CURRENTLY ON BACK ORDER +++ Chrome Center Cap Set with Chrome Lug Nuts for Club Car and others with 2.650" diameter center hole +++ NOTE: Can be used with many stock rims on most Harleys and E-Z-GOs and others that use 1/2"-20 lug nuts.

Rotary Arm Return Spring for Speed Control Box on Nordskog late models 262 and 264 and early models 280/282B series +++ Also Nordco model 450 4-Runner. .

Chrome 1/2"-20 tpi Lug Nut Set of 16 for four wheels.

Brake Shoe Return Spring for Westinghouse Marketeer models 139, 436, 437 & HMK Marketeer model 438 & 439 +++ Measures 4-1/4" long +++ Used top and bottom.

Locking Chrome Lug Nut Set of four with key +++ Has 1/2"-20 threads per inch

Accelerator Return Spring for Speed Control Box on Nordskog models 535 Errand Master, 323 Tote'N Tow, 280/282 and model 150.

Brake Shoe Hold Down Spring for mid sixties to mid seventies Westinghouse Marketeer models 139, 436, 437 and HMK Marketeer models 438 and 439 +++ 1992 and earlier Nordskog 280/282 model A before serial number 280A92H019 with cast iron Dana differential +++ 1-1/4" long.

Shock Absorber Bushing Kit for all years E-Z-GO, Club Car, Melex, Cushman, Westinghouse, Taylor-Dunn +++ Also many others.

Shock Reducer Bushing for ST300 Shock absorber used on many Cushman vehicles +++ Used on rear shocks on E-Z-GO and Pargo 900 series +++ Upper sleeve on 1975 to 1985 Taylor-Dunn Tee Bird models GT-370 and GT-371 +++ 5/8" O.D. down to 7/16" I.D.

Shock Reducer Bushing for ST300 Shock absorber +++ For use when using this shock on rear of 1971 to 1994 E-Z-GO gas carts +++ 5/8" O.D. down to 3/8" I.D.

Right Hand Red Brake Shoe Return Spring for 1974-1982 E-Z-GO Gas and Electric & 1989-1990 gas GXT-1500 & GXI-1500 and 1996 & newer models models 875, 881 and 950 +++ Cushman Titan +++ 1990s Nordskog/US Electricar Legend models 280A and 282A +++ Pargo/Eagle industrial vehicles +++ Taylor-Dunn model B-150 electric and G-150 gas and 1999 and newer R-380 model +++ 1993 and newer Columbia Par Car BC2, BC3 and BC4 Burden Carrier, Summit, EU24 and other utility vehicles with Green or Blue Spring +++ Karrior 2400 XP burden carrier +++ EVI 720 and 820 +++ Davis, Cushman, Toro, Motrec, and Jacobsen with old style Bendix Brakes +++ Legend EV3-01 and EV4-01.

Left and Right Hand Green and Red Brake Shoe Return Spring for 1974-1982 E-Z-GO Gas and Electric & 1989-1990 gas GXT-1500 & GXI-1500 +++ 1996 & newer models models 875, 881 and 950 +++ Cushman Titan +++ 1990s Nordskog/US Electricar Legend models 280A and 282A +++ EVI models 720 and 820, Pargo/Eagle industrial vehicles +++ Taylor Dunn model B-150 electric and G-150 gas and 1999 and newer R-380 model +++ 1993 and newer Columbia Par Car BC2, BC3 and BC4 Burden Carrier, Summit, EU24 and other utility vehicles +++ Karrior: 2400 XP burden carrier +++ Davis, Cushman, Toro, Motrec, Polaris and Jacobsen with old style Bendix Brakes +++ Legend EV3-01 and EV4-01.

Spring for Speed Control Pivot Bar on 1965 to 1975 Westinghouse Marketer models 436E, 436G, 437 and 437A +++ Also fits Nordco Marketeer model 139, one required +++ Also Movable Contact on Forward and Reverse Switch on Nordskog model 535 Errand Master +++ Also model 323 Stock Chaser and model 450 4-Runner golf cart +++ Two required.

Slotted Castle Rear Axle Nut for 1991 and newer E-Z-GO with 4 cycle engine +++ 1996 and newer E-Z-GO Gas and Electric 4 and 6 Passenger Shuttle, ST Express, 875, 881, 950 +++ Cushman Truckster, Haulster and Titan Vehicles +++ Front Spindle Castle Nut for 1974 to 2003 Club Car gas and electric models +++ Front Spindle Nut for Taylor-Dunn model 248 and others +++ Front Axle nut on Marketeer "Lynx" model 427 golf cart +++ Motrec Front Spindle and Kingpin Nut on many models +++ Also for Shuttlecraft.

7/8"-14 Thin Nylock Flywheel Nut for 1982 to 1995 Columbia Par Car with 2 stroke engine... Many other applicatons

Bushing for Brake Pedal Assembly on Westinghouse Marketeer models 436, 437 and HMK Marketeer models 438 and 439 and Nordco 4-Runner model 450 and model 139 +++ Also Nordskog industrial models 260, 262, 280, 282, and 300.

