Clip for attaching either a Brake Hose or Brake cable to the frame of the vehicle. Used on Cushman, E-Z-GO, Jacobsen, Taylor-Dunn and Motrec brake hoses and on Nordskog and Columbia Par Car brake cables... Used on other carts as well.

5/16"-18 Nylock Nut for Front and Rear Bumper on 1984 to 1992 Club Car model DS... Use with mounting bolt number BD44-271 and BD44-362. Two each required... Also for Brake Linkage on Nordskog and many other carts

Hand Brake Cable from Hand Brake to Rear Brake Cable on 2000 and newer Columbia Par Car Burden Carriers, Payloader models BC2, BC3, BC4 and Summits, Shuttles and MVPs... Also Brake Cable for 1980 to 1999 Nordskog Errand Master model 535 and 1992 and later Nordskog model 280A... Also emergency brake cable for Nordskog models 262/264 series E and 280/282 series B, C and D.

Brake Shoe Set of two for one wheel for 1966 to 1972 Harley Davidson gas model DC and 1969 to 1970 electric model DEC... Also Front Brake Shoes for 1969 to 1971 Taylor Dunn models B, BN, and M... Also Nordskog models 262 and 264, Pargo industrial vehicles as well as Otis Westcoaster with Lucas Girling hydraulic brakes.

Replacement Ten Tooth Brake Adjuster for 1974 to 1982 E-Z-GO Gas and Electric and 1989 to 1990 models GXT-1500 and GXI-1800 and 1991 to 1993 models XI-775, XI-875, XI-881 and Personnel Carrier models PCX-952, 954, 955, 956 and 957... Also 1974 to 1980 Club Car Caroche... Also 1990s Legend models 280A and 282A from serial number 280A92H019... Also front of Cushman three wheel... Also 1991 to 1994 Cushman GT-1 with mechanical brakes... Also Taylor Dunn model B-150 electric and G-150 gas and 1999 and newer R-380 model... Also Columbia Par Car BC2 Burden Carrier... Also Jacobsen Trucks models T2000, 84005, 84006, 84013 and 84016... Also Davis, Toro and Motrec... This adjuster is slightly shorter than the original but works fine.

Brake Pedal Return Spring for Westinghouse Marketeer models 139, 436, 437 and HMK Marketeer models 438 and 439... Also Nordskog "Marketeer" models 262 and 264.

Rear Brake Cable for Nordskog models 280 series B, C and D... Goes from one brake lever to the other on the rear.

Parking Brake Strut and Lever Assembly for Cushman Titan... Also 1976 to 2000 E-Z-GO Industrial Vehicles and Personnel Carriers models 875, X1-875, X1-875P, 881, 955, and 957... Also 1989 to 1990 E-Z-GO GXT-1800 and GXI-1500 with Onan engine... Also 1993 and newer Columbia Par Car BC2, BC3 and BC4 Burden Carrier, Summit, EU24 and other utility vehicles... Also Taylor-Dunn model G-150 and optional on R-380... Also Motrec models E-300, E-302, E-330, E-348 and others... Also Jacobsen Truck models 84005, 84006, 84013 and 84016... Also Nordskog, Noland and Toro, and many other Industrial carts with Bendix Mechanical or Hydraulic Torque Spider Style Brakes.

Parking Brake Strut and Lever Assembly Retaining Clip for 1974 to 1982 E-Z-GO Marathon and 1976 to 2000 E-Z-GO Industrial Vehicles and Personnel Carriers models 875, X1-875, X1-875P, 881, 955, and 957... Also 1989 to 1990 E-Z-GO GXT-1800 and GXI-1500 with Onan engine... Also 1993 and newer Columbia Par Car BC2, BC3 and BC4 Burden Carrier, Summit, EU24 and other utility vehicles... Also Taylor-Dunn model G-150 and optional on R-380... Also Motrec models E-330 and E-348 and others... Also Nordskog, Jacobsen, Cushman, Noland and Toro, and many other Industrial carts with Bendix Mechanical or Hydraulic Torque Spider Style Brakes.

