1/2" Split Lock Washer used in many applications on E-Z-GO, Club Car, Cushman, Harley Davidson, Columbia Par Car, Nordskog, Taylor-Dunn and many other carts and applications.

1/4" Brass Washer for Speed Control Board on Cushman electric models 731, 732, Electric Deluxe models 881407, 881408, 881413 +++ Also Executive model 898322 and Titan models 898315 and 898316 and others +++ Used on foot switch on Gran Cushman Golfster models GC300 and GC400 +++ Used on Forward and Reverse Contact on many older Cushman golf carts such as Deluxe models 881407 and 881408.

1/4" Split Lock Washer used in many applications on E-Z-GO, Club Car, Cushman, Harley Davidson, Columbia Par Car, Nordskog, Taylor-Dunn and many other carts and applications.

1/4"-20 Brass Nut for Speed Control Board on Cushman electric models 731, 732, Electric Deluxe models 881407, 881408, 881413 +++ Also Executive model 898322 and Titan models 898315 and 898316 and others +++ Also used on foot switch on Gran Cushman Golfster models GC300 and GC400 +++ Also used on Forward and Reverse Contact on many older Cushman golf carts such as Deluxe models 881407, 881408 +++ Also Nordskog.

1/4"-20 x 1" Brass Screw for attaching Stationary Contact to Speed Control Board or Forward an Reverse Board on many Cushman electric models.

10mm Split Lock Washer also referred to as a Spring Washer used on Yamaha, Hyundai, Melex and many other carts and applications.

12 Volt 4 Terminal Solenoid for 1963 to 1986 Harley Davidson/Columbia Par Car +++ 1979 to 1994 E-Z-GO +++ 1964 to 1987 Cushman +++ 1994 to 1995 Melex +++ Nordskog, Noland, Davis, Jacobsen, and Otis.

12 volt, 4 Terminal Solenoid with silver contacts for 1985 and newer Yamaha models G2, G8, G9, G11, G14, G16 and G20 with 4 cycle gas +++ Also 90s Cushman GT-1E and UTV MAX electrics.

12 Volt 4 Terminal Original Equipment Curtis-Albright style Solenoid for 1990 to 2004 Cushman Titan electric.

12 Volt Heavy Duty 150 amp Solenoid with silver contacts for 1979 to 1994 E-Z-GO gas Pre-Medalist/TXT model X444 Marathon +++ Cushman electric models 731 and 732 and 1964 to 1967 Deluxe and Executive models +++ 1968 to 1975 Gran Cushman gas and electric models GC-300 and GC-400 +++ 1987 and earlier Minute Miser +++ All 1963 to 1981 Harley Davidson and 1982 to 1986 Columbia Par Car gas and electric models +++ 1994 to 1995 Melex model 512G +++ Nordskog, Taylor-Dunn, Karrior, Otis, Noland, Davis, and Jacobsen

NO LONGER AVAILABLE +++ Use SO66-050 +++ Genuine New Old Stock 12 volt, 6 Terminal Reversing Solenoid with silver contacts for 1982 to 1989 Yamaha G1 2 cycle gas +++ Will replace White-Rogers 6 terminal 586 series reversing solenoid on 1990s Cushman GT-1 and UTV MAX electric carts.

24 Volt Solenoid with 4 terminals for 1995 and newer Cushman Minute Miser.

24 Volt Reversing Solenoid with 6 terminals for 1994 and newer Cushman Minute Miser models 320 and 323 +++ 1987 to 1993 Taylor-Dunn model SS-534 and 1990 and newer Taylor-Dunn models E-451 and E-457 +++ Also Motrec and others.

3/8" Split Lock Washer used in many applications on E-Z-GO, Club Car, Cushman, Harley Davidson, Columbia Par Car, Nordskog, Taylor-Dunn and many other carts and applications.

36 to 48 Volt, 325 Amp Electronic Motor Speed Controller +++ Will replace Curtis model 1204, 275 Amp Controller on 1987 to 2008 Columbia Par Par +++ 1989 to 1994 E-Z-GO +++ 1990 to 1995 Club Car +++ 1990 to 1995 Hyundai +++ 1986 & newer Melex +++ Motrec with Curtis 1204 275 amp series controller on E-250, E-276, E-280, E-300 and E-330 +++ Cushman, Nordskog and Western .

36 Volt, 4 Terminal, Heavy Duty Replacement Solenoid for 1987 and newer Columbia Par Car +++ 1989 and newer E-Z-GO electric +++ 1988 and newer Club Car electric industrial vehicle +++ 1990 and newer Yamaha electric models G8, G9, G11, G14, G16 +++ 1986 and newer Melex with electronic speed control +++ Taylor-Dunn model B-150 and others +++ Also Jacobsen.

