Set of 4 Twin Lead Brush Set for 2003 & newer E-Z-GO with Advanced motor in models MPT 800 & 1000, also Express & Terrain models +++ 2006 and newer Club Car Villager and TransPorter models with IQ Plus system with 3.7hp motor +++ Also Motrec and Nordskog with Advanced motors with twin lead brushes +++ Note: If your motor uses 8 brushes you will need to order two sets.

G.E. Motor Insulating Bushing Kit for G.E. Motor with Square Insulating Bushing for old style GE Motors used on Harley Davidson +++ Also 1984 to 1993 Club Car +++ Also Cushman, E-Z-GO, Davis, Noland, and others.

19 Tooth Motor Sprocket for early 1980s Nordskog Marketeer models 72 volt 280E Husky and 282F Thunderbolt +++ 1980 and newer Nordskog models 280 and 282 series B +++ All with Silent Type Multi-Link Drive Chain +++ Also 2000 and newer Columbia Par Car BC-4 Burden Carrier

19 Spline, 8.3 HP Peak, 3250 RPM, 36 Volt Heavy Duty Replacement Motor +++ For 1988 and newer E-Z-GO non DCS and PDS +++ 1990 to 2002 Yamaha G8, G9, G14 and G16 +++ 1986 and newer Melex models 412E, 512E, 625E and newer models with Dana differential +++ 1990 to 2000 Columbia Par Car +++ 1990 to 1995 Hyundai +++ 1992 and newer Nordskog model A after serial number 280A92H019.

24 Volt, 1.3 HP Motor with 3/4" keyed output shaft for Cushman Stock Chase +++ Also for some Taylor-Dunn, Columbia Par Car and Nordskog/US Electracar Legend

17 Tooth Motor Sprocket for early 1980s Nordskog Marketeer models 72 volt 280E Husky and 282F Thunderbolt and Nordskog models 280 & 282 series C & D and US Electicar Tote'N Tow models 325B & 325C with Silent Type Multi-Link Drive Chain +++ Also 2000 and newer Columbia Par Car BC-5 Burden Carrier

45 Link, Silent Type Multi-Link Drive Chain for some early 1980s Nordskog Marketeer models 72 volt 280E Husky and 282F Thunderbolt +++ Nordskog models 280 & 282 series D +++ Nordskog/Electricar models 325B and 325C Tote'N Tow +++ Also 2000 and newer Columbia Par Car BC-4 burden carrier

52 Link, Silent Type Multi-Link Drive Chain for some early 1980s Nordskog Marketeer models 72 volt 280E Husky and 282F Thunderbolt +++ 1980 and newer Nordskog models 280 and 282 series C +++ Also 2000 and newer Columbia Par Car BC5 burden carrier

15 Tooth Motor Sprocket for Nordskog Marketeer with Silent Type Multi-Link Drive Chain.

13 Tooth Motor Sprocket for Westinghouse model 539 Chariot.

18 Tooth Motor Sprocket for Nordskog model 539 Chariot.

NO LONGER AVAILABLE +++ General Electric Factory Original Field Coils for 1981 to 1986-1/2 E-Z-GO 2 hp Motor +++ 1979 to 1986 models EV3-01/EV4-01 and RV3-01/RV4-0... Also 1984 to 1986 Club Car +++ Others with 10 internal spline or 16 external spline motors with all 4 studs on one end.

Electric Motor Bearing on Harley Davidson +++ E-Z-GO +++ Club Car +++ Cushman +++ Taylor-Dunn +++ Nordskog +++ Yamaha and others with General Electric, Baldor or Hitachi motors.

NOW AVAILABLE +++ 24 to 36 Volt Motor for Nordskog models 539 Chariot, 535 Errand Master and Nordskog model 323 Tote'N Tow and Nordskog/Legend model 325 A Tote'N Tow +++ Also some Columbia Par Car carts.

Brush Holder Assembly for GE Motors with pull type brush springs used on 1963 to 1971 Harley Davidson models DE, DEF, DEC and 1972 to 1973 models DE and DE4 +++ 1965 to 1972 E-Z-GO... Also pre 1980 Club Car +++ Pre 1985 Melex models 102, 202, 112, 212, 152, 252, and early 412 with band brake on motor +++ Westinghouse and HMK Marketeer models 436, 436G, 437 and 437A +++ Also Cushman, Taylor-Dunn, Nordskog, and Pargo.

Insulator Kit for Advanced Motor used on 2004 and newer Club Car Precedent +++ Also for E-Z-GO and Yamaha with Advanced Motor +++ Also Nordskog.

Woodruff Key for Motor Drive Sprocket on many Nordskog and Marketeer models.