Sealed Horn or Brake Stop Light Switch... Can be used as replacement horn switch on E-Z-GO as well as Nordco Marketeer model 150 and Horn Switch on Nordskog models 280 and 282 and others... NOTE: Uses 5/8" diameter mounting hole.

Wheel Cylinder Repair Kit for Nordskog Marketeer models 262 & 264 and others with Lucas Girling brakes with 15mm bore, approximately 5/8".

Brake Bleeder Screw Assembly for Ausco type Disc Brake Calipers used Taylor-Dunn, Nordskog and Columbia Par Car.

Brake Bleeder Screw Adapter for Ausco type Disc Brake Calipers used Taylor-Dunn, Nordskog and Columbia Par Car.

Front and Rear Brake Hose for Nordskog models 280 and 282 with drum or disc hydraulic brakes... Also 2000 and newer Columbia Par Car Payloader burden carriers, BC, BC2, BC3 and BC4... Also Karrior model 2400XP burden carrier... Also Rear Brake Hose for 1970 to 1980 Club Car Caroche model.

Disc Brake Caliper O-ring for 1983 to 1988 Nordskog model 280/282 series with Ausco disc brakes... Also 1984 and newer Taylor-Dunn models B-246, B-248, B-254 and 1989 and newer B-660, B-661 and B-661E from serial number 127659 and 1991 to 1999 model R-380... Also 1994 and newer Columbia Par Car Utilitruck, Shuttle, and Tram.

Caliper Brake Line Adapter Fitting for 1983 to 1988 Nordskog model 280/282 series with Ausco disc brakes... Also 1984 and newer Taylor-Dunn models B-246, B-248, B-254 and 1989 and newer B-660, B-661 and B-661E from serial number 127659 and 1988 to 1999 model R-380 and others... Also 1994 and newer Columbia Par Car Utilitruck, Shuttle, and Tram with hydraulic disc brakes... Also fuel line to glass bowl fuel filter on 1953 to 1961 Cushman series 780 Truckster and with Cushman Husky single cylinder L-head engine.

Brake Band Assembly for Westinghouse models 527A, 529 and 531A.

Rear Brake Cable for Nordskog models 282 series B, C and D... Goes from one brake lever to the other on the rear.

Brake Caliper Piston for 1988 to 1990 Nordskog models 280/282 with Tol-O-Matic disc brakes with round pads.

Brake Piston O-ring seal for 1988 to 1994 Nordskog models 280/282 with Tol-O-Matic disc brakes with round or kidney pads.

Brake Shoe Set of 2 for one wheel for 1974 to 1980 Club... Also for 1974 to 1976 Pargo golf cart model 544 and industrial models models 875, 950, and 950-S... Also 1993 to 1994 E-Z-GO gas XI300 and XI500 and 1993 to 1996 gas XI804... Also mid 1970s Eagle golf cart.

OEM (Original Equipment Manufature) Brake Master Cylinder for 2003 to 2012 E-Z-GO models MPT 800 gas, MPT 1200 gas, MPT 1000 electric, MPT 800 electric... Also Cushman Commander 280... Will also replace Lucas Girling on early Harley Davidson, Nordskog, Pargo, Otis Westcoaser and others... Has 3/4" bore.

Hardened Driven Sprocket Spacer for Nordskog model 323 Tote'N Tow and model 535 Errand Master.

6" Steel Brake Line for Nordskog and US Electricar Payloader models 280 and 282 A, B, C and D... Connects rear brake caliper to hose.

Brass Brake Line T-fitting... Connects three 3/16" steel brake lines with 3/8"-24 threads to 3/8"-24 Inverted Flare female T-fitting... Used on Cushman Taylor-Dunn, Columbia Par Car and many others.

