CURRENTLY ON BACK ORDER +++ Chrome Center Cap Set with Chrome Lug Nuts for Club Car and others with 2.650" diameter center hole +++ NOTE: Can be used with many stock rims on most Harleys and E-Z-GOs and others that use 1/2"-20 lug nuts.

NONE AVAILABLE +++ Driven Clutch Bushing for 1976 to 1988 E-Z-GO +++ Direct replacement +++ Fits part number CL22-100.

NO LONGER AVAILABLE +++ Inner Right Passenger Side Battery Rack for 1978 to mid 1994 E-Z-GO electric X444 Marathon model +++ Also works on Melex models 112, 212, 152, 252, 412 and 512 electrics.

Blower Housing Bolt for 1989 to 1993 with model EC25-3PG, 244cc, two cycle engine +++ Other carts and applications requiring an 8mm bolt.

Clevis Yoke for Accelerator Rod on 1983 and newer E-Z-GO +++ Also Brake Clevis on many Taylor-Dunn models +++ Also for many Cushman models.

Chrome 1/2"-20 tpi Lug Nut Set of 16 for four wheels.

Locking Chrome Lug Nut Set of four with key +++ Has 1/2"-20 threads per inch

Accelerator Ball Joint and Stud for 1976 to 1994 E-Z-GO Pre Medalist Marathon X440 and X444 models.

Brake Pedal Return Spring for 1994 and newer E-Z-GO Medalist and TXT models.

Brake Spring Kit for 1997 and newer E-Z-GO +++ 1992 and newer Club Car +++ 1991 to 2008 Yamaha G9-G28 +++ 1987 to 2017 Columbia Par Car +++ Melex models 512 and 625 +++ 1993 and newer Cushman Minute Miser. +++ Motrec E-250, E-300 and others +++ Taylor-Dunn with 160mm brakes +++ Also 1999 Taylor-Dunn model ER-200 Rover +++ Others with Bendix self adjusting brakes.

Hill Brake Spring for 1965 and newer E-Z-GO +++ Also Melex and Legend.

Governor Swivel Kit for 1981 to 1988 E-Z-GO with 2 cycle engine +++ Includes swivel, set screw, E-clip, and washer.

Accelerator and Choke Cable Clamp Kit for 1976 to 1994 E-Z-GO Pre Medalist Marathon X440 and X444 models +++ Also useful in other applications.

Rear Axle Key for 1977 to 1981 E-Z-GO +++ Also 1978 to 1981 Harley Davidson.

Shock Absorber Bushing Kit for all years E-Z-GO, Club Car, Melex, Cushman, Westinghouse, Taylor-Dunn +++ Also many others.

Brake and Accelerator Pedal Return Spring for 1965 to 1977 E-Z-GO Electric Marathon model +++ Also 1986-1/2 to 1993 E-Z-GO industrial models XI-775, 875, 881, PCX-952, 954, 955, 956, 957 and BCX-960... Also Brake Pedal Return Spring on 1971 and newer Melex... Also Legend.

Accelerator Return Spring for 1971 to 1976 E-Z-GO Gas and 1978 to 1980 E-Z-GO Electric Marathon models... Also Jacobsen.

Shock Reducer Bushing for ST300 Shock absorber used on many Cushman vehicles +++ Used on rear shocks on E-Z-GO and Pargo 900 series +++ Upper sleeve on 1975 to 1985 Taylor-Dunn Tee Bird models GT-370 and GT-371 +++ 5/8" O.D. down to 7/16" I.D.

Accelerator Compression Spring for 1994-1/2 E-Z-GO gas and electric model Medalist and TXT and many industrial carts +++ Also many Cushman industrial models including Titan, Commander and Bellhop.

Accelerator Compression Spring for 1989 to 2008 E-Z-GO gas Marathon, Medalist and TXT models and Industrial models.

Accelerator Compression Return Spring for 2002 to 2008 E-Z-GO gas ST350 and ST Sport +++ 2006 to 2009 gas MPT 800 and Sport II +++ 2003 gas Clays Car and Sport 2 + 2.