36 Volt, 4 Terminal, Heavy Duty Solenoid with silver contacts for 1987 and newer Columbia Par Car +++ 1989 and newer E-Z-GO electric +++ 1988 and newer Club Car electric industrial vehicles +++ 1990 and newer Yamaha electric models G8, G9, G11, G14, G16 +++ 1990 to 1994 Cushman GT-1 and GT America +9++ 2006 and newer Cushman Titan 36 volt model +++ 1986 and newer Melex with electronic speed control +++ Also Taylor-Dunn model B-150 & others +++ Also 1992 and newer Nordskog models 280 and 282 A, B, C and D +++ Also Jacobsen and Motrec.

36 to 48 Volt, 4 Terminal, Heavy Duty Replacement Solenoid for Melex model 625E +++ Has magnetic blowouts for arc suppression

36 Volt, 6 Terminal Reversing Solenoid for Taylor-Dunn model B-50 Shuttle Master +++ Cushman Tug model XI-340 and model 605248 +++ Replacement Solenoid for 1982 to 1989 Yamaha G1 Electric +++ Can also be used to retrofit the obsolete relay number J14-81951-00-00 on the 1980 to 1981 G1.

White-Rodgers 36 Volt, Heavy Duty 4 Terminal Short Housing Solenoid with Silver Contacts for Electric E-Z-GO, Cushman, Melex, Legend, Nordskog, Karrior, Otis, and Pargo... Also Westinghouse Marketeer electric models 436 and 437, HMK Marketeer models 438 and 439, Nordco Marketeer model 139 and 150... Also Shuttlecraft electric.

36 Volt 4 Terminal Solenoid with Silver Contacts for Cushman Tug model XI340... Also Minute Miser and Tug as well as other carts.

36 Volt 6 Terminal Reversing Solenoid for 1985 and newer Columbia Par Car +++ Reversing solenoid on Taylor-Dunn model B-150, MC-432 and others +++ Reversing solenoid on 1992 and newer E-Z-GO industrial vehicles and Cushman tug model 605238 and others +++ 36 volt reversing solenoid for Motrec.

NO LONGER AVAILABLE +++ You can replace with SP11-343 500 amp +++ 36 to 48 Volt, 400 Amp Curtis 1204M Electronic Motor Speed Controller Upgrade +++ Will replace Non Programmable Curtis 400 Amp controller on 1987 to 2008 Columbia Par Car +++ 1989 to 1994 E-Z-GO +++ 1990 to 1995 Club Car +++ 1986 & newer Melex.

48 Volt Solenoid with 6 terminals for Cushman Titan and Taylor-Dunn +++ Reversing solenoid on 1999 and newer Columbia Car Car +++ Reversing solenoid on Motrec (2 required) +++ Also 48 volt Legend.

48 Volt, 4 Terminal, Heavy Duty Solenoid for 1989 and newer E-Z-GO 48 volt electric +++ 1995 and newer Club Car 48 volt electric +++ 1996 to 2014 Yamaha 48 volt electric models G19, G22, G23, G27 and G29 YDRA "The Drive" +++ Also Motrec and Karrior.

5/16" Split Lock Washer used in many applications on E-Z-GO, Club Car, Cushman, Harley Davidson, Columbia Par Car, Nordskog, Taylor-Dunn and many other carts and applications.

5/16" USS Steel Flat washer used in many applications on E-Z-GO, Club Car, Harley Davidson, Columbia Par Car and many other carts and applications.

12 to 48 Volt, 500 Amp Programmable Electronic Motor Speed Controller Upgrade, bolt on replacement and upgrade for Curtis 400 Amp Controller on 1987 to 2008 Columbia Par Par +++ Also Curtis controller on 1989 to 1994 E-Z-GO +++ Upgrade on 1990 to 1995 Club Car and 1986 & newer Melex.

12 to 48 Volt, 600 Amp Programmable Electronic Motor Speed Controller Upgrade --- Bolt on replacement and upgrade for Curtis controller on 1987 to 2008 Columbia Par Par --- Also an upgrade for the 275 amp Curtis controller on 1989 to 1994 E-Z-GO --- Also 1990 to 1995 Club Car... Also 1986 & newer Melex and others.

7/16" Split Lock Washer used in many applications on E-Z-GO, Club Car, Cushman, Harley Davidson, Columbia Par Car, Nordskog, Taylor-Dunn and many other carts and applications.

NO LONGER AVAILABLE +++ Accelerator Pad Kit for 1994 and newer E-Z-GO Medalist and TXT models as well as industrial models +++ Also Cushman 280, 800, 2100, 2200 & 4800 Commanders.