Brake Caliper Piston for 1983 to 1988 Nordskog, Taylo-Dunn and Columbia Par Car with Ausco dual piston calipers.

Boot for Brake Caliper Piston on 1983 to 1988 Nordskog, Taylo-Dunn and Columbia Par Car with Ausco dual piston calipers.

Brake Shoe Set for 1966 to 1972 Harley Davidson gas model DC and 1969 to 1970 electric model DEC... Also 1970 to 1973 Club Car Caroche with Lucas Girling brakes... Also Front Brake Shoes for 1969 to 1986 Taylor-Dunn models B, BN and M... Also Nordskog models 262 and 264... Also Pargo industrial vehicles... Also Otis Westcoaster with Lucas Girling hydraulic brakes.

Sealed Horn or Brake Stop Light Switch... OEM horn switch on 1993 and newer E-Z-GO gas and electric Marathon, TXT, Medalist and 835 models.

Wheel Cylinder for Nordskog Marketeer models 262 & 264 and others with Lucas Girling brakes with 15mm bore, approximately 5/8".

Brake Shoe Hold Down Spring Kit for 1970 to 1973 Club Car Caroche model and some 1974 models... Also 1966 to 1973 Harley Davidson gas model DC and 1969 to 1970 electric model DEC... Also for Front Brakes on 1969 to 1986 Taylor-Dunn models B, BN, and M... Also Nordskog models 262/264... Also Otis Westcoaster... Also Pargo with Lucas Girling hydraulic brakes.

Master Cylinder Cap for Lucas Girling Master Cylinder used on Harley Davidson gas model DC from 1966 to 1972 and electric model DEC from 1969 to 1970, Also for Nordskog Marketeer models 262 & 264, Also Pargo industrial carts as well as Otis Westcoaster with Lucas Girling brakes.

No Longer Available... Brake Drum for Westinghouse models 436E, 436G, 437, 437A, and HMK Marketeer models 438 and 439... Also Nordskog models 139 and 262/264.

Brake Shoe Assembly for motor drum brake on Nordskog model 323 Tote N Tow and model 535 Errand Master.

Brake Drum for motor on Nordskog model 323 Tote N Tow and model 535 Errand Master, Also Nordskog model 539 and Legend Chariot... Has 15/16" bore.

Brake Drum for motor on Nordskog model 531 Errand Master... Has 3/4" bore.

Brake shoe Set for 1976 to 1982 E-Z-GO golf carts both gas and electric... Also 1976 to 2000 E-Z-GO Industrial Vehicles and Personnel Carriers... Also 1989 to 1990 gas E-Z-GO GXT-1500 and GXI-1500 Heavy Duty Truck... Also 1996 to 1998 G1500 gas Heavy Duty Truck and other years with hydraulic brakes... Also 1990s Legend models 280A and 282A... Also front of Cushman three wheel models... Also 1991 to 1994 Cushman GT-1... Also Taylor-Dunn model B-150 and 1985 and newer Taylor-Dunn model R-380 and others... Also 1993 and newer Columbia Par Car BC2, BC3 and BC4 Burden Carrier, Summit, EU24 and other utility vehicles... Also Jacobsen, Davis, Motrec, and Toro

Brake Band Assembly for Nordskog model 539 Chariot.

Master Cylinder for 1966 to 1972 Harley Davidson model DC gas and 1969 to 1970 model DEC electric... Also Nordskog Marketeer models 262 and 264 industrial carts... Also Pargo model 850 Empire model and others with Lucas Girling brakes... Also Otis Westcoater... Also replacement for 2003 to 2012 E-Z-GO models MPT 800 gas, MPT 1200 gas, MPT 1000 electric, MPT 800 electric... Also Cushman Commander 280... Has 3/4" bore.

Master Cylinder Rebuild Kit for 1966 to 1972 Harley Davidson model DC gas and 1969 to 1970 model DEC electric... Also Nordskog Marketeer models 262 and 264 industrial carts... Also Otis, and Pargo with Lucas Girling brakes with 3/4" bore.

