5/16" Steel Fuel Filter for Cushman, Yamaha and Taylor-Dunn +++ Fits most golf cars that use 5/16" I.D. fuel line hose.

Oil Pump Cover Square Style O-ring Gasket for Cushman model 735, Truckster, Haulster and others with 18 and 22 HP gas engines +++ OEM quality

Push Rod Tube O-ring for Cushman model 735, Truckster, Haulster and others with 18 and 22 HP gas engines +++ OEM quality

Oil Return Tube O-ring for Cushman model 735, Truckster, Haulster and others with 18 and 22 HP gas engines +++ OEM quality

Pressurized Oil Feed Tube O-ring for Cushman model 735, Truckster, Haulster and others with 18 and 22 HP gas engines +++ OEM quality

Pressurized Oil Feed Tube O-ring for Cushman model 735, Truckster, Haulster and others with 18 and 22 HP gas engines +++ OEM quality

Short Style Oil Pressure Switch for 1961 to 1992 Cushman Truckster and Haulster with either a 9, 18 or 22 horsepower engine.

Three Prong Oil Pressure Switch for 1979 to 1994 Cushman Truckster and Haulster with 18 hp or 22 hp OMC engine.

Straight Brass Fuel Fitting for carts with Kohler or Briggs and Stratton engines and others... Also used on 1961 to 1964 Cushman model 735 "Shark Nosed" Golfster... Also 1963 Scotsman series 736 and 737 with 5hp Briggs and Stratten... Also early Trucksters.

90 Degree Brass Fuel Fitting for carts with Kohler or Briggs and Stratton engines and others... Also used on 1961 to 1964 Cushman model 735 "Shark Nosed" Golfster... Also 1963 Scotsman series 736 and 737 with 5hp Briggs and Stratten... Also early Trucksters.

Engine Rebuild Kit for 5hp Briggs and Stratton models 130200-130900 used in 1965 to 1967 Cushman series 736 Scotsman model +++ Also listed as Sears model 809.656750.

12 Volt 3 Terminal Solenoid for 1961 to 1966 Cushman Truckters and Haulster with single cylinder OMC 9hp M-100 engine.

NO LONGER AVAILABLE +++ Muffler for 1953 to 1961 Cushman 780 series with single cylinder Husky engine.

Exhaust Flange for 1953 to 1961 Cushman 780 series with single cylinder Husky engine.

Stainless Steel Flex Exhaust Tubing for 1953 to 1961 Cushman 780 series with single cylinder Husky engine.

Exhaust Flange Gasket for 1953 to 1961 Cushman 780 series with single cylinder Husky engine.

Exhaust Tubing Clamps for 1953 to 1961 Cushman 780 series with single cylinder Husky engine.

5/16" Steel Bypass Fuel Filter for Cushman Truckster and Haulster with 18 hp or 22 hp OMC engines.

Air Filter Element for 1959 to 1965 Cushman Truckster and Haulster and others with 9 hp and 18 hp gas OMC engines. OEM quality.

Timing Belt for Cushman 27 horsepower Truckster and Haulster with 327 Diahatsu 3 cylinder engine before serial number OS53354 +++ NOTE: 103 teeth by 16mm (5/8") wide.

1-1/8" Muffler Clamp for Cushman 18 hp and 22 hp engines.

1-1/4" Muffler Clamp for Cushman 18 hp and 22 hp engines.

Ignition Coil for 1959 to 1965 Cushman Truckster with 7.95 hp Husky engine and 1959 TO 1965 Mailster +++ All with Wico 12 volt system.

Ignition Coil for 1961 to 1966 Cushman Truckters and Haulster with single cylinder OMC 9hp M-100 engine.

Ignition Points for 1953 to 1959 Cushman Truckster with 7 & 7.95 hp Husky engine and 1956 TO 1959 Mailster +++ All with Phelon system.

Ignition Coil for Kohler models K141, K161, K181, K241, K301 used on some Cushmans and others with Kohler engines.

Condenser for 1953 to 1959 Cushman Truckster with 7 & 7.95 hp Husky engine and 1956 TO 1959 Mailster +++ All with Phelon system.

Ignition Points Set for 1953 to 1959 Cushman Truckster with 7 & 7.95 hp Husky engine and 1956 TO 1959 Mailster +++ All with Wico 6 volt system.

