylor Dunn, Nordskog, Pargo, Noland and Otis .(set of 4), length 1-3/16" long by 5/8" wide by 1/2" thick.

Brush Set
Price: $39.37

Part Number: BR102

OEM Part Numbers - HD 70491-63, 72367-72, CC 7363, 8089, 8785, EZ 50278-G1, 72368-G01, CU 807329, 824251, 882960, TD 70-100-00, ME 500117, PA 3365-3, OT A-20663, WE 20663, A2623A54H02, A2623A54H03

Item Description -
Brush set for GE Motors used on 1963 to 1971 Harley Davidson models DE, DEF, DEC and 1972 to 1975 models DE and DE4, Club Car pre 1980, E-Z-GO 1965 to 1972, also Cushman, Taylor Dunn, Melex pre 1985 models 102, 202, 112, 212, 152, 252, and early 412 with band brake on motor, also Pargo as well as Westinghouse Motors used on 1965 to 1976 Westinghouse Marketeer models 436, 436G, 437 and 437A, and 529 Chariot, also Otis, Nordskog and others using Westinghouse motors (set of 4), length 1-5/8" long, 5/8" wide, 1/2" deep with spring hook. NOTE: Used with both GE and Westinghouse motors

Brush Spring
Price: $2.40

Part Number: BR104

OEM Part Numbers - HD 83287-86, CC 1011411, EZ 15446-G1, CU 824754, TD 85-412-00, DA 56225, LE 2227-5, NO M-12, ND 10556, OT A-56225, PA 2227-5

Item Description -
Brush Spring for G.E. Motor used by Columbia/Harley-Davidson, Club Car 1984 and newer, E-Z-GO new style G.E. motor, HMK Marketeer models 438 and 439, Melex 1985 and newer models 412, 512, and 625, also Cushman motor brush spring and speed board brush spring, Taylor Dunn, Davis, Legend, Noland, Nordskog, Otis, Pargo, and Yamaha G8, G9, G14, G16.

Brush Spring
Price: $8.37

Part Number: BR105

OEM Part Numbers - HD 72383-66, EZ 50280-G1, CU 814289, TD 85-401-00, ME 500115, ND 20433, PA 3365-5

Item Description -
Pull Type Brush Spring for GE Motors used on 1963 to 1971 Harley Davidson models DE, DEF, DEC and 1972 to 1973 models DE and DE4, also E-Z-GO, Club Car pre 1980, Cushman, Taylor Dunn, Melex pre 1985 models 102, 202, 112, 212, 152, 252, and early 412 with band brake on motor, Also Westinghouse Marketeer models 436, 436G, 437 and 437A and 529 Chariot, and Nordskog, and Pargo .

Brush Set
Price: $39.23

Part Number: BR107

OEM Part Numbers - HD 70491-73, 82842-86, CC 7363, EZ 15445-G1, 15634-G1, PA 2227-3, TD 70-105-00, NR 20753, DA 56224

Item Description -
Brush Set for GE Motors with cable lead crossovers used on Harley Davidson from 1986 to 1990, Club Car 1981 to 1985, HMK Marketeer from 1976 to 1977 models 438 and 439 and model 450 4-Runner, also E-Z-GO, Pargo, Taylor Dunn, Nordskog and Davis.(set of 4), length 1-7/16" long by 5/8" wide by 1/2" thick. NOTE: similar to BR101 except this brush has a groove in the top for the brush spring

Brush Holder Assembly
Price: $91.65

Part Number: BR108

OEM Part Numbers - HD 83268-75, OT A-56223

Item Description -
Complete Brush Holder Assembly with Brushes, Springs and Crossovers for old style G.E. motor with flat bar brush crossovers for Harley-Davidson, E-Z-GO, Cushman, Taylor Dunn, Nordskog, Otis, and Pargo. NOTE: This will directly replace old GE brush holder assemblies using the cable type cross overs, our number BR114

Brush Crossover Bar
Price: $42.90

Part Number: BR112

OEM Part Numbers - HD 83268-75, EZ 13406-G1, CU 882961, TD 70-196-00, NO M-10, ND 72274, OT A-56236, PA 2227-40

Item Description -
Brush Crossover Bar with glass cloth, without pad for early Harley Davidson with G.E. Motor, also HMK Marketeer models 438 and 469 and E-Z-GO, Taylor Dunn, Noland, Nordskog, Otis, and Pargo with G.E. motor with flat bar brush connect cross overs

