Whiz Lock Style Resistor Bolt for 1965 to 1985 E-Z-GO +++ 1976 to 1978 Harley model DE-40 +++ 1971 to 1985 Melex +++ 1973 to 1976 Pargo model 544 with eight solenoids +++ Also Cushman.

1/4-20 x 3/4" Bolt for Taylor-Dunn Five Speed J Hook with 2 holes +++ Also for mounting Dual Cup Holder on 1993 and newer Club Car model DS +++ Also for mounting J Hook on mid 1970s Eagle golf cart made in Long Beach California by Lad Industries +++ Also for mounting solenoid on 1963 to 1993 pre-Medalist Speed Board +++ Also Speed Control on Harley Davidson DE-40.

White-Rodgers 36 Volt, Heavy Duty 4 Terminal Short Housing Solenoid with Silver Contacts for Electric E-Z-GO, Cushman, Melex, Legend, Nordskog, Karrior, Otis, and Pargo... Also Westinghouse Marketeer electric models 436 and 437, HMK Marketeer models 438 and 439, Nordco Marketeer model 139 and 150... Also Shuttlecraft electric.

Screw for Micro Switch, for all years of E-Z-GO gas or electric, also Cushman, Taylor-Dunn, Jacobsen, Legend, Melex, and Noland.

Ball Stud for Accelerator Linkage on 1976 to 1994 E-Z-GO Pre Medalist Marathon X440 and X444 models.

Replacement Motor Speed Controller for 1995 to 1999 E-Z-GO with DCS (Drive Control System) with 9 pin connector, Output: 400 amps at 24 to 48 volts.

Plastic Large Head for 1965 to 1994 E-Z-GO Pre Medalist Marathon model +++ Also Yamaha, Melex, Jacobsen, and Legend and others.

Lever Return Spring for PB-5 and PB-6 Style Potentiometer (Pot Box)

48 Volt, 4 Terminal, Heavy Duty Solenoid for 1989 and newer E-Z-GO 48 volt electric +++ 1995 and newer Club Car 48 volt electric +++ 1996 to 2014 Yamaha 48 volt electric models G19, G22, G23, G27 and G29 YDRA "The Drive" +++ Also Motrec and Karrior.

3/4"-16 Thin Jam Nut for Front Axle 1965 to 1993 E-Z-GO three wheel +++ Jam Nut on 1953 to 1967 Cushman 3 wheel +++ 1965 to 1984 Cushman 3 wheel Haulster and Truckster +++ Motrec steering wheel nut +++ Pargo and Legend three wheel front axle nut +++ Marketeer 3 wheel front axle jam nut +++ Motor Jam Nut for 15 tooth motor sprocket on Taylor-Dunn +++ Speed Control Bushing Nut on Harley Davidson, E-Z-GO, Legend, Jacobsen and Melex +++ Steering Box Jam Nut on Ross Steering Box on 1979 to 1983 Club Car.

Whiz Lock Style Nut for 1965 to 1985 E-Z-GO +++ 1976 to 1978 Harley model DE-40 +++ 1971 to 1985 Melex +++ 1973 to 1976 Pargo model 544 with eight solenoids +++ Also Cushman +++ Many other applications.

Sealed Plunger Style Accelerator Micro Switch with two terminals for 1982 to 1984 E-Z-GO gas Marathon models used as a start/stop switch that is mounted under the floor and activated by throttle linkage.

Throttle Linkage Adjusting Rod Assembly for 1989 to 1993 E-Z-GO Marathon with 3 PG two cycle engine.

Governor Linkage Adjusting Rod Assembly for 1989 to 1993 E-Z-GO Marathon with 3 PG two cycle engine.

48 Volt Solenoid for 2014 and newer Yamaha electric model YDR "The Drive" +++ 2010 and newer E-Z-GO TXT model with Curtis brand controller.

Inductive Throttle Sensor for 1994-1/2 and newer E-Z-GO with DCS or PDS systems.

Replacement Accelerator Ball Joint and Stud for 1976 to 1994 E-Z-GO Pre Medalist Marathon X440 and X444 models.

Curtis 36 to 48 Volt, 500 Amp Motor Speed Controller upgrade for 1994-1/2 and newer E-Z-GO with series wound motor and ITS (Inductive throttle system) throttle pot.

All new Alltrax SR Series 12 to 48 Volt, 400 Amp Electronic Motor Speed Controller Upgrade +++ Will replace Curtis 275 Amp controller on 1987 to 2008 Columbia Par Car +++ 1989 to 1994 E-Z-GO +++ 1990 to 1995 Club Car +++ 1986 & newer Melex +++ Also Hyundai with Curtis controller.

NONE AVAILABLE +++ Upgrade Programmable Curtis 500 Amp High Torque 36 to 48 volt Controller, Replaces Curtis 1206 Motor Speed Controller on 2000 and newer E-Z-GO with PDS (Positive Drive System) or DCS (Drive Control System).

NO LONGER AVAILABLE +++ Speed Control Board Assembly complete with wiper brush and brush holder arm for 1965 to 1982 E-Z-GO Marathon models with resistors +++ Also industrial models.

3/16" x 1/2" x 5/8" Aluminum Large Head Blind Drive Rivet for attaching pedal pads on 1965 and newer E-Z-GO +++ Also Melex, Jacobsen, and Legend.

NOW AVAILABLE +++ Resistor Coil Assembly for 1985 to 1994 E-Z-GO Marathon electric, includes aluminum housing and 1st, 2nd and 3rd speed resistor assembly.

Accelerator Pedal Switch for 2008 and newer E-Z-GO model RXV.

Accelerator Rod & Brake Compensator Bushing for 1984 and newer E-Z-GO.

