Hardware

1"-14 Thin Castle Nut for 1981 and newer E-Z-GO front spindle.

5/16"-18 Nylock Nut for Front and Rear Bumper on 1984 to 1992 Club Car model DS +++ Use with mounting bolt number BD44-271 and BD44-362. Two each required +++ Also for Brake Linkage on Nordskog and many other carts +++ Can be used on battery hold down rods.

Hairpin Style Clip for Accelerator Cable Clevis Pin for 1979 to 2009 Yamaha gas models G1, G2, G3, G5, G8, G9, G11, G14, G16, G19, G20, G21, G22, G23, G27, G28 +++ Also 2007 and newer Yamaha model YDR, "The Drive" +++ Also 1986 to 1997 Taylor-Dunn model R-680 truck +++ Many other applications.

Lever Return Spring for PB-5 and PB-6 Style Potentiometer (Pot Box)

Brake Band Return Spring for 1978 and older E-Z-GO and Melex.

Replacement Accelerator Ball Joint and Stud for 1976 to 1994 E-Z-GO Pre Medalist Marathon X440 and X444 models.

Replacement Governor Rod Assembly for 1979 to 1986 Yamaha G1 and 1986 Yamaha G3 +++ Also Replacement Oil Injection Rod on E-Z-GO with 2 cycle engine with oil injection.

1/4"-20 standard course thread Nut for many applications on 1963 and newer Harley Davidson. +++ Also Club Car, Cushman, E-Z-GO, Legend, Pargo, Jacobsen, Taylor-Dunn and others.

Spindle Pin Bolt for 2001 to 2018 E-Z-GO gas and electric models TXT, Medalist, 4 and 6 Passenger Shuttle, ST Express and Workhorse 800, 1000 and 1200 Models. and others.

Spindle King Pin Bolt for 1996 and newer gas and electric models ST350 and 1200 workhorse.

3/8"-24 thread Inverted Flare Plug for blocking off unused ports on master cylinder banjo fittings and other brake line fittings on Club Car, E-Z-GO, Cushman, Taylor-Dunn and others.

Front Axle Bearing Adjusting Nut for 1953 to 1967 Cushman 3 wheel series 730, 731, 732, 733 Golfster and Miute Miser. +++ 1965 to 1984 Cushman 3 wheel Haulster and Truckster without front brake with 18 hp engine and some with 9 hp engine.

Large Black Head Aluminum Pop Rivet for securing Cowl to Instrument Panel on 1994-1/2 and newer E-Z-GO +++ Can be used on other carts and applications.

Bag Strap Aluminum Rivet for 1965 to 1994 Pre-Medalist/TXT E-Z-GO +++ Can be used on other carts and applications.

Rear Spring U-Bolt for 1996 and newer E-Z-GO gas and electric Medalist and TXT, 4&6-Passenger Shuttle, ST Express, ST 350, ST Sport, and Workhorse 800 and 1200 Models.

Rear Leaf Spring Bushing used on large front eye of rear spring on 2008 and newer Electric Powered E-Z-GO RXV model and 2010 and newer 2Five vehicles.

1/2"-20 Thin Nylock KingPpin Nut for late 1977 Harley Davidson model DE-40 after serial number 8D10057H7 +++ Also 1979 to 1982 model MGIV (Master Glide IV) +++ Also Nut for upper tie rod (ball joint) on 2014 Summit SP5, SU5, SU5-2

1"-14 Front Spindle Castle Nut for 2000 and newer Columbia Par Car Burden Carrier Payloader models BC2, BC3 and B4 +++ Front Spindle Castle Nut for 1978 to 1982 Nordskog model 262 and 264 Cargo Carrier and 1983 and newer Nordskog and US Electricar Legend models 280 and 282 series A,B,C and D +++ Also Front Spindle Nut for all 1965 to present E-Z-GO four wheel models..

3/16" x 1/2" x 5/8" Aluminum Large Head Blind Drive Rivet for attaching pedal pads on 1965 and newer E-Z-GO +++ Also Melex, Jacobsen, and Legend.

5/16"-24 SAE Fine Thread Nut for many applications on 1963 and newer Harley Davidson, Cushman, E-Z-GO, Taylor-Dunn and others.

Accelerator Rod & Brake Compensator Bushing for 1984 and newer E-Z-GO.

Rear Spring U-Bolt for 2008 E-Z-GO gas and electric RXV model +++ Has M10-1.5mm threads

1/2"-20 Castle Nut for Tie Rod End for 1969 to 1971 Taylor-Dunn models B, BN and M+++ 1972 to 1975 Taylor-Dunn Tee Bird models GT-360 and GT-361 +++1975 to 1985 Tee Bird models GT-370 and GT-371 +++ 1984 and newer Taylor-Dunn models B-248 and B-254 +++ 1989 and newer models B-660, B-661 and B-661E +++ Model R-380 electric and 1998 and newer gas model R-680 +++ Many other applications.

Brake Pedal Bushing for 1965 to 1993 Marathon models X440 and X444 +++ 1994 to 2018 E-Z-GO Medalist, TXT, RXV, MPT, Workhorse, Freedom, Express and Terrain models.

3/8"-16 Locking Whiz Type Flange Nut used on Brake Pedal Pivot Bolt on 1975 to 1994 E-Z-GO pre-Medalist models +++ Used on Shoulder Bolt on front of Rear Leaf Spring for all 1994 and newer E-Z-GO models +++ Many other carts and applications.

