Matched Drive Belt Set of 3 belts for 1955 to 1958 Cushman Golfster series 732-12 to 732-74.

Driven Secondary Clutch for Cushman models with 10 hp Kohler.

Primary Drive Clutch Spring Kit, (Blue), for 1989 to 1994 Cushman GT-1 with 8 hp Kohler +++ 1991 to 1993 Cushman GT America +++ 1991 to 1994 Bellhop-2 and 1994 UTV-MAX +++ Also Taylor-Dunn

Roller Arm Kit for Salsbury/Comet style drive clutch used on Melex gas models 512 and 625 +++ Also 1984 to 1987 Club Car DS model with 341cc KF-82 engine for serial number AG8414-53441 thru AG8801-13720 +++ Also Cushman +++ Also for 1990 to 1995 Hyundai gas carts.

Drive Belt for 1965 to 1966 Cushman Trophy series 732 and 1966 Series 731 Industrial Director model both with 10 HP Kohler K241 engine.

Primary Clutch Idler Bearing for Cushman models GC300 and GC400 and Town and Fairway gas models 881859 and 898201 +++ Also Deluxe and Executive models 881412 and 881414 and others.

Replacement Rubber Brake and Clutch Pedal Pad for 1959 and newer Cushman Turf Truckster and Haulster +++ 1959 to 1968 Titan series 734 models 876109, 878424, 878913, 879715, 880023, 880728.

Drive Belt for 1980 to 1984 Cushman Mini Miser electric.

Clutch Pressure Plate for 1960 and newer Cushman model 735, Truckster, or Haulster with 18 or 22 Horsepower OMC engine. +++ 1989 to 1990 E-Z-GO GTX-1500 and GXI-1500 with Onan engine +++ Also Jacobsen Industrial Vehicles with Onan gas engine.

Matched Drive Belt Set of 3 belts for 1960 Cushman Golfster series 732 models +++ Also 1959 Titan & Truckster models.

Driven Clutch for 1989 to 1994 Cushman GT-1 with 8 hp Kohler +++ 1991 to 1993 Cushman GT America +++ 1991 to 1994 Bellhop-2 +++ 1991 to 1994 GT1, UTV-MAX and GT MAXIM with with 1200 pound capacity and 14 hp Briggs and Stratton Vanguard engine +++ 1996 and newer GT1 898369E, UTV MAX 898669E, Hawk models 898769E and 898771 and Hawk II models 898789E and 898791 +++ Late 1990s Jacobsen Hawk models 797012, 797013 and 797025.

Matched Drive Belt Set of 3 belts for 1960 to 1970 Cushman electric series 731, 732 and Titan.

Clutch Throw Out Bearing for 1960 and newer Cushman model 735, Truckster or Haulster with 18 or 22 Horsepower OMC engine.

Driven Secondary Clutch for 1996 and newer Cushman models GT-1, GT-1E, UTV MAX, UTV MAXIM, Hawk and Hawk II +++ 9-1/4" diameter.

Clutch Throw Out Bearing for 1998 to 2005 Cushman Truckster with 970 Suzuki four cylinder 34 hp gas engine or Perkins diesel engine.

Matched Drive Belt Set of 3 belts for 1968, 36 Volt Champion Golf Car Series 732 model 881604 +++ Also 1969 model 881854 +++ Also 1968 to 1969 Cushman Executive 36 volt electric Industrial cart Series 731 model 881608 and 1970 model 898306.

Secondary Driven Clutch for 1990 to 1994 Cushman Bellhop-3 and Bellhop-4. --- Also F2J... All with 18hp engine.

Clutch Throw Out Bearing ONLY for 1960 and newer Cushman model 735, Truckster or Haulster with 18 or 22 Horsepower OMC engine... Also 1989 to 1990 E-Z-GO GTX-1500 and GXI-1500 with Onan engine... Also Jacobsen Industrial Vehicles with Onan gas engine.

Clutch Throw Out Bearing for 1988 to 2003 Cushman Truckster & Haulster with 327 Diahatsu 27hp three cylinder engine +++ Also Kubota and Perkins diesel engines.

Clutch Disc for 1960 and newer Cushman model 735, Truckster and Haulster with 18 or 22 Horsepower OMC engine.

Centrifugal Clutch Mounting Plate Pilot Bearing for 1960 and newer Cushman model 735, Truckster, or Haulster with 18 or 22 Horsepower OMC engine.

Drive Belt for 1963 to 1966 8hp gasoline Cushman Golfsters +++ Also Nassau golf cart with 7hp Kohler.

Bearing and Collar for 1991 to 1994 Cushman GT1 beginning with serial number extension 9110 for models 898369 and 898370 +++ Mounts on power frame and acts as secondary clutch thrust bearing.

Drive Belt for 1987 to 1988 gasoline Cushman Eagle model 898552

Drive Belt for 5hp 1966 to 1967 Cushman Minute Miser series +++ 1973 to 1977 8hp Cushman Turf Miser +++ 1965 to 1970 series 736 Cushman Scotsman

Drive Belt for 1965 to 1975 8hp Kohler gasoline Cushman.

Driven Secondary Clutch for 1965 to 1974 Cushman Trophy, Executive, Director, GC-300, GC-400 and Town and Fairway models with 10 hp Kohler.

Drive Belt for 8hp 1979 and newer Cushman Minute Miser model 818319 +++ 1981 to 1984 8hp Cushman Turf Cart model 898549

Drive Belt for 1994 and newer E-Z-GO Medalist and TXT models with 4 cycle gas engines

Drive Belt for 1990 to 1994 gasoline Cushman GT-1 +++ 1991 to 1993 Cushman four wheel GT America +++ 1991 to 1994 Cushman Bellhop-2 +++ 1992 to 1994 Cushman model F2.