Rear Axle Hub Key for 1963 to early 1973 Harley Davidson electric Models DE, DEF and DEC +++ 1963 to 1973 gas Models D, DC, DF and D4 +++ Also motor sprocket key on 2000 and newer Columbia Par Car 17 and 19 tooth drive sprockets +++ Also motor sprocket key for Nordskog models 280 & 282 series C & D and US Electicar Tote'N Tow models 325B & 325C

Stainless Steel Body Support Reinforcement Screw used on 967 to 1981 Harley Davidson gas and electric models +++ Many other applications +++ 1/4-20 x 7/8"

Stainless Steel Replacement Fillister Head OEM Style Crankcase Screw on 1963 to 1981 Harley Davidson models D, DF, DC and DF +++ Also Air Shroud Mounting Screw on 1963 to 1966 Harley Davidson models D and DF and 1963 to 1968 model DC +++ Many other applications.

Fillister Head OEM Crankcase Screw on 1963 to 1981 Harley Davidson models D, DF, DC and DF +++ Many other applications +++ Measures 1/4-20 x 2-1/4".

Input Gear Retaining Snap Ring for 1986-1/2 and newer E-Z-GO electric +++ 1993 to 2013 Columbia Par Car electric +++ 1990 to 1995 Hyundai +++ 1990 to 2008 Yamaha electric models G8-G27 +++ 2005 & newer Cushman Titan, 875 and Personnel Carriers +++ 1986 & newer Melex electric models 412E, 512E & 625E +++ 1998 and newer Taylor-Dunn model R-380 +++ 1992 and newer Nordskog model 280A.+++ Motrec 330-E and other models +++ All with Dana electric differential +++ Rear Axle Bearing Retainer for 1970 to 1980 Club Car Caroche, Pargo golf carts, early E-Z-GO golf carts and mid 1980s burden carriers, All with Terrill differentials.

Chrome Bag Hook Nut for 1965 to 1981 gas and electric Harley Davidson and 1982 to 1987 Columbia Par Car gas and electric models +++ Many other applications.

5/16" Type B Flat Washer for Battery Hold Down Rod on 1981 to 2006 Club Car electric model DS +++ Also can be used with many other battery hold rods and other applications.

1/4-20 x 1-1/4" Pan Head Screw used on 1976 to 1978 Harley Davidson model DE40 on top support +++ Many other applications.

Stainless Steel Allen Head Replacement Crankcase Screw on 1963 to 1981 Harley Davidson models D, DF, DC and DF +++ Also Air Shroud Mounting Screw on 1963 to 1966 Harley Davidson models D and DF and 1963 to 1968 model DC +++ Many other applications.

Stainless Steel Allen Head Replacement Crankcase Screw on 1963 to 1981 Harley Davidson models D, DF, DC and DF +++ Many other applications. +++ Measures 1/4-20 x 2-1/4".

Left Hand Thread Tie Rod End Jam Nut for 1986 to 1989 Columbia Par Car +++ 1965 to mid 2001 E-Z-GO +++ 1974 to 1990 Melex +++ Also Cushman, Pargo, Legend +++ Also others with 9/16"-18 left hand thread jam nuts.

7/16"-20 Castle Nut for Tie Rod End and King Pin on 1986 to 1989 Columbia Par models P4G, P4E, G4S, E4S, GU4, and EU4 +++ Tie Rod Nut on 2000 and newer Payloader Burden Carrier +++ Also used on 1965 and newer E-Z-GO +++ Also used on Cushman, Melex, Nordskog, Pargo and others with 9/16" right hand threads +++ Many other applications.

Front Bumper Carriage Bolt for 1984 to 1992 Club Car model DS +++ Uses mounting nut number BD427B +++ Two each required.

Hairpin Style Clip for Accelerator Cable Clevis Pin for 1979 to 2009 Yamaha gas models G1, G2, G3, G5, G8, G9, G11, G14, G16, G19, G20, G21, G22, G23, G27, G28 +++ Also 2007 and newer Yamaha model YDR, "The Drive" +++ Also 1986 to 1997 Taylor-Dunn model R-680 truck +++ Many other applications.

Seat Brake Lockout Knob E-Clip Retaining Ring for 1976 and 1977 Harley Davidson model DE-40 +++ 1979 to 1982 model MGIV +++ 1980 to 1981 Governor Control Cable End Retaining E-Clip used on FU11-108 +++ 1/4"

1/4-20x 11/16" Slotted Fillister Head Screw for Seat Hinge Mounting on 1967 to 1981 Harley Davidson model DEC +++ Solenoid Mounting Screw on 1963 to 1965 models DE, DEF and DEC +++ Many other applications.

Brake Ratchet Counter Sunk Allen Head Cap Screw for 1967 to 1981 gas Harley Davidson models D and D4 +++ 1967 to 1975 electric model DE +++ 1967 to 1968 model DEC +++ 1977 to 1982 DE3 +++ Many other applications +++ Measures 10-24 x 1-5/32" long.