NO LONGER AVAILABLE +++ Extremely Rare Good Used 1.5 Horsepower, 36 Volt, 2800 rpm electric Motor for 1966 to 1971 Harley Davidson model DE and DEC with 4 tooth Tapered Spiral Tooth output gear on drive end and a 3/4" output shaft for a disc brake on the other end...Also for 1965 to 1971 E-Z-GO...Also early 436 and 437 model Westinghouse Marketeer with tapered axles...Also Melex model

Brush Holder with Springs for Advanced motors used on certain Club Car, Taylor-Dunn, Columbia Par Car, Western, Motrec, Nordskog/US Electracar Legend, Think, Gem and also industrial vehicles.

NO LONGER AVAILABLE +++ Use BR22-088 +++ Brush Spring for Advanced motors used on certain E-Z-GO +++ Club Car +++ Taylor-Dunn +++ Columbia Par Car +++ Western +++ Motrec +++ Nordskog/US Electricar Legend +++ Think +++ Gem +++ Also various industrial vehicles.

47 Link, Silent Type Multi-Link Drive Chain for 1990 and newer Nordskog model 535 Errand Master +++ Also 2000 and newer Columbia Par Car BC-4 burden carrier.

53 Link, Silent Type Multi-Link Drive Chain for some early 1980s Nordskog Marketeer models 72 volt 280E Husky and 282F Thunderbolt +++ 1980 and newer Nordskog models 280 and 282 series B +++ Can be used 2000 and newer Columbia Par Car BC5 burden carrier.

OEM (Original Equipment Manufacture) Brush Spring for Advanced motors used on certain E-Z-GO +++ Club Car +++ Taylor-Dunn +++ Columbia Par Car +++ Western +++ Motrec +++ Nordskog/US Electricar Legend +++ Think +++ Gem +++ Also various industrial vehicles.

Complete Motor Rebuild for 1.5 Horsepower, 36 Volt, 2800 rpm electric Motor for 1966 to 1971 Harley Davidson model DE and DEC with 4 tooth Tapered Spiral Tooth output gear on drive end and a 3/4" output shaft for a disc brake on the other end +++ Also for 1965 to 1971 E-Z-GO +++ Also early 436 and 437 model Westinghouse Marketeer with tapered axles +++Also Melex model

Brush for Advanced motors used in some E-Z-GO, Bombardier, Duffy Boats, Nordskog, and other industrial vehicles and lift trucks

Round Fiber Washer for old style GE Motors used on +++ Harley Davidson +++ Club Car +++ Cushman +++ E-Z-GO +++ Davis +++ Noland +++ Otis +++ Legend +++ Taylor-Dunn +++ Pargo and others.

Round Fiber Washer for old style GE Motors used on +++ Harley Davidson +++ Cushman +++ E-Z-GO +++ Davis +++ Noland +++ Pargo +++ Nordskog +++ Taylor-Dunn and others.

Square Fiber Washer for old style GE Motors used on Harley Davidson, Cushman, E-Z-GO, Noland, HMK Marketeer and others.

Rear Axle Hub Key for 1963 to early 1973 Harley Davidson electric Models DE, DEF and DEC +++ 1963 to 1973 gas Models D, DC, DF and D4 +++ Also motor sprocket key on 2000 and newer Columbia Par Car 17 and 19 tooth drive sprockets +++ Also motor sprocket key for Nordskog models 280 & 282 series C & D and US Electicar Tote'N Tow models 325B & 325C

Brush Spring for G.E. Motor used on 1986 to 1992 Columbia Par Car +++ 1980 and newer Club Car +++ 1988 and newer E-Z-GO new style G.E. motor 58 or 59 JBS "Tin Can style" (no field studs, smooth case) +++ HMK Marketeer models 438 and 439 +++1985 and newer Melex models 412, 512 and 625 +++ Cushman motor brush spring and speed board brush spring +++ Taylor-Dunn model B-150, B-248 and others +++ 1990 to 2002 Yamaha G5, G8, G9, G14, G16 and G19 +++ Davis, Legend, Noland, Nordskog, Otis and Pargo

Square Insulating Bushing for old style GE Motors used on Harley Davidson, Club Car, Cushman, E-Z-GO, Davis, Noland, Nordskog Marketeer and others.

Motor Drive End Seal for 1966 to 1971 Harley Davidson DE and DEC +++ 1965 to mid 1970 E-Z-GO +++ Melex pre 1985 +++ Westinghouse Marketeer models 436 and 437 +++ All with square mounting flange and tapered pinion shaft gear on armature.

Drive End Electric Motor Seal for 1971 to mid 1986 E-Z-GO model X440 and X444 Marathon... Also Nordco Marketeer model 139 and Nordskog models 280 and 282... also Davis.