Drive Belt for 1991 to 1994 gasoline Cushman GT-1 with 14 HP Briggs and Stratton Vanguard engine with Salsbury clutch +++ Also 1994 UTV-MAX with 14 HP engine.

Drive Belt for 1991 and newer Hyundai gas model HGG-1 +++ Also 1994 to 1996 Cushman Sprinter model 898600 with Suzuki four stroke engine.

Primary Drive Clutch for 1989 to 1994 Cushman GT-1 with 8 hp Kohler +++ 1991 to 1993 Cushman GT America +++ 1991 to 1994 Bellhop-2 and 1994 UTV-MAX +++ 1996 and newer Cushman Hawk with 14hp Vanguard engine +++ Replaces obsolete expanding shoe style used on 1965 to 1966 Trophy model Golfster +++ Also Taylor-Dunn model G-150

Primary Drive Clutch for 1964 to 1970 Cushman models with 8 hp Kohler engine model 181 with 1 inch diameter straight keyed output shaft+ Also for Tripcoe T-Birdee with 8hp Kohler and others.

Primary Drive Clutch Bushing and Pivot Pin Kit for 1989 to 1994 Cushman GT-1 with 8 hp Kohler +++ 1991 to 1993 Cushman GT America +++ 1991 to 1994 Bellhop-2 and 1994 UTV-MAX +++ Also Taylor-Dunn.

CURRENTLY UNAVAILABLE ++ Front Transmission Bearing Gasket for 1961 to 1964 Cushman model 735 +++ 1965 to 1994 Cushman Truckster +++ Also Haulster with 18 or 22 Horsepower OMC engine.

Rear Transmission Bearing Gasket for 1961 to 1964 Cushman model 735 and 1965 to 1994 Cushman Truckster +++ Also Haulster with 18 or 22 Horsepower OMC engine.

Transmission Bearing for many Cushman models from 1965 to 1995 +++ Transaxle Inner Input Shaft Bearing for 1988 and newer E-Z-GO electric and 1991 and newer E-Z-GO 4 cycle gas +++ 1984 to 1991 Club Car gas Dynamic Balancer bearing +++ Also 1990 to 2013 Columbia Par Car electric input shaft bearing and gas balancer shaft bearing +++ Also 1986 to 2014 Yamaha electric input shaft bearing and electric steering pinion bearing +++ Also Taylor-Dunn, Hyundai, Nordskog and Motrec input shaft bearing on electric Dana differential +++ Also used on Toro with Dana differential..

Clutch Pressure Plate for 1989 and newer Cushman 327 water cooled three cylinder 27hp Diahatsu or Kawasaki engines for Truckster and Haulsters.

Clutch Disc for 1989 and newer Cushman Truckster and Haulsters with water cooled three cylinder 27hp 327 Diahatsu or Kawasaki engines.

Clutch Disc for Cushman Truckster and Haulsters water cooled four cylinder with 970 Suzuki engine.

Cushman Flat Style Motor and Transmission Mount Pad for 1953 to 1959 Cushman Truckster and Mailster with Husky flat head 7 hp and 7.95 hp engine +++ 1967 to 1973 Cushman Truckster, Haulster and Mailster with 8 hp and 12 hp Kohler engines +++ 1961 to 1964 Cushman 725 Golfster +++ 1961 to 1981 Cushman Haulster, Truckster and Mailster with OMC 9 hp, 18 hp and 22 hp engines.

Main Drive Gear Bearing with external snap ring for 1965 to 1968 Cushman Turf Truckser and Haulster and 1970 to 1994 Haulster.

Ramp Shoe for Secondary Clutch on 1996 to 1998 Melex model 512G with red engine and 1998 and newer model 625G +++ Also 1997 and newer Taylor-Dunn model R-680 Roadmaster Truck +++ Also Taylor-Dunn model G-150 +++ Also for 1990 to 1994 Cushman Bellhop-3 and Bellhop-4, F2 and F2J as well as Hawk, GT1, and GT America +++ Also for 2006 and newer Columbia Par Car with with 13 HP Briggs and Stratton Vanguard engine.

Transmission Bearing for 1965 to 1994 Cushman Turf Truckser and Haulster.

Shift Linkage Bushing for 1960s to 1970s Cushman Truckser and Haulster.

Commutator End Bearing for Starter/Generator on 1972 to 1995 Harley. +++ Com End on 1978 to 1993 E-Z-GO 2 cycle and 1991 and newer 4 cycle +++ Com End on Club Car +++ Com end on 1978 and newer Yamaha G1-G28 and YDR "The Drive". +++ Com end on Melex, and Hyundai +++ Com end on 1986 to 1997 Taylor-Dunn model R-680 truck. +++ Clutch Pilot Bearing for 1960 and newer Cushman model 735 and ruckster, or Haulster with 9hp, 18hp or 22hp OMC engine.

Brake and Clutch Pedal Return Spring for Cushman Haulster and Truckster +++ 6-7/8" long.

Primary Drive Clutch for 1990 to 1994 Cushman Bellhop-3 and Bellhop-4 and F2J with 18hp engine, model numbers 898374, 898584 and 898586.

NO LONGER AVAILABLE +++ Clutch Yoke for 1965 and newer Cushman Truckster or Haulster with 18 or 22 Horsepower OMC engine... Also later 327 engine.