Right Wheel Cylinder for Westinghouse models 253 and 254 Industrial Flatbed +++ Has 15/16" bore.

Right Rear Wheel Cylinder for Westinghouse models 253 and 254 Flatbed Trucks

Left Wheel Cylinder for Westinghouse models 253 and 254 Industrial Flatbed +++ Has 15/16" bore.

Left Rear Wheel Cylinder for Westinghouse models 253 and 254 Flatbed Trucks

CURRENTLY ON BACK ORDER +++ Wheel Cylinder for Nordskog Marketeer models 262 & 264 and others with Lucas Girling brakes with 15mm bore, approximately 5/8".

Wheel Cylinder Repair Kit for Cushman with Bendix Torque Spider Style Brakes +++ 1976 to 2000 E-Z-GO Industrial Vehicles and Personnel Carriers models 875, X1-875, X1-875P, 881, 955, 957 and GXI-1500, GXT-1500 +++ Columbia Par Car BC2, BC3 and BC4 burden carriers with NKL axle +++ Karrior 2400 XP burden carrier +++ EVI models 720 and 820 +++ Also Jacobsen, Noland, Toro, Motrec, Taylor-Dunn and Nordskog with Torque Spider ++ All with 7/8" bore torque spiders.

Wheel Cylinder Repair Kit for Nordskog Marketeer models 262 & 264 and others with Lucas Girling brakes with 15mm bore, approximately 5/8".

Wheel Cylinder Mounting Kit for 1970 to 1973 Club Car Caroche model and some 1974 models with Lucas Girling wheel cylinders +++ 1966 to 1973 Harley Davidson gas model DC and 1969 to 1970 electric model DEC+++ For Front Brakes on 1969 to 1971 Taylor-Dunn models B, BN and M +++ Nordskog models 262 and 264 +++ Pargo industrial vehicles as well as Otis Westcoaster +++ All with Lucas Girling hydraulic brakes.

Wheel Cylinder Kit for early Nordskog models 282B with drum brakes.

Brake Torque Spider Repair Kit for Cushman with old style Bendix Hydraulic Brakes +++ 1976 to 2000 E-Z-GO Industrial Vehicles and Personnel Carriers models 875, X1-875, X1-875P, 881, 955, and 957 +++ 1989 to 1990 E-Z-GO GXT-1500 and GXI-1500 with Onan engine +++ Columbia Par Car BC2, BC3 and BC4 burden carriers with NKL axle +++ EVI models 720 and 820 +++ Karrior 2400 XP burden carrier +++ Also Jacobsen, Noland, Nordskog, Taylor-Dunn, Motrec, and Toro.

Torque Spider Piston for Cushman with Bendix Torque Spider Style Brakes +++ 1976 to 2000 E-Z-GO Industrial Vehicles and Personnel Carriers models 875, X1-875, X1-875P, 881, 955 and 957 +++ 1989 to 1990 E-Z-GO GXT-1800 and GXI-1500 with Onan engine +++ 1993 and newer Columbia Par Car BC2, BC3 and BC4 burden carriers with NKL axle +++ Karrior 2400 XP burden carrier +++ EVI models 720 and 820 +++ Also Jacobsen, Noland, Toro, Motrec, Taylor-Dunn and Nordskog with Torque Spider.

Torque Spider Cup for Cushman with Bendix Torque Spider Style Brakes +++ 1976 to 2000 E-Z-GO Industrial Vehicles and Personnel Carriers models 875, X1-875, X1-875P, 881, 955, 957 and GXI-1500, GXT-1500 +++ 1989 to 1990 E-Z-GO GXT-1800 and GXI-1500 with Onan engine +++ 1993 and newer Columbia Par Car BC2, BC3 and BC4 burden carriers with NKL axle +++ Karrior 2400 XP burden carrier +++ EVI models 720 and 820 +++ Also Jacobsen, Noland, Toro, Motrec, Taylor-Dunn and Nordskog with Torque Spider.

Torque Spider Boot for Cushman with Bendix Torque Spider Style Brakes +++ 1976 to 2000 E-Z-GO Industrial Vehicles and Personnel Carriers models 875, X1-875, X1-875P, 881, 955, 957 and GXI-1500, GXT-1500 +++ 1989 to 1990 E-Z-GO GXT-1800 and GXI-1500 with Onan engine +++ 1993 and newer Columbia Par Car BC2, BC3 and BC4 burden carriers with NKL axle +++ Karrior 2400 XP burden carrier +++ EVI models 720 and 820, Also Jacobsen, Noland, Toro, Motrec, Taylor-Dunn and Nordskog with Torque Spider.