Pull Type Brush Spring for GE Motors used on 1963 to 1971 Harley Davidson +++ 1965 to 1972 E-Z-GO +++ Pre 1980 Club Car. +++ Pre 1985 Melex +++ Cushman, Taylor-Dunn, Westinghouse Marketeer, Nordskog, and Pargo.

Copper Field Coil Repair Stud with square shoulder for:..Harley Davidson... E-Z-GO... Club Car... and many others with GE Motor.

NO LONGER AVAILABLE +++ Screw On Motor Repair Stud for repairing broken field coil studs on GE Motors... 5/16" by 18 coarse thread.

Bearing for Commutator end on electric motor on Melex models 101, 102, 112, 212, 152, 252 and 412 +++ Also 1966 to 1971 Harley Davidson +++ Also 1965 to 1975 Cushman and others +++ Also early E-Z-GO and Nordskog.

Motor Shaft Pinion Seal for 1976 to 1978 Harley Davidson model DE40 +++ 1979 to 1982 model MGIV with AMF motor +++ 1983 to 1989 Columbia Par Car models DE3, DEX4, E3, E4, P4E and E4S with G.E. motor +++ Also Nordco Marketeer model 450.

Pinion Bearing Seal for 1976 to 1988 E-Z-GO gas models with Dana Differential +++ Also Nordskog.

Inner Rear Axle Bearing for 1984 and newer Club Car model DS and Precedent +++ Fan Side Crankshaft Bearing for 1982 to 1995 Columbia Par Car/Harley and 1996 to 2000 Columbia Par Car Rear Axle Bearing +++ Differential Bearing on some Cusman +++ Differential Bearing for 1991 and newer E-Z-GO 4 cycle +++ Input Shaft Bearing opposite output side on Yamaha gas carts models G1, G2, G8, G9, G11, and G14 and Input Shaft Bearing on inner side of 1992 and older Yamaha model G9 electric +++ Differential Bearing on Cushman, Pargo and Noland with Terril Differential and Drive End Motor Bearing for Westinghouse motor on 1960s Marketeer models 425 and 427.

NO LONGER AVAILABLE +++ Brush Crossover Cable with Stud for 1984 to early 1986 Columbia Par Car with G.E. Motor with disc brake +++ Also E-Z-GO, Club Car, Cushman, Taylor-Dunn, Nordskog and Pargo with G.E. motor with brush cable interconnects.

Brush Set of 4 for GE Motors with cable lead crossovers for +++ 1973 to 1975 Harley Davidson models DE and DE4 +++ 1977 to 1978 Harley model DE3 and 1976 +++ 1978 Harley model DE-40 +++ 1984 to 1985 Columbia Par Car with disc brake on motor +++ 1981 to 1985 Club Car +++ 1976 to 1977 HMK Marketeer models 438 and 439 and model 450 4-Runner +++ E-Z-GO, Cushman, Pargo, Taylor-Dunn, Nordskog and Davis.

Brush set with hook for GE Motors used on 1963 to 1971 Harley Davidson models DE, DEF, DEC and 1972 to 1975 models DE and DE4 +++ Also pre 1980 Club Car +++ Also 1965 to 1972 E-Z-GO +++ Also pre 1985 Melex +++ Also Cushman, Taylor-Dunn, Pargo, Westinghouse Marketeer, Otis and Nordskog.

NO LONGER AVAILABLE +++ Use BR11-140 +++ Brush Crossover Bar with glass cloth, without pad for early Harley Davidson with G.E. Motor +++ HMK Marketeer models 438 and 439 +++ Nordco Marketeer model 139 and Nordco model 450 4-Runner +++ E-Z-GO, Cushman,Taylor-Dunn, Noland, Nordskog, Otis, and Pargo.

Double Row Bearing for Drive end with Pinion Gear on electric motor on Melex models 101, 102, 112, 212, 152, 252 and 412 +++ Also early E-Z-GO +++ Nordskog Westinghouse models 436 and 437 +++ 1966 to 1970 Harley Davidson model DE and DEC with old style GE motor +++ All with square mounting flange.

Brush Spring Set for Twin Lead Brush and Triple Lead Brush on many Series Wound GE Motors used on E-Z-GO, Club Car, Yamaha, Nordskog, Western and Baker lift trucks

Twin Lead Brush Set for many Series Wound GE Motors used on E-Z-GO, Club Car, Yamaha, Nordskog, Western and Baker lift trucks

Three Lead Brush Set for Series Wound GE Motors used on some Club Car, Taylor-Dunn and Raymond lift trucks.

Brush Holder for Series Wound GE Motors used on some Club Car, Taylor-Dunn and Raymond lift trucks.

Brush Crossover Lead for Series Wound GE Motors used on some Club Car, Taylor-Dunn and Raymond lift trucks.