NO LONGER AVAILABLE +++ Accelerator Pedal Assembly for 1994 to 2009 E-Z-GO Medalist, TXT, and Shuttle Series Golf Carts +++ The Clays Car, the Oasis Beverage Carts, the Jacobsen 1000 Haulster +++ The Workhorse 800, 1000, and 1200, the ST480, ST350 and ST Sport Utility Vehicles +++ The Cushman 280, 800, 2100, 2200 & 4800 Commanders.

Accelerator Pedal Return Spring for Cushman +++ Noland +++ Pargo +++ 3-7/8" Long.

Accelerator Compression Spring for 1994-1/2 E-Z-GO gas and electric model Medalist and TXT and many industrial carts +++ Also many Cushman industrial models including Titan, Commander and Bellhop.

Accelerator Pedal and Brake Return Spring for 1987 and newer Cushman Eagle models and Cushman Hawk models 797008, 797010, 797011, 797012, 797013, 797024 +++ Accelerator Pedal Spring on 1961 to 1963 Truckster series 780 and later Truckster models 898543, 898546 and 898546C +++ Brake Pedal Return Spring on 1990 to 1994 Tug models 898340 and 898340A +++ Many other Cushman carts and applications +++ 3-1/8" long.

Accelerator Pedal and Brake Return Spring for 1954 to 1959 Cushman model 731-6 & later.

Blank Speed or Resistor Board for Westinghouse Marketeer, Nordskog and many others.

Steel Contact Bolt for for attaching stationary contact to Speed Control Board on many Cushman electric models.

Brass Stud to mount Movable Contact part number SP33-030 to Movable Contact Board number SP33-050 for Cushman +++ Also used on Titan 36 and 48 volt resistor board SP33-260 for mounting resistors.

Wiper Contact Brush Holder for Wiper Contact on Foot Speed Control Switch on 1990 and newer Cushman 36 and 48 volt carts with resistor speed control for models Minute Miser, Executive, Titan, Tug, Eagle, and Courtesy Carriage industrial carts.

After Market 120 Amp Resetable Circuit Breaker. +++ Will replace 120 amp circuit breakers on Cushman and Harley golf carts.

120 Amp Circuit Breaker for Cushman.

150 Amp Circuit Breaker for Cushman Stock Chaser and Bell Hop models +++ Also Motrec.

Clevis Yoke for Accelerator Rod on 1983 and newer E-Z-GO +++ Also Brake Clevis on many Taylor-Dunn models +++ Also for many Cushman models.

Curtis 36 to 48 Volt, 500 Amp Programmable Electronic Motor Speed Controller with four buss bars with Plug Braking(has A2 terminal), will replace Curtis model 1204, 275 Amp Controller on 1987 and newer Columbia Par Par +++ 1989 to 1994 E-Z-GO +++ 1990 to 1995 Club Car +++ 1986 & newer Melex +++ Taylor-Dunn +++ 1990 to 1995 Cushman Titan model as well as GT-1, Eagle, GT America, UTV Max, F2J, and Bellhop models.

12 to 48 Volt, 400 Amp Programmable Replacement Electronic Motor Speed Controller for 1995 and newer E-Z-GO industrial models 950 Series Shuttle, XI-875/881 Burden Carrier and Workhorse/MPT (Multi-Purpose Truck)1000 with series wound motors.

NONE AVAILABLE +++ You can use SP11-347 +++ E-Z-GO Factory O.E.M. Curtis 1206 Motor Speed Controller for 1994-1/2 and newer E-Z-GO Medalist and TXT models with ITS (Inductive Throttle System) +++ Also 1998 to 2002 Workhorse 800 and 2004 to 2012 MPT 800 +++ Output: 350 amps at 36 volts.

Diode for speed control on 1967 to 1983 Harley Davidson and for 1990 to 1999 Columbia Par Car. +++ 1990 and newer E-Z-GO +++ Also Cushman, Melex, Hyundai and others using Curtis electronic motor speed controller +++ Used across solenoids on Marketeer and Nordskog +++ Used across solenoids on Pargo model 544 with eight solenoids.

First Speed Resistor for Foot Speed Control Switch on Cushman 36 Volt electric Minute Miser industrial carts and 1953 to 1970 model 24 Volt model 730-20

First Speed Resistor for Foot Speed Control Switch on 1976 to 1991 Cushman 36 and 48 volt electric Titan industrial carts +++ 1980 to 1982 Police Haulster +++ 1990 to 1991 Eagle and 1991 and earlier 36 volt Tug.