NOW AVAILABLE +++ Complete Bendix "Style" Brake Torque Spider Assembly with pistons, seals and boots for Cushman Titan +++ Taylor-Dunn model G-150 and optional on R-380 +++ Also Motrec E-300, E-302, E-330, E-348, E-360 and others. +++ Karrior 2400 XP burden carrier +++ Noland and Toro +++ 2-1/8" center bore.

Stop Light and Horn Switch on Nordco Marketeer model 150 and Horn Switch on Nordskog models 280 and 282 +++ Also other carts and applications +++ NOTE: Uses 5/8" diameter mounting hole.

Brake Stop Light Switch for 1966 to 1982 Harley carts with hydraulic brakes +++ Cushman +++ Nordskog models 208 and 282 Industrial carts.

Hardened Driven Sprocket Spacer for Nordskog model 323 Tote'N Tow and model 535 Errand Master.

Spacer for Hydraulic Disc Brake Caliper Assembly for 1983 to 1988 Nordskog model 280/282 series with Ausco disc brakes +++ 1984 and newer Taylor-Dunn models B-246, B-248, B-254, BT-280 and Bigfoot also 1989 and newer B-660, B-661 and B-661E from serial number 127659 and 1988 to 1999 model R-380 and others +++ 1996 to 2008 gasoline powered Columbia Par Car models Eagle, Foursome, Utilitruck, Shuttle and Tram with hydraulic disc brakes.

CURRENTLY ON BACK ORDER +++ Parking Brake Strut and Lever Assembly Retaining Clip for 1974 to 1982 E-Z-GO Marathon and 1976 to 2000 E-Z-GO Industrial Vehicles and Personnel Carriers models 875, X1-875, X1-875P, 881, 955, and 957 +++ 1989 to 1990 E-Z-GO GXT-1800 and GXI-1500 with Onan engine +++ 1993 and newer Columbia Par Car BC2, BC3 and BC4 Burden Carrier, Summit, EU24 and other utility vehicles +++ Taylor-Dunn model G-150 and optional on R-380 +++ Motrec models E-330 and E-348 and others +++ EVI models 720 and 820 +++ Also Nordskog, Jacobsen, Cushman, Noland and Toro +++ Also Legend EV3-01 and EV4-01 and many other Industrial carts with Bendix Mechanical or Hydraulic Torque Spider Style Brakes.

Right Hand Red Brake Shoe Return Spring for 1974-1982 E-Z-GO Gas and Electric & 1989-1990 gas GXT-1500 & GXI-1500 and 1996 & newer models models 875, 881 and 950 +++ Cushman Titan +++ 1990s Nordskog/US Electricar Legend models 280A and 282A +++ Pargo/Eagle industrial vehicles +++ Taylor-Dunn model B-150 electric and G-150 gas and 1999 and newer R-380 model +++ 1993 and newer Columbia Par Car BC2, BC3 and BC4 Burden Carrier, Summit, EU24 and other utility vehicles with Green or Blue Spring +++ Karrior 2400 XP burden carrier +++ EVI 720 and 820 +++ Davis, Cushman, Toro, Motrec, and Jacobsen with old style Bendix Brakes +++ Legend EV3-01 and EV4-01.

Right Rear Passenger Side Hydraulic Disc Brake Caliper Assembly for 1983 to 1988 Nordskog model 280/282 series with Ausco disc brakes +++ 1984 and newer Taylor-Dunn models B-246, B-248, B-254 and 1989 and newer B-660, B-661 and B-661E from serial number 127659 and 1988 to 1999 model R-380 and others +++ 1996 to 2008 gasoline powered Columbia Par Car models Eagle, Foursome, Utilitruck, Shuttle and Tram with hydraulic disc brakes.

NOW AVAILABLE ++ You can use BH55-049 and just reverse park brake lever +++ Left Rear Drivers Side Hydraulic Disc Brake Caliper Assembly for 1983 to 1988 Nordskog model 280/282 series with Ausco disc brakes +++ 1984 and newer Taylor-Dunn models B-246, B-248, B-254 and 1989 and newer B-660, B-661 and B-661E from serial number 127659 and 1988 to 1999 model R-380 and others +++ 1996 to 2008 gasoline powered Columbia Par Car models Eagle, Foursome, Utilitruck, Shuttle and Tram with hydraulic disc brakes.