3/8"-16 Standard Course Thread Nut for many applications on 1963 and newer Harley Davidson +++ Also Club Car, Cushman, E-Z-GO, Legend, Pargo, Jacobsen, Taylor-Dunn and others.

Torsion Style Hill Brake Pedal Return Spring for 2001 and newer E-Z-GO

1/4" Brass Washer for Speed Control Board on Cushman electric models 731, 732, Electric Deluxe models 881407, 881408, 881413 +++ Also Executive model 898322 and Titan models 898315 and 898316 and others +++ Used on foot switch on Gran Cushman Golfster models GC300 and GC400 +++ Used on Forward and Reverse Contact on many older Cushman golf carts such as Deluxe models 881407 and 881408.

5/16"-24 Nylock Nut used in various places on E-Z-GO, Legend, Harley Davidson and Columbia Par Car, Taylor-Dunn and many more.

Brass Brake Line T-fitting +++ Connects three 3/16" steel brake lines with 3/8"-24 threads to 3/8"-24 Inverted Flare female T-fitting +++ Used on Cushman +++ Taylor-Dunn +++ Columbia Par Car +++ And many others.

Aluminum Small Head Blind Drive Rivet for attaching pedal pads on 1965 and newer E-Z-GO +++ Also Jacobsen, and Legend.

Black Aluminum Pop Rivet used to secure fender caps, bag strap buckles and other trim on all years of E-Z-GO +++ Can be used on other carts and applications.

5/32" x 7/16" x .450" Black Aluminum Pop Rivet used on 1994-1/2 to 2018 gas and 36/48 volt electric E-Z-GO Medalist and TXT models on Cowl and elsewhere +++ Can be used on other carts and applications.

3/16" x 5/8" x 3/8" Black Aluminum Pop Rivet used to secure fender caps and other trim on all years of E-Z-GO +++ Can be used on other carts and applications.

7/16"-20 Thin Flex Lock Nut for Steering Pivot Pin on Taylor-Dunn model ET-150 and others.

Complete Body Rivet Kit for 1994-1/2 and newer E-Z-GO TXT model.

3/16" x 9/16" x 5/8" Aluminum Rivet for 1994-1/2 and newer E-Z-GO gas and 36volt and 48 volt electric TXT, Medalist, RXV, ST Vehicles, Shuttles, Cushman, Express, Terrain, Woods MAV 350, MAV 480 +++ Can be used on other carts and applications.

3/16" x 5/16" x 5/8" Black Aluminum Rivet for 1996 and newer E-Z-GO gas and 36 volt and 48 volt electric TXT for attaching rear bumper +++ Can be used on other carts and applications.

3/16" x 5/8" x 3/8" Small Flange Aluminum Pop Rivet used to secure fender caps and other trim on all years of E-Z-GO +++ Can be used on other carts and applications.

3/16" x .70" x 5/8" Stainless Steel Pop Rivet for attaching Seat Hinge on 2001 and newer E-Z-GO models RXV, TXT, Cushman, Express, E-Z-GO Shuttle, Medalist, Terrain. +++ Can be used on other carts and applications.

5/32" x 9/16" x .470" Aluminum Pop Rivet used on 1994-1/2 to 2007 E-Z-GO Medalist, TXT, M5 & other models for attaching mat and elsewhere +++ Can be used on other carts and applications.

1/4"-20 Nylock Nut for many applications on Club Car, E-Z-GO, Harley Davidson, Columbia Par Car, Legend, Nordskog and many other carts +++ Can be used on battery hold down rods.

J Type Battery Hold Down Rod for 1998 to 2004 E-Z-GO electric industrial models 875 and 881 +++ 1999 to 2004 electric Shuttle model 950.

Stainless Steel Brake Pedal Pivot Bolt for 2000 and newer E-Z-GO models TXT, ST Sport, St 350 Sport and industrial models MPT 800, MPT Sport, 1000, MPT1000 and Cushman Commander 2100 and Jacobsen Hauler 1000 +++ Also 1996 to 2012 E-Z-GO gas Refresher +++ Also gas Clays Car 2 + 2.

Brake Pedal Return Spring for 1981 to 1985 Pargo model 873 industrial flat bed and 1986 E-Z-GO industrial model 775.

5/16" USS Steel Flat washer used in many applications on E-Z-GO, Club Car, Harley Davidson, Columbia Par Car and many other carts and applications.

CURRENTLY ON BACK OREDER +++ Ball Stud for Forward and Reverse Shift Cable Assembly on 2008 and newer E-Z-GO RXV model +++ 2010 and newer TXT with Kawasaki engine +++ Many others.

1/2"-20 SAE Fine Thread Nut for rear shock bolt on 1966 to 1981 Harley Davidson and 1982 to 1988 Columbia Par Car +++ Many other applications on 1963 and newer Harley Davidson as well as Cushman, E-Z-GO, Taylor-Dunn and others.

Brass Brake Line T-fitting +++ Connects two 3/16" steel brake lines with 3/8"-24 threads to 1/8" female pipe thread for attaching stop light switch +++ Used on Cushman +++ Nordskog, Taylor-Dunn, Columbia Par Car +++ And many others.

Brass Brake Line T-fitting with Mounting Bracket +++ Connects three 3/16" steel brake lines with 3/8"-24 threaded male ends +++ Used on Cushman +++ E-Z-GO +++ Nordskog +++ And many others.