|
Woodruff Key for Starter/Generator Pulley on late 1969 to 1995 Harley Davidson and Columbia Par Car 2 cycle gas models with either Bosch or Hitachi starter/generators +++ 1984 to 1996-1/2 Club Car generator pulley +++ 1990 to 1995 Hynudai starter/generator pulley +++ Melex and E-Z-GO with Hitachi starter/generator +++ Also Cushman brake cam.
|
|
|
5/16" Type B Flat Washer for Battery Hold Down Rod on 1981 to 2006 Club Car electric model DS +++ Also can be used with many other battery hold rods and other applications.
|
|
|
Black Polyurethane Leaf Spring Bushing for both front and rear on 1970 to 1980 Club Car Caroche model +++ 1981 and newer gas and electric Club Car models DS, Carryall and Precedent +++ Lower Outboard A-Plate Bushing for 1984 to 1985 and 1992 ONLY Club Car DS +++ 2008 and newer E-Z-GO RXV model bushing at rear of rear leaf spring.
|
|
|
Throttle Return Spring for 1981 to 1995 Club Car models with FE290 or FE350 engines.
|
|
|
Nylon Accelerator Pivot Rod Support Bearing for 1992 and newer Club Car model DS and XRT800 +++ Also 2008 and newer XRT810.
|
|
|
Steering Column Spring for 1987 and newer gas and electric Club Car model DS.
|
|
|
Stainless Steel Bag Hook Nut for 1965 to 1981 gas and electric Harley Davidson and 1982 to 1987 Columbia Par Car gas and electric models +++ Many other applications.
|
|
|
Steering Shaft Spacer for 1987 ONLY gas and electric Club Car model DS.
|
|
|
Steering Column Snap Ring for 1984 and newer gas and electric Club Car model DS.
|
|
|
Short Shoulder Bolt for A-Plate Sub Assembly on 1979 to 1980 electric Club Car Caroche model and 1981 to 1992 Club Car gas and electric model DS.
|
|
|
Short Sleeve Bushing for Delta A-plate on 1993 and newer Club Car gas and electric model DS.
|
|
|
Shock Reducer Bushing for ST300 Shock absorber used on many Cushman vehicles +++ Used on rear shocks on E-Z-GO and Pargo 900 series +++ Upper sleeve on 1975 to 1985 Taylor-Dunn Tee Bird models GT-370 and GT-371 +++ 5/8" O.D. down to 7/16" I.D.
|
|
|
Shock Reducer Bushing for ST300 Shock absorber +++ For use when using this shock on rear of 1971 to 1994 E-Z-GO gas carts +++ 5/8" O.D. down to 3/8" I.D.
|
|
|
Shock Absorber Bushing Kit for all years E-Z-GO, Club Car, Melex, Cushman, Westinghouse, Taylor-Dunn +++ Also many others.
|
|
|
Input Gear Retaining Snap Ring for 1986-1/2 and newer E-Z-GO electric +++ 1993 to 2013 Columbia Par Car electric +++ 1990 to 1995 Hyundai +++ 1990 to 2008 Yamaha electric models G8-G27 +++ 2005 & newer Cushman Titan, 875 and Personnel Carriers +++ 1986 & newer Melex electric models 412E, 512E & 625E +++ 1998 and newer Taylor-Dunn model R-380 +++ 1992 and newer Nordskog model 280A.+++ Motrec 330-E and other models +++ All with Dana electric differential +++ Rear Axle Bearing Retainer for 1970 to 1980 Club Car Caroche, Pargo golf carts, early E-Z-GO golf carts and mid 1980s burden carriers, All with Terrill differentials.
Retail: |
$5.30 |
On Sale: |
$3.45 |
You Save: |
35% |
|
|
|
Brake Cable E-Type Retaining Ring for 1981 and newer Club Car model DS +++ For Hand Brake Cable on 1969 to 1972 Harley Davidson gas model DC +++ Foot Brake Cable on 1976 to 1977 electric model DE-40 +++ 1977 and newer E-Z-GO +++ Cushman, Columbia Par Car, Jacobsen and Legend.