Brush Crossover Bar
Price: $42.90

Part Number: BR113

OEM Part Numbers - HD 83268-75, EZ 13407-G1, CU 882962, TD 70-196-00, NO M-11, OT A-56237, PA 2227-41

Item Description -
Brush Crossover Bar with glass cloth, includes fish pad for early Harley Davidson with G.E. Motor, also E-Z-GO, Taylor Dunn, Noland, Nordskog, Otis, and Pargo with G.E. motor with flat bar brush connect cross overs

Crossover Cable with Stud
Price: $40.95

Part Number: BR114

OEM Part Numbers - HD 82840-86, EZ 15443-G1, CU 882964, TD 70-196-00, PA 2227-41

Item Description -
Brush Crossover Cable with Stud for Harley Davidson with G.E. Motor with brush cable interconnects, also E-Z-GO, Cushman, Taylor Dunn, and Pargo

Brush Holder
Price: $62.40

Part Number: BR205

OEM Part Numbers -EZ 16916-G1, 16916-G2, CC 1011284, HD 83284-86, LE 5561-1
Item Description -
Brush Holder with Springs for 1980 to 1992 E-Z-GO with G.E. Motor, Club Car 1984 to 1993 36 volt, Columbia Harley 1986 to 1990, and Legend

BR206
Price: $68.25

Part Number: BR206

OEM Part Numbers - EZ 27630-G05, CC 1017946, ME 520108, YA JH7-H1801-00 GE Motor #s 5BC48JB868, 5BC48JB882, 5BC58JBS6259

Item Description -
Brush Set with Hex Stud for 19 Spline, 2 HP, 2800 RPM G.E. 36 Volt Fleet Speed Motor style JBS, our part number MT209, for 1988 and newer E-Z-GO non DCS and PDS, 1994 and newer Club Car, also 1990 to 2002 Yamaha G8, G9, G14 and G16, and Melex model 412 and later without brake on motor, also Hyundai with 19 spline, Dimensions: 1-3/8" long by 5/8" wide by 1/2" thick

Field Coil Repair Stud
Price: $5.45

Part Number: MT110

OEM Part Numbers -

Item Description -
Copper Field Coil Repair Stud with square shoulder for Harley Davidson, E-Z-GO, Club Car, and many others with GE Motor, 5/16"-18 by 1-1/2" long

Repair Stud, Screw On
Price: $5.99

Part Number: MT111

OEM Part Numbers -

Item Description -
Screw On Motor Repair Stud for repairing broken field coil studs on GE Motors, 5/16" by 18 coarse thread

Fiber Washer
Price: $2.45

Part Number: MT112

OEM Part Numbers -HD 83260-75, 83289-86, CU 823015, 824710, EZ 15442-G1, 50309-G1, 51330-G1, DA 56236, NO M-13, PA 2227-11, ND 70621, 70771

Item Description -
Round Fiber Washer for old style GE Motors used on Harley Davidson, Cushman, E-Z-GO, Davis, Noland, Pargo, Nordskog and others, has .475 hole, goes on inside where stud field stud or brush stud goes through the brush housing

Fiber Washer
Price: $2.85

Part Number: MT113

OEM Part Numbers -HD 83256-75, 83288-86, CU 814316, 824718, EZ 15438-G1, 50289-G1, 51327-G1, DA 56233, NO M-6, LE 2227-38, ND 70611, PA 2227-13, 3365-13

Item Description -
Round Fiber Washer for old style GE Motors used on Harley Davidson, Club Car, Cushman, E-Z-GO, Davis, Noland, Otis, Legend, Taylor Dunn and Pargo and others, has .330 hole, goes on outside where field stud or brush stud goes through the brush housing

Square Fiber Washer
Price: $3.65

Part Number: MT114

OEM Part Numbers -HD 72342-73, CU 823016, 824712, EZ 15477-G1, 50310-G1, 51336-G1, NO M-21, MR 70631

Item Description -
Square Fiber Washer for old style GE Motors used on Harley Davidson, Cushman, E-Z-GO, Noland, HMK Marketeer and others, has .330 hole, goes on outside where field stud or brush stud goes through the brush housing

Square Insulating Bushing
Price: $3.79

Part Number: MT115

OEM Part Numbers -HD 83262-75 , 82836-86, CU 821124, 824717, EZ 15436-G1, 50310-G1, 51325-G1, DA 56231, LE 2227-37, NO M-5, MR 70591, ND 70601, PA 2227-12, 3365-12