Ignition Condenser for 1953 to 1959 Cushman Truckster with 7 & 7.95 hp Husky engine and 1956 TO 1959 Mailster, All with Wico 6volt system.

Air Filter Element for 1996 to 2008 Columbia Par Car +++ 1990 to 1994 Cushman Haulster and Turf Tuckster +++ Melex 512 and 625 +++ Also Toro and Jacobsen.

Ignition Points Set for 1959 to 1965 Cushman Truckster with 7.95 hp Husky engine and 1959 TO 1965 Mailster +++ All with Wico 12 volt system.

Square O-ring Style Valve Cover Gasket for Cushman model 735, Truckster, Haulster and others with 9 hp, 18 hp or 22 hp gas engines.

Condensor for 1959 to 1965 Cushman Truckster with 7.95 hp Husky engine and 1959 TO 1965 Mailster +++ All with Wico 12 volt system.

Plug Wire for Ignition Coil for 1953 to 1965 Cushman Truckster and Mailster with magneto ignition systems.

Standard Piston Ring Set for 1953 to 1956 Cushman Husky 7 HP cast iron engine +++ 2-7/8" bore.

Standard Piston for 1953 to 1956 Cushman Husky 7 HP cast iron engine +++ 2-7/8" bore.

Ignition Points Set for 1961 to 1966 Cushman Truckters and Haulster with single cylinder OMC 9hp M-100 engine.

Standard Piston Ring Set for 1956 to 1961Cushman Husky 7.95 HP cast iron engine +++ 3.0" bore.

Ignition Points Set for 1961 and newer Cushman with 18 and 22 HP engines.

CURRENTLY ON BACK ORDER +++ Standard Piston for 1956 to 1961 Cushman Husky 7.95 HP cast iron engine +++ 3.0" bore.

Ignition Condenser for 1961 to 1966 Cushman Trucksters and Haulsters with single cylinder 9hp engine +++ 1961 and newer Cushmans with 18 and 22 HP engines.

Air Filter Element for 4hp to 7hp Kohler engine models K90, K91, K141 and K161.

Replacement Waterproof Spark Plug Wire Boot replacement for Spark Plug on 1985 to 2009 Yamaha models G2, G5, G8, G9, G11, G14, G16, G19, G20, G21, G22, G23, G27 & G28 and 2007 and newer model YDRA "The Drive" +++ Also 1990 to 1995 Hyundai +++ Also for 1986 to 1997 Taylor-Dunn model R-680 truck +++ Also E-Z-GO, Club Car and many others.

Air Filter Element for 8hp to Kohler engine models K181 used on Walker Executive and others with this Kohler engine +++ Also carts with K161 engines

Carter Carburetor Repair Kit for Kohler engines used on Cushman models GC300 and GC400 +++ Also used on 1961 and newer model 735 and Truckster/Haulster with the OMC engine +++ Used on Walker Executive and many other makes using the Kohler engine +++ Used on Kohler 4 to 16 hp engines.

Air Filter Element for Cushman Minute Miser with 8hp Kohler engine model K181 +++ Also for Kohler models K161, K241, K301, K341

NONE AVAILABLE +++ Carter Carburetor Float Bowl Gasket for Kohler engines used on Cushman models GC300 and GC400 +++ Also used on 1961 and newer model 735 and Truckster/Haulster with the OMC engine +++ Used on Walker Executive and many other makes using the Kohler engine +++ Used on Kohler 4 to 16 hp engines.

Air Filter Element for Cushman Minute Miser with 8hp Kohler engine model K181 +++ Also for Kohler models K161, K241, K301, K341 used on Cushman and other makes.

CURRENTLY ON BACK ORDER +++ Standard Piston Ring Set for Cushman model 735, also Trucksters and others with 18 or 22 HP gas engines. +++ Includes two compression rings and one three piece oil ring.

Carter Carburetor Float Bowl for Kohler engines used on Cushman models GC300 and GC400 +++ Also used on 1961 and newer model 735 and Truckster/Haulster with the OMC engine +++ Used on Walker Executive and many other makes using the Kohler engine +++ Used on Kohler 4 to 16 hp engines.