Retail: |
$1.99 |
On Sale: |
$0.67 |
You Save: |
67% |
|
|
|
Retaining Ring for holding ramp plate to fixed face hub assembly on Salsbury/Comet style drive clutch used Melex gas models 512 and 625 +++ Also 1984 to 1987 Club Car DS model with 341cc KF-82 engine for serial number AG8414-53441 thru AG8801-13720 +++ Also for 1990 to 1995 Hyundai gas carts.
|
|
|
Retaining Ring for Bell Crank Lever in Electrical Component Box on 1992 and newer Club Car gas model DS.
|
|
|
Factory O.E.M. Resistor Coil Stand-Off for 1989 to 2003 Club Car 36 and 48 volt model DS carts.
|
|
|
Steel Oversized Rear Bumper Washer used on 1963 to 1973 gas Harley Davidson models D, DF, and D4 and 1963 to early 1969 electric models DE and DEF +++ Many other applications.
|
|
|
Push Nut for Hill Brake Pedal Pin for 1980 and newer Club Car model DS.
|
|
|
Black Polyurethane performance upgrade Bushing for Shock Absorber and Engine Stabilizer 1967 to 1997 Harley Davidson and Columbia Par Car +++ Also upper shock bushing on 1971 to 1994 E-Z-GO Marathon 2 cycle gas and 1991 to 1994, 4 cycle gas +++ Also lower shock mount busing on Melex 3 wheel model 102 +++ Also other shocks with 5/8" shock bushings.
|
|
|
Red Polyurethane performance upgrade Bushing for Shock Absorber and Engine Stabilizer 1967 to 1997 Harley Davidson and Columbia Par Car +++ Upper shock bushing on 1971 to 1994 E-Z-GO Marathon 2 cycle gas and 1991 to 1994, 4 cycle gas +++ Lower shock mount busing on Melex 3 wheel model 102 +++ Also other shocks with 5/8" shock bushings.
|
|
|
3/8"-24 thread Inverted Flare Plug for blocking off unused ports on master cylinder banjo fittings and other brake line fittings on Club Car, Cushman, Taylor-Dunn and others.
|
|
|
Hill Brake Pivot Bushing for 1980 and newer Club Car gas and electric model DS.
|
|
|
Hairpin Style Clip for Accelerator Cable Clevis Pin for 1979 to 2009 Yamaha gas models G1, G2, G3, G5, G8, G9, G11, G14, G16, G19, G20, G21, G22, G23, G27, G28 +++ Also 2007 and newer Yamaha model YDR, "The Drive" +++ Also 1986 to 1997 Taylor-Dunn model R-680 truck +++ Many other applications.
|
|
|
NO LONGER AVAILABLE +++ Park Brake Return Spring for 1970 to 1973 Club Car Caroche model.
|
|
|
Nylock Nut for Battery Hold Down Rod for Club Car Precedent models from 2004 and newer. +++ Top of Shock and King Pin Nut on 1981 and newer model DS +++ 1967 and newer Harley Davidson and Columbia Par Car, many applications +++ 1989 & newer E-Z-GO, too many applications to list.
Retail: |
$1.08 |
On Sale: |
$0.47 |
You Save: |
57% |
|
|
|
14mm by 1.5 tpi Nut for Starter/Generator on 1969 to 1981 Harley Davidson and 1982 and newer Columbia Par Car +++Also fits all Bosch, Hitachi, Reliance and others used on E-Z-GO, Club Car, Hyundai, Melex and Yamaha.
|
|
|
1/2-20 Steel Lug Nut for 1974 and newer Club Car +++ Also Harley Davidson and Columbia Par Car +++ Also all years of E-Z-GO +++ Also Cushman, Taylor Dunn, Jacobsen, Motrec, and others,
|
|
|
Long Sleeve Bushing for Delta A-plate on 1993 and newer Club Car gas and electric model DS.