Rear Brake Drum for late 1970s to early 1980s E-Z-GO GT-7 Truck and Cushman Truckster +++ 1994 and newer E-Z-GO Industrial Vehicles +++ O.E.M on Taylor Dunn model B-150 electric and G-150 gas and 1999 and newer R-380 +++ Columbia Par Car burden carriers +++ 1990s Legend models 280A and 282A +++ Motrec with Dana differential.

NO LONGER AVAILABLE +++ Complete Aluminum Rear Brake Caliper Assembly for 1989 to 1991 Nordskog models 280/282 with Tol-O-Matic disc brakes with round brake pads +++ NOTE: Special order, two to three week lead time.

NO LONGER AVAILABLE +++ Complete Aluminum Rear Brake Caliper Assembly for 1991 to 1994 Nordskog models 280/282 with Tol-O-Matic disc brakes with kidney shaped brake pads +++ Special order, two to three week lead time.

Rear Brake Caliper Repair Kit for 1988 to 1990 Nordskog models 280/282 with Tol-O-Matic disc brakes with round pads +++ NOTE: Kit for one caliper includes 4 brake pads, 2 boots, 2 seals, 2 O-rings, 2 sliders and 4 screws.

Rear Brake Caliper Boot for 1994 and newer Legend/Nordskog models 280 and 282 with cast iron calipers +++ 2000 and newer Columbia Par Car burden carrier models BC2, BC3 and BC4 +++ Karrior model 2400XP burden carrier.

Rear Brake Cable for Nordskog models 280 series B, C and D +++ Goes from one brake lever to the other on the rear.

Rear Brake Cable for Nordskog models 282 series B, C and D +++ Goes from one brake lever to the other on the rear.

Pivot Bracket for Parking Brake on Hydraulic Disc Brake Caliper Assembly for 1983 to 1988 Nordskog model 280/282 series with Ausco disc brakes +++ 1984 and newer Taylor-Dunn models B-246, B-248, B-254 and 1989 and newer B-660, B-661 and B-661E from serial number 127659 and 1988 to 1999 model R-380 and others +++ 1996 to 2008 gasoline powered Columbia Par Car models Eagle, Foursome, Utilitruck, Shuttle and Tram with hydraulic disc brakes.

Pivot Arm for Parking Brake on Rear Hydraulic Disc Brake Caliper Assembly for 1983 to 1988 Nordskog model 280/282 series with Ausco disc brakes +++ 1984 and newer Taylor-Dunn models B-246, B-248, B-254 and 1989 and newer B-660, B-661 and B-661E from serial number 127659 and 1988 to 1999 model R-380 and others +++ 1996 to 2008 gasoline powered Columbia Par Car models Eagle, Foursome, Utilitruck, Shuttle and Tram with hydraulic disc brakes.

Front and Rear Brake Caliper Piston for 1988 to 1990 Nordskog models 280/282 with two piston Tol-O-Matic disc brakes with round pads.

Boot for Brake Caliper Piston on 1983 to 1988 Nordskog, Taylo-Dunn and Columbia Par Car with Ausco dual piston calipers.

Parking Brake Strut and Lever Assembly for Cushman Titan +++ 1976 to 2000 E-Z-GO Industrial Vehicles and Personnel Carriers models 875, X1-875, X1-875P, 881, 955, and 957 +++ 1989 to 1990 E-Z-GO GXT-1800 and GXI-1500 with Onan engine +++ 1993 and newer Columbia Par Car BC2, BC3 and BC4 Burden Carrier, Summit, EU24 and other utility vehicles +++ Taylor-Dunn model G-150 and optional on R-380 +++ Motrec models E-300, E-302, E-330, E-348 and others +++ Jacobsen Truck models 84005, 84006, 84013 and 84016 +++ EVI models 720 and 820 +++ Also Nordskog, Noland and Toro, and many other Industrial carts with Bendix Mechanical or Hydraulic Torque Spider Style Brakes.

No Longer Available +++ Use new style replacement drum part number BK22-223 +++ O.E.M. Brake Drum for late 1970s to early 1980s E-Z-GO GT-7 Truck and Cushman Truckster +++ 1994 and newer E-Z-GO Industrial Vehicles +++ O.E.M on Taylor-Dunn model B-150 electric and G-150 gas and 1999 and newer R-380 +++ Columbia Par Car burden carriers +++ 1990s Legend models 280A and 282A +++ Motrec with Dana differential.