Shock Reducer Bushing for ST300 Shock absorber +++ For use when using this shock on rear of 1971 to 1994 E-Z-GO gas carts +++ 5/8" O.D. down to 3/8" I.D.

Right Hand Red Brake Shoe Return Spring for 1974-1982 E-Z-GO Gas and Electric & 1989-1990 gas GXT-1500 & GXI-1500 and 1996 & newer models models 875, 881 and 950 +++ Cushman Titan +++ 1990s Nordskog/US Electricar Legend models 280A and 282A +++ Pargo/Eagle industrial vehicles +++ Taylor-Dunn model B-150 electric and G-150 gas and 1999 and newer R-380 model +++ 1993 and newer Columbia Par Car BC2, BC3 and BC4 Burden Carrier, Summit, EU24 and other utility vehicles with Green or Blue Spring +++ Karrior 2400 XP burden carrier +++ EVI 720 and 820 +++ Davis, Cushman, Toro, Motrec, and Jacobsen with old style Bendix Brakes +++ Legend EV3-01 and EV4-01.

Brake Pedal Return Spring for 1989 to 1994 E-Z-GO.

Left and Right Hand Green and Red Brake Shoe Return Spring for 1974-1982 E-Z-GO Gas and Electric & 1989-1990 gas GXT-1500 & GXI-1500 +++ 1996 & newer models models 875, 881 and 950 +++ Cushman Titan +++ 1990s Nordskog/US Electricar Legend models 280A and 282A +++ EVI models 720 and 820, Pargo/Eagle industrial vehicles +++ Taylor Dunn model B-150 electric and G-150 gas and 1999 and newer R-380 model +++ 1993 and newer Columbia Par Car BC2, BC3 and BC4 Burden Carrier, Summit, EU24 and other utility vehicles +++ Karrior: 2400 XP burden carrier +++ Davis, Cushman, Toro, Motrec, Polaris and Jacobsen with old style Bendix Brakes +++ Legend EV3-01 and EV4-01.

Slotted Castle Rear Axle Nut for 1991 and newer E-Z-GO with 4 cycle engine +++ 1996 and newer E-Z-GO Gas and Electric 4 and 6 Passenger Shuttle, ST Express, 875, 881, 950 +++ Cushman Truckster, Haulster and Titan Vehicles +++ Front Spindle Castle Nut for 1974 to 2003 Club Car gas and electric models +++ Front Spindle Nut for Taylor-Dunn model 248 and others +++ Front Axle nut on Marketeer "Lynx" model 427 golf cart +++ Motrec Front Spindle and Kingpin Nut on many models +++ Also for Shuttlecraft.

Brake Caliper Bolt with hole for cotter pin for 1972 to 1981 Harley Davidson gas and electric with disc brake on motor +++ 1971 to 1973 E-Z-GO with disc brake on motor +++ Measures 3-1/2" long.

Air Cleaner Mounting Stud for 1971 to early 1972 Harley model D and DC and 1982 to 1983 models D3 and DX-4 +++ 1976 to 1994 E-Z-GO pre-Medalist with 2 cycle engine +++ Measures 9-1/8" long with 1/4-20 tpi.

Spindle Washer for 1994 and newer E-Z-GO Medalist and TXT +++ Also Pivot Arm Washer for E-Z-GO three wheel front fork.

NO LONGER AVAILABLE +++ Steering Tube Bushing for 1979 to 2002 E-Z-GO, also Jacobsen and Legend.

7/8"-14 Thin Nylock Flywheel Nut for 1982 to 1995 Columbia Par Car with 2 stroke engine... Many other applicatons

Rubber Bushing for Shock Absorber and Engine Stabilizer 1967 to 1997 Harley Davidson and Columbia Par Car +++ Upper shock bushing on 1971 to 1994 E-Z-GO Marathon 2 cycle gas and 1991 to 1994, 4 cycle gas +++ Lower shock mount busing on Melex 3 wheel model 102.

2" Hose Clamp for air hose on many carts.

Bronze Front Spindle Thrust Washer for 1981 to early 2001 E-Z-GO four wheel +++ Also 1981 to early 2001 Jacobsen four wheel carts.