5/16" x 1" Clevis Pin for 1976 and newer E-Z-GO Brake Cables +++ 1981 and newer Club Car +++ Harley Davidson, Columbia Par Car +++ Cushman +++ Taylor-Dunn +++ Davis +++ Jacobsen +++ Karrior +++ Legend +++ Melex +++ Nordskog +++ Pargo +++ Many other carts and applications as well +++ Has 3/4" usable length.

Chrome Lug Nut, 1/2" by 20 threads per inch +++ Fits most Douglas wheels plus stock wheels on +++ Harley Davidson +++ Columbia Par Car +++ Club Car +++ Cushman +++ E-Z-GO +++ Jacobsen +++ Melex +++ Nordskog +++ Pargo +++ Taylor-Dunn.

3/16" x 7/16" x 5/8" Large Black Head Pop Rivet for securing Fender Caps other trim on all years of E-Z-GO +++ Can be used on other carts and applications.

Chrome 1/2" by 20 tpi Lug Nut. Fits many carts.

Black Chrome 1/2" by 20 threads per inch Lug Nut +++ Standard threads on Club Car +++ E-Z-GO +++ Harley Davidson +++ Columbia Par Car +++ Taylor-Dunn +++ Pargo +++ and others +++ Does not fit Yamaha and Hyundai.

7/16"-20 Nylock Nut for King Pin, Tie Rod and Front Spring on 1986 to 2008 Columbia Par Car models P4G, P4E, G4S, E4S, GU4, EU4, C6E, C6G, GD4 and ED4... Also used on Cushman.

Nylock Nut for Battery Hold Down Rod for Club Car Precedent models from 2004 and newer. +++ Top of Shock and King Pin Nut on 1981 and newer model DS +++ 1967 and newer Harley Davidson and Columbia Par Car, many applications +++ 1989 & newer E-Z-GO, too many applications to list.

7/16"-20 Thin Jam Nut with Left Hand Thread for Tie Rod End Shank on 1990 to late 2000 Columbia Par Car models P4G, P4E, G4S, E4S, GU4, EU4, C6E, C6G, GD4 and ED4.

5/16"-18 Nylock Nut for Front and Rear Bumper on 1984 to 1992 Club Car model DS +++ Use with mounting bolt number BD44-271 and BD44-362. Two each required +++ Also for Brake Linkage on Nordskog and many other carts +++ Can be used on battery hold down rods.

1/2"-20 Sway Bar Jam Nut for 1976 to 1978 Harley Davidson mode DE-40 and 1979 to 1982 model MG-IV +++ Steering Link Rod End Jam Nut for 1965 to 1974 Pargo three wheel cart +++ Also for 1980 and older Pargo model 873 and 1983 and newer model 830 beginning with serial # 8304311182 +++ Also Pargo model 813 and 815 +++ Also Westinghouse industrial models 253 and 254 +++ Tie Rod Jam Nut and Crankshaft Nut on some Cushman models.

King Pin Nut for 1981 and newer Club Car +++ Lower shock mount nut on 3 wheel E-Z-GO +++ Tie Rod End Nut on Columbia Par Car SU5 & Expediter EX21 +++ Rod End Nylock Nut for Stud End for 1965 to 1974 Pargo three wheel cart +++ For 1980 and older Pargo model 873 and 1983 and newer model 830 beginning with serial # 8304311182 +++ Pargo models 812, 813, 814 and 815.

Steel Oversized Rear Bumper Washer used on 1963 to 1973 gas Harley Davidson models D, DF, and D4 and 1963 to early 1969 electric models DE and DEF +++ Many other applications.

1/4" x 13/16" x 11/16" Christmas Tree Style Push In Black Plastic Rivet for E-Z-GO, Club Car, Yamaha, Harley Davidson and Columbia Par Car and others.

1/2-20 Steel Lug Nut for 1974 and newer Club Car +++ Also Harley Davidson and Columbia Par Car +++ Also all years of E-Z-GO +++ Also Cushman, Taylor Dunn, Jacobsen, Motrec, and others,

1/4-20 x 3/4" Bolt for Taylor-Dunn Five Speed J Hook with 2 holes +++ Also for mounting Dual Cup Holder on 1993 and newer Club Car model DS +++ Also for mounting J Hook on mid 1970s Eagle golf cart made in Long Beach California by Lad Industries +++ Also for mounting solenoid on 1963 to 1993 pre-Medalist Speed Board +++ Also Speed Control on Harley Davidson DE-40.

5/8"-18 Thin Jam Nut on crankshaft to hold Primary Clutch on 1963 to 1981 Harley Davidson models D, DF, DC and D4 +++ Harley Davidson and Columbia Par Car Pitman Arm Retaining Nut +++ Steering wheel nut for Taylor-Dunn +++ Front Axle Nut for 1965 to 1984 Cushman 3 wheel Haulster and Truckster.

1"-14 Thin Castle Nut for 1981 and newer E-Z-GO front spindle.