NO LONGER AVAILABLE +++ Accelerator Rod Assembly for 1984 to 1994-1/2 E-Z-GO electric Pre Medalist Marathon X440 and X444 models.

NO LONGER AVAILABLE +++ Use SP22-170 +++ Original N.O.S.(new old stock) Speed Control Switch with 5 terminals for pre-1970 E-Z-GO Electric with multiple solenoids and 1986-1/2 to 1993 E-Z-GO Industrial models XI-775, 875, 881, PCX-952, 954, 955, 956, 957 and BCX-960 --- Also Pargo golf cart models and Pargo Pargo/Eagle industrial vehicles with multiple solenoids and two resistor system and Pargo/Eagle industrial model 873, Empire and other industrial models. ... Also Cushman, Davis and Noland.

Aluminum Small Head Blind Drive Rivet for attaching pedal pads on 1965 and newer E-Z-GO +++ Also Jacobsen, and Legend.

Solenoid for 2009 to 2014 E-Z-GO 48 Volt RXV model with Danaher brand controller +++ 2010 and newer model 2Five.

Solenoid Replacement Kit for 2008 E-Z-GO 48 Volt RXV model with Danaher brand controller +++ Replaces White-Rogers series 120 tower style solenoid +++ Includes waterproof butt connectors.

Curtis 1268, 400 Amp 36 to 48 volt SepEx Controller, +++ Replaces Curtis 1206 Motor Speed Controller on 2000 to 2009 E-Z-GO with PDS (Positive Drive System) or DCS (Drive Control System).

Copper Stud for Speed Control Board for 1971 to 1993 E-Z-GO Electric +++ Also old style Melex models 102, 202, 112, 212, 152 and 252 with resistor control +++ Also Legend with resistor control.

Resistor Lead for 1976 to 1982 Harley Davidson Model DE-40 and MG-IV +++ 970 to 1985 E-Z-GO +++ 1968 to 1985 Melex +++ Also Pargo.

Ball Joint Socket for Accelerator Linkage for 1989 and newer E-Z-GO electric and also gas with 4 cycle engine +++ Also used on Taylor-Dunn.

Bronze Throttle Rod Bearing for 1996 to 1998 E-Z-GO gas Workhorse 1500 and other gas E-Z-GO industrial vehicles.

Diode for speed control on 1967 to 1983 Harley Davidson and for 1990 to 1999 Columbia Par Car. +++ 1990 and newer E-Z-GO +++ Also Cushman, Melex, Hyundai and others using Curtis electronic motor speed controller +++ Used across solenoids on Marketeer and Nordskog +++ Used across solenoids on Pargo model 544 with eight solenoids.

Resistor that goes across large posts on solenoid 1989 and newer E-Z-GO with electronic solid state speed controller +++ Also for 1990 and newer Club Car, Columbia Par Car, Cushman, Melex, Norrdskog, and Motrec with Curtis solid state speed control +++ 1989 and newer Yamaha with Curtis solid state speed control +++ 1990 to 1995 Hyundai electric.

Accelerator Rod Micro Switch with roller style lever arm with two male blade contacts for 1994 and newer E-Z-GO gas or electric.

Ball Stud for Governor to Carb Linkage on 1989 to 2002 E-Z-GO.

Brake and Accelerator Pedal Return Spring for 1965 to 1977 E-Z-GO Electric Marathon model +++ Also 1986-1/2 to 1993 E-Z-GO industrial models XI-775, 875, 881, PCX-952, 954, 955, 956, 957 and BCX-960... Also Brake Pedal Return Spring on 1971 and newer Melex... Also Legend.

Accelerator Return Spring for 1971 to 1976 E-Z-GO Gas and 1978 to 1980 E-Z-GO Electric Marathon models... Also Jacobsen.

NO LONGER AVAILABLE +++ Accelerator Pad Kit for 1994 and newer E-Z-GO Medalist and TXT models as well as industrial models +++ Also Cushman 280, 800, 2100, 2200 & 4800 Commanders.

Accelerator Compression Spring for 1994-1/2 E-Z-GO gas and electric model Medalist and TXT and many industrial carts +++ Also many Cushman industrial models including Titan, Commander and Bellhop.

Accelerator Compression Spring for 1989 to 2008 E-Z-GO gas Marathon, Medalist and TXT models and Industrial models.

Accelerator Compression Return Spring for 2002 to 2008 E-Z-GO gas ST350 and ST Sport +++ 2006 to 2009 gas MPT 800 and Sport II +++ 2003 gas Clays Car and Sport 2 + 2.

NO LONGER AVAILABLE +++ Accelerator Pedal Assembly for 1994 to 2009 E-Z-GO Medalist, TXT, and Shuttle Series Golf Carts +++ The Clays Car, the Oasis Beverage Carts, the Jacobsen 1000 Haulster +++ The Workhorse 800, 1000, and 1200, the ST480, ST350 and ST Sport Utility Vehicles +++ The Cushman 280, 800, 2100, 2200 & 4800 Commanders.

Upgraded Brass Bus Bar for Solenoids for 1979 to 1988 Club Car +++ 1975 and earlier E-Z-GO +++ Pre 1974 Pargo with seven solenoids +++ 11-1/2"

Governor Swivel Kit for 1981 to 1988 E-Z-GO with 2 cycle engine +++ Includes swivel, set screw, E-clip, and washer.

Accelerator and Choke Cable Clamp Kit for 1976 to 1994 E-Z-GO Pre Medalist Marathon X440 and X444 models +++ Also useful in other applications.

Varistor that goes across the B+ and B- posts on electronic motor speed controller on 1989 to 1994 pre Medalist E-Z-GO model X444 carts.