ONLY ONE AVAILABLE +++ Tapered Bore Rear Axle Bearing for 1963 to 1972 