Item Description -
Square Insulating Bushing for old style GE Motors used on Harley Davidson, Club Car, Cushman, E-Z-GO, Davis, Legend, Noland, Nordskog, HMK Marketeer, Pargo and others, has .335" hole and is .345" thick, goes goes in the brush end bell where field stud or brush stud goes through the brush housing

Square Insulating Bushing
Price: $3.65

Part Number: MT116

OEM Part Numbers -HD 72352-73 , 82837-86, CU 823014 , 824711, EZ 15437-G1, 31654-G1, 51326-G1, DA 56232, LE 2227-37, NO M-4, ND 70591

Item Description -
Square Insulating Bushing for old style GE Motors used on Harley Davidson, Club Car, Cushman, E-Z-GO, Davis, Noland, Nordskog Marketeer and others, has .335" hole and is .227" thick, goes in the brush end bell where field stud or brush stud goes through the brush housing

Motor Insulating Bushing Kit
Price: $11.70

Part Number: MT117

OEM Part Numbers -HD 82837-86, CC 1011407, CU 824711, EZ 15437-G1, DA 56232, LE 2227-37, NO M-4

Item Description -
G.E. Motor Insulating Bushing Kit for G.E. Motor with Square Insulating Bushing which is .227" thick with .335" hole for old style GE Motors used on Harley Davidson, 1984 to 1993 Club Car, Cushman, E-Z-GO, Davis, Noland, and others, Includes the plastic square bushing, two fiber washers, one with a .330" hole and the other with a .475" hole plus one 5/16" steel washer and one 5/16" serrated nut.

High Speed Motor
Price: $697.50

Part Number: MT201

OEM Part Numbers - Replaces GE #s 5BC48JB509, 5BC48JB509A, 5BC48JB509B, 5BC48JB509C, 5BC48JB509D, 5BC48JB509E, 5BC48JB563, Prestolite #s MKF 4001, MKF 4001A, MKX 4001, MKX 4003

Item Description -
10 Spline, Dual Shaft 36 Volt High Performance Motor for July 1971 to 1975 E-Z-GO with brake on motor, 3.5 Horsepower, 3500 RPM, will increase speed from 12 mph to 18-19 mph, includes motor housing with seal that bolts to differential. NOTE: If you have a 1965 to June of 1971 motor with a tapered spiral gear output shaft with a square housing mounting flange I can have these rebuilt if your output shaft/armature are not broken. These motors were GE motor numbers 5BC48JB189 and 5BC48JB223, Call for pricing on a rebuild

High Speed Motor
Price: $637.50

Part Number: MT202

OEM Part Numbers -Replaces the following OEM numbers EZ 13485-G1, 13329-G1, 14877-G1 OEM GE # 5BC48JB563A, 5BC48JB563B, 5BC48JB563C, 5BC48JB644, 5BC48JB644A, 5BC48JB644B, 5BC48JB645A, 5BC48JB645B, 5BC48JB700, Prestolite MKX 4003, MR 72154

Item Description -
10 Spline, 36 Volt High Performance Motor for 1976 to 1986-1/2 E-Z-GO and HMK Marketeer models 438 and 439, 3.5 Horsepower, 3500 RPM, will increase speed from 12 mph to 18-19 mph, includes motor housing with seal that bolts to differential. NOTE: This is a single shaft motor for carts with brakes on rear wheels.

High Torque Motor
Price: $745.50

Part Number: MT206

OEM Part Numbers - Replaces the following OEM numbers EZ 13485-G1, 13329-G1, 14877-G1 OEM GE # 5BC48JB563A, 5BC48JB563B, 5BC48JB563C, 5BC48JB644, 5BC48JB644A, 5BC48JB644B, 5BC48JB645A, 5BC48JB645B, 5BC48JB700, Prestolite MKX 4003, MR 72154

Item Description -
Very High Torque 36 Volt, 5 hp Motor for 1976 to 1986-1/2 E-Z-GO and HMK Marketeer models 438 and 439, includes motor housing with seal that bolts to differential. Note: Can be used with existing speed control without upgrading. Very efficient motor, draws less amps than the stock motor. Recommended for use with lifted carts. With stock tires it will go 11 to 12 mph, faster with larger tires. NOTE: This is a single shaft motor for carts with brakes on rear wheels.