|
|
|
Locking Chrome Lug Nut Set of four with key +++ Has 1/2"-20 threads per inch
|
|
|
2" Hose Clamp for air hose on many carts.
|
|
|
Governor Rod for 1984 to 1991 Club Car model DS with with 341cc KF-82 Kawasaki side valve flat head engine +++ Obsolete from Club Car
|
|
|
Front Suspension Rebuild Kit for 1993 and newer Club Car gas and electric model DS.
|
|
|
Front Leaf Spring to King Pin Bolt for 1981 and newer Club Car gas and electric model DS.
|
|
|
Front Bumper Flanged Metric Lock Nut for mounting BD44-290 front bumper on 2004 and newer Club Car Precedent model +++ Use with BD44-293 bolt +++ Two required +++ Other carts and applications
|
|
|
Front Bumper Carriage Bolt for 1984 to 1992 Club Car model DS +++ Uses mounting nut number BD427B +++ Two each required.
|
|
|
Front and Rear Suspension Rebuild Kit for 2004 and newer Club Car gas and electric model Precedent.
|
|
|
Forward and Reverse Bell Crank for 1984 and newer Club Car.
|
|
|
Rubber Bushing for Shock Absorber and Engine Stabilizer 1967 to 1997 Harley Davidson and Columbia Par Car +++ Upper shock bushing on 1971 to 1994 E-Z-GO Marathon 2 cycle gas and 1991 to 1994, 4 cycle gas +++ Lower shock mount busing on Melex 3 wheel model 102.
|
|
|
NO LONGER AVAILABLE +++ Electrical Component Box for 1992 and newer Club Car gas model DS.
|
|
|
Seat Brake Lockout Knob E-Clip Retaining Ring for 1976 and 1977 Harley Davidson model DE-40 +++ 1979 to 1982 model MGIV +++ 1980 to 1981 Governor Control Cable End Retaining E-Clip used on FU11-108 +++ 1/4"
|
|
|
Small Hole Copper Washer for Banjo Bolt on Master Cylinder on 1970 to 1980 Club Car electric Caroche model +++ Cushman Truckster and Titan models +++ Taylor-Dunn +++ 1974 to 1980 Elmco Royal Ride +++ 1974 to 1976 Pargo electric model 544 +++ Mid 1970s Eagle golf cart made in Long Beach California by Lad Industries +++ All with Mercury hydraulic brakes.
|
|
|
Large Hole Copper Washer for Banjo Bolt on Master Cylinder on 1970 to 1980 Club Car electric Caroche model +++ Cushman Truckster and Titan models +++ Taylor-Dunn +++ 1974 to 1980 Elmco Royal Ride +++ 1974 to 1976 Pargo electric model 544 +++ Mid 1970s Eagle golf cart made in Long Beach California by Lad Industries +++ All with Mercury hydraulic brakes.
|
|
|
NONE AVAILABLE +++ Electrical Component Box Cover for 1992 and newer Club Car gas model DS.
|
|
|
Parking Brake Clevis for 1969 to 1985 Taylor-Dunn model B-248 and others.
|
|
|
Parking Brake Clevis for Taylor-Dunn.
|
|
|
5/16" by 1-1/8" Brake Cable Clevis Pin for Taylor-Dunn and others +++ 7/8" usable area.
|
|
|
5/16" x 1" Clevis Pin for 1976 and newer E-Z-GO Brake Cables +++ 1981 and newer Club Car +++ Harley Davidson, Columbia Par Car +++ Cushman +++ Taylor-Dunn +++ Davis +++ Jacobsen +++ Karrior +++ Legend +++ Melex +++ Nordskog +++ Pargo +++ Many other carts and applications as well +++ Has 3/4" usable length.
|
|