Mounting Bracket for Hydraulic Disc Brake Caliper Assembly for 1983 to 1988 Nordskog model 280/282 series with Ausco disc brakes +++ 1984 and newer Taylor-Dunn models B-246, B-248, B-254 and 1989 and newer B-660, B-661 and B-661E from serial number 127659 and 1988 to 1999 model R-380 and others +++ 1996 to 2008 gasoline powered Columbia Par Car models Eagle, Foursome, Utilitruck, Shuttle and Tram with hydraulic disc brakes.

Plunger Style Micro Switch for Stop Lights with three terminals for 1971 to 1982 E-Z-GO gas and electric +++ Also used as the start/stop switch on early gas E-Z-GOs +++ Also 1981 and newer Club Car with lights +++ Also Otis.

Metal Master Cylinder Cap for Lucas Girling Master Cylinder used on Harley Davidson gas model DC from 1966 to 1972 and electric model DEC from 1969 to 1970 +++ Nordskog Marketeer models 262 & 264 +++ Pargo industrial carts +++ Otis Westcoaster +++ All with Lucas Girling brakes.

Master Cylinder for Westinghouse Marketeer models 427 and 428 +++ Westinghouse Marketeer model 253 three wheel industrial flatbed truck and model 254 four wheel version +++ Also early 1980s Nordskog 72 volt model 280E Husky and 72 volt model 282F Thunderbolt +++ Also early Nordskog model 280 and 282 B, C, and D models with drum brakes +++ Also Columbia Par Car Burden Carrier with 2 or 4 wheel drum brakes +++ NOTE: Will not work on later models with disc brakes.

OEM (Original Equipment Manufacture) Brake Master Cylinder for 2003 to 2012 E-Z-GO models MPT 800 gas, MPT 1200 gas, MPT 1000 electric, MPT 800 electric, Shuttle 2-4-6 2005 +++ Also Cushman Commander 280 +++ Will also replace Lucas Girling on early Harley Davidson, Nordskog, Pargo, Otis Westcoaser and others +++ Has 3/4" bore.

Master Cylinder Cap for Lucas Girling Master Cylinder used on Harley Davidson gas model DC from 1966 to 1972 and electric model DEC from 1969 to 1970 +++ Nordskog Marketeer models 262 & 264 +++ Pargo industrial carts +++ Otis Westcoaster +++ All with Lucas Girling brakes.

Master Cylinder Rebuild Kit for 1966 to 1972 Harley Davidson model DC gas and 1969 to 1970 model DEC electric +++ Nordskog Marketeer models 262 and 264 industrial carts +++ Otis, and Pargo with Lucas Girling brakes +++ All with 3/4" bore.

Brake Master Cylinder for Nordskog and US Electricar Payloader models 280/282 A,B,C,D with Tol-O-Matic disc brakes +++ Also Columbia Par Car Burden Carrier with 2 or 4 wheel disc brakes +++ Also EVI models 720 and 820..

Master Cylinder for 1966 to 1972 Harley Davidson model DC gas and 1969 to 1970 model DEC electric +++ Nordskog Marketeer models 262 and 264 industrial carts +++ Pargo model 850 Empire model and others with Lucas Girling brakes +++ Otis Westcoater +++ Replacement for 2003 to 2012 E-Z-GO models MPT 800 gas, MPT 1200 gas, MPT 1000 electric, MPT 800 electric +++ Cushman Commander 280 +++ Has 3/4" bore.

Kidney Shaped Brake Pads for one wheel for 1991 to 1994 Nordskog models 280 and 282 with Tol-O-Matic disc brakes +++ Includes 2 pads for one caliper.

Sealed Horn or Brake Stop Light Switch +++ Can be used as replacement horn switch on E-Z-GO as well as Nordco Marketeer model 150 and Nordskog models 280 and 282 and others +++ NOTE: Uses 5/8" diameter mounting hole.

Sealed Horn or Brake Stop Light Switch +++ OEM horn switch on 1993 and newer E-Z-GO gas and electric Marathon, TXT, Medalist and 835 industrial model.

Push Button Stop Light Switch for 1981 to 1996 Club Car model DS +++ Also Stop or Horn Button Switch for all makes +++ NOTE: Uses 5/8" diameter mounting hole.

Push Button Horn or Starter Switch for 1965 to 1981 Harley Davidson models DF and DC +++ Also Horn or Brake Light Switch for Nordskog and others +++ NOTE: Uses 5/8" diameter mounting hole.

Hill Brake Spring for 1965 and newer E-Z-GO +++ Also Melex and Legend.