Black Polyurethane Leaf Spring Bushing for both front and rear on 1970 to 1980 Club Car Caroche model +++ 1981 and newer gas and electric Club Car models DS, Carryall and Precedent +++ Lower Outboard A-Plate Bushing for 1984 to 1985 and 1992 ONLY Club Car DS +++ 2008 and newer E-Z-GO RXV model bushing at rear of rear leaf spring.

Lug Bolt for Rear Axle or Front Wheel Hub for E-Z-GO +++ 1982 to 2008 Columbia Par Car +++ Also other makes with .530 to .535 hole for serrations and 1/2 by 20 threads.

Woodruff Key for Starter/Generator Pulley on late 1969 to 1995 Harley Davidson and Columbia Par Car 2 cycle gas models with either Bosch or Hitachi starter/generators +++ 1984 to 1996-1/2 Club Car generator pulley +++ 1990 to 1995 Hynudai starter/generator pulley +++ Melex and E-Z-GO with Hitachi starter/generator +++ Also Cushman brake cam.

Ball Joint Socket for Accelerator Linkage for 1989 and newer E-Z-GO electric and also gas with 4 cycle engine +++ Also used on Taylor-Dunn.

Stainless Steel Body Support Reinforcement Screw used on 967 to 1981 Harley Davidson gas and electric models +++ Many other applications +++ 1/4-20 x 7/8"

Stainless Steel Replacement Fillister Head OEM Style Crankcase Screw on 1963 to 1981 Harley Davidson models D, DF, DC and DF +++ Also Air Shroud Mounting Screw on 1963 to 1966 Harley Davidson models D and DF and 1963 to 1968 model DC +++ Many other applications.

Fillister Head OEM Crankcase Screw on 1963 to 1981 Harley Davidson models D, DF, DC and DF +++ Many other applications +++ Measures 1/4-20 x 2-1/4".

Input Gear Retaining Snap Ring for 1986-1/2 and newer E-Z-GO electric +++ 1993 to 2013 Columbia Par Car electric +++ 1990 to 1995 Hyundai +++ 1990 to 2008 Yamaha electric models G8-G27 +++ 2005 & newer Cushman Titan, 875 and Personnel Carriers +++ 1986 & newer Melex electric models 412E, 512E & 625E +++ 1998 and newer Taylor-Dunn model R-380 +++ 1992 and newer Nordskog model 280A.+++ Motrec 330-E and other models +++ All with Dana electric differential +++ Rear Axle Bearing Retainer for 1970 to 1980 Club Car Caroche, Pargo golf carts, early E-Z-GO golf carts and mid 1980s burden carriers, All with Terrill differentials.

Chrome Bag Hook Nut for 1965 to 1981 gas and electric Harley Davidson and 1982 to 1987 Columbia Par Car gas and electric models +++ Many other applications.

Inner Rear Brake Drum Washer for 1994 and newer gas powered E-Z-GO models.

5/16" Type B Flat Washer for Battery Hold Down Rod on 1981 to 2006 Club Car electric model DS +++ Also can be used with many other battery hold rods and other applications.

1/4-20 x 1-1/4" Pan Head Screw used on 1976 to 1978 Harley Davidson model DE40 on top support +++ Many other applications.

Thick Rear Axle Washer for 1977 and newer E-Z-GO +++ Also 1978 to 1989 Harley Davidson and Columbia Par Car rear brake drum or hub washer +++ Also Front Axle Washer for 1963 and newer Harley Davidson 3 wheel gas and electric models +++ Also Harley transmission output adapter +++ Also Cushman rear axle hub.

Copper Stud for Speed Control Board for 1971 to 1993 E-Z-GO Electric +++ Also old style Melex models 102, 202, 112, 212, 152 and 252 with resistor control +++ Also Legend with resistor control.

Conical Brake Pedal Spring for 1993 to 2004 E-Z-GO.

14mm by 1.5 tpi Nut for Starter/Generator on 1969 to 1981 Harley Davidson and 1982 and newer Columbia Par Car +++Also fits all Bosch, Hitachi, Reliance and others used on E-Z-GO, Club Car, Hyundai, Melex and Yamaha.