Push Button Stop Light Switch for 1981 to 1996 Club Car model DS, Also Stop or Horn Button Switch for all makes... NOTE: Uses 5/8" diameter mounting hole.

Push Button Horn or Starter Switch for 1965 to 1981 Harley Davidson models DF and DC... Also Horn or Brake Light Switch for Nordskog and others... NOTE: Uses 5/8" diameter mounting hole.

Wheel Cylinder Mounting Kit for 1970 to 1973 Club Car Caroche model and some 1974 models with Lucas Girling wheel cylinders... Also 1966 to 1973 Harley Davidson gas model DC and 1969 to 1970 electric model DEC... Also for Front Brakes on 1969 to 1971 Taylor-Dunn models B, BN and M... Also Nordskog models 262 and 264, In addition Pargo industrial vehicles as well as Otis Westcoaster with Lucas Girling hydraulic brakes.

Park Brake Cable Return Spring for Nordskog models 280 and 282... Measures 5/8" diameter by 2-5/8" long.

Complete Bendix "Style" Brake Torque Spider Assembly with pistons, seals and boots for Cushman Titan... Also 1976 to 2000 E-Z-GO Industrial Vehicles and Personnel Carriers models 875, X1-875, X1-875P, 881, GTX-1500, GTI-1500, 955, and 957... Also Columbia Par Car BC2 Burden Carrier... Also Taylor-Dunn model G-150 and optional on R-380... Also Motrec E-300, E-302, E-330, E-348, E-360 and others... Also Jacobsen, Noland and Toro... 2-1/8" center bore.

Brake Torque Spider Repair Kit for Cushman with old style Bendix Hydraulic Brakes... Also 1976 to 2000 E-Z-GO Industrial Vehicles and Personnel Carriers models 875, X1-875, X1-875P, 881, 955, and 957... Also 1989 to 1990 E-Z-GO GXT-1800 and GXI-1500 with Onan engine... Also Columbia Par Car BC2, BC3 and BC4 burden carriers with NKL axle... Also Jacobsen, Noland, Nordskog, Taylor-Dunn, Motrec, and Toro.

Wheel Cylinder Repair Kit for Cushman with Bendix Torque Spider Style Brakes... Also 1976 to 2000 E-Z-GO Industrial Vehicles and Personnel Carriers models 875, X1-875, X1-875P, 881, 955 and 957... Also Columbia Par Car BC2, BC3 and BC4 burden carriers with NKL axle... Also Jacobsen, Noland, Toro, Motrec, Taylor-Dunn and Nordskog with Torque Spider.

Torque Spider Boot for Cushman with Bendix Torque Spider Style Brakes... Also 1976 to 2000 E-Z-GO Industrial Vehicles and Personnel Carriers models 875, X1-875, X1-875P, 881, 955 and 957... Also 1989 to 1990 E-Z-GO GXT-1800 and GXI-1500 with Onan engine... Also Columbia Par Car BC2, BC3 and BC4 burden carriers with NKL axle... Also Jacobsen, Noland, Toro, Motrec, Taylor-Dunn and Nordskog with Torque Spider.

Torque Spider Cup for Cushman with Bendix Torque Spider Style Brakes... Also 1976 to 2000 E-Z-GO Industrial Vehicles and Personnel Carriers models 875, X1-875, X1-875P, 881, 955 and 957... Also 1989 to 1990 E-Z-GO GXT-1800 and GXI-1500 with Onan engine... Also Columbia Par Car BC2, BC3 and BC4 burden carriers with NKL axle... Also Jacobsen, Noland, Toro, Motrec, Taylor-Dunn and Nordskog with Torque Spider.

Brake Shoe Return Spring for Westinghouse Marketeer models 139, 436, 437 & HMK Marketeer model 438 & 439, Measures 4-1/4" long, used top and bottom.