|
.003" Oversize Wrist Pin Bearing for 1953 to 1961 Cushman 7 and 7.95hp with Husky cast iron engine.
|
|
|
Soft Aluminum Washer for Valve Cover Nuts on Cushman model 735 Golfster, Truckster, Haulster and others with 18 and 22 HP gas engines. OEM quality
|
|
|
NONE AVAILABLE +++ Valve Guide for Kohler models K161, 7hp, and K181, 8hp engines used on Cushman, Walker, and others.
|
|
|
Valve Guide for Kohler models K241, 10hp and K301, 12hp engines used on Cushman and others.
|
|
|
Square O-ring Style Valve Cover Gasket for Cushman model 735, Truckster, Haulster and others with 9 hp, 18 hp or 22 hp gas engines.
|
|
|
Transmission Mount Kt for 1953 to 1960 Cushman 780 series Truckster and Mailster with 7 hp or 7.95 hp Husky L-head engine.
|
|
|
Transmission Mount Kt for 1961 to 1964 Cushman model 735 Golfster with 18 hp OMC engine and 1961 to 1964 Truckster, Haulster and Mailster with 9 hp or 18 hp engine
|
|
|
Timing Belt for Cushman 27 horsepower Truckster and Haulster with 327 Diahatsu 3 cylinder engine after serial number OS53354 +++ NOTE: 103 teeth by 19mm (3/4") wide.
Retail: |
$127.74 |
On Sale: |
$67.37 |
You Save: |
48% |
|
|
|
Timing Belt for Cushman 27 horsepower Truckster and Haulster with 327 Diahatsu 3 cylinder engine before serial number OS53354 +++ NOTE: 103 teeth by 16mm (5/8") wide.
Retail: |
$127.74 |
On Sale: |
$67.37 |
You Save: |
48% |
|
|
|
Timer to Housing Gasket for Cushman model 735 Golfster, Truckster, Haulster and others with 18 and 22 HP gas engines.
|
|
|
Rear Stabilizer Bar Rubber Bushing for 1967 to 1975 Truckster, Haulster and Mailster +++ For rear stabilizer bar on 1970 for Cushman model 835 from 2004 to 2008 +++ Also Minute Miser from 2007 and newer. +++ Fits electric Tug from 2004 and newer.
|
|
|
14mm Taper Seat Spark Plug for Cushman with 18 or 22 HP engine with top mounted plug.
|
|
|
18mm Taper Seat Spark Plug for Cushman model 735 Golfster, Haulster, Truckster, Mailster & others with 18hp OMC engines with bottom mounted spark plugs.
|
|
|
14mm Spark Plug for Cushman with K181, 8 hp Kohler engine... Also for Kohler "K" models 6.25hp K141, 7hp K161.
|
|
|
14mm Spark Plug for Cushman with K241 10 hp and K301 12 hp Kohler engines... Also for Kohler, "K" models K321 and K341.
|
|
|
12 Volt Starter Solenoid for 1994 and newer Melex model 512G +++ Also Taylor Dunn and other carts +++ Will replace White-Rogers 6 terminal 586 series reversing solenoid on 1990s Cushman GT-1 and UTV MAX electric carts +++ Replacement solenoid for 1982 to 1989 Yamaha G1 2 cycle gas reversing solenoid +++ Can also be used to retrofit the obsolete relay number J10-81951-00-00 on the 1979 to 1981 G1.
|
|
|
Sediment Glass Bowl Fuel Filter with brass shut off valve for carts with Kohler or Briggs and Stratton engines and others +++ Also used on 1961 to 1964 Cushman model 735 "Shark Nosed" Golfster +++ Also 1963 Scotsman series 736 and 737 with 5, 6 or 8hp Briggs and Stratten +++ Also 1953 to 1961 Cushman series 780 Truckster and with Cushman Husky single cylinder L-head engine.
|
|
|
Standard Rod Bearing Set for Cushman with 9, 18 and 22 horsepower OMC engines.
|
|
|
Ignition Coil Resistor for Cushman Truckster, Haulsters, and others with 18 and 22 HP OMC engine.
|
|
|
Alternator Resistor for Cushman Truckster, Haulsters, and others with 18 and 22 HP OMC engine +++ 1.8 ohm
|
|
|
Rear Main Seal for Cushman with 9, 18 and 22 horsepower OMC engines.
|
|
|
Push Rod Tube O-ring for Cushman model 735, Truckster, Haulster and others with 18 and 22 HP gas engines +++ OEM quality
Retail: |
$2.89 |
On Sale: |
$2.35 |
You Save: |
19% |
|
|
|
Premium O.E.M. Quality Air Filter Element for 2001 and newer E-Z-GO gas 4 cycle ST480 Workhorse and Cushman Commander.
Retail: |
$59.48 |
On Sale: |
$27.39 |
You Save: |
54% |
|
|
|
Pre-Filter for Air Filter Element on 2001 and newer E-Z-GO gas 4 cycle ST480 Workhorse and Cushman Commander +++ Washable and reusable.
|
|
|
Air Filter Element for Cushman Minute Miser with 8hp Kohler engine model K181 +++ Also for Kohler models K161, K241, K301, K341 used on Cushman and other makes.
|
|
|
Plug Wire for Ignition Coil for 1953 to 1965 Cushman Truckster and Mailster with magneto ignition systems.
|
|
|
Standard Piston for 1956 to 1961Cushman Husky 7.95 HP cast iron engine +++ 3.0" bore.
|
|
|
Standard Piston for 1953 to 1956 Cushman Husky 7 HP cast iron engine +++ 2-7/8" bore.
|
|
|
Standard Piston Ring Set for Kohler models K141 / 6.25 HP... K161 / 7 HP and K181 / 8 HP engines used on 1960s Cushman golf carts... Also used on Walker and other early carts.
|
|
|
Standard Piston Ring Set for Kohler model K241, 10 HP used on Cushman and others.
|
|
|
Standard Piston Ring Set for Kohler model K301, 12 HP used on Cushman and others.
|
|
|
.030" Oversize Piston Ring Set for Kohler model K241, 10 HP used on Cushman and others.
|
|
|
.030" Oversize Piston Ring Set for Kohler model K301, 12 HP used on Cushman and others.
|
|
|
.020" Oversize Piston Ring Set for Kohler model K241, 10 HP used on Cushman and others
|
|
|
.020" Oversize Piston Ring Set for Kohler model K301, 12 HP used on Cushman and others.
|
|
|
.010" Oversize Piston Ring Set for Kohler model K241, 10 HP used on Cushman and others.
|
|
|
.010" Oversize Piston Ring Set for Kohler model K301, 12 HP used on Cushman and others.
|
|
|
Standard Piston Ring Set for Cushman model 735, also Trucksters and others with 18 or 22 HP gas engines. +++ Includes two compression rings and one three piece oil ring.
|
|
|
Standard Piston Ring Set for 1956 to 1961Cushman Husky 7.95 HP cast iron engine +++ 3.0" bore.
|
|
|
Standard Piston Ring Set for 1953 to 1956 Cushman Husky 7 HP cast iron engine +++ 2-7/8" bore.
|
|
|
.020 Over Piston Ring Set for Cushman model 735, also Truckster, Haulster and others with 18 or 22 HP gas engines +++ Includes two compression rings and one three piece oil ring.
|
|
|
.010 Oversize Piston Ring Set for Kohler models K141 / 6.25 HP +++ K161 / 7 HP and K181 / 8 HP engines used on 1960s Cushman golf carts +++ Also used on Walker and other early carts.
|
|
|
.030" Over Ring Set for Cushman model 735 and others with 18 HP gas engines +++ Also for 1962 to 1965 Truckster and Haulster with either 9hp M100 engine or 18hp M200 engine +++ Includes two compression rings and one three piece oil ring... OEM quality.
|
|
|
.020" Oversize Piston with Wrist Pin for Cushman model 735, also Trucksters Haulsters and others with 9 or 18 HP gas OMC engines.
|
|
|
Standard Piston and Ring Assembly for Kohler model K241, 10 HP used on Cushman and others +++ Includes piston, ring set, wrist pin, and wrist pin keepers.
|
|
|
Standard Piston and Ring Assembly for Kohler model K301, 12 HP used on Cushman and others +++ Includes piston, ring set, wrist pin, and wrist pin keepers.
|
|
|
.030" Oversize Piston and Ring Assembly for Kohler model K241, 10 HP used on Cushman and others +++ Includes piston, ring set, wrist pin, and wrist pin keepers.
|
|
|
.030" Oversize Piston and Ring Assembly for Kohler model K301, 12 HP used on Cushman and others +++ Includes piston, ring set, wrist pin, and wrist pin keepers.
|
|
|
.020" Oversize Piston and Ring Assembly for Kohler model K241 10 HP used on Cushman and others +++ Includes piston, ring set, wrist pin, and wrist pin keepers.
|
|
|
.020" Oversize Piston and Ring Assembly for Kohler model K301, 12 HP used on Cushman and others +++ Includes piston, ring set, wrist pin, and wrist pin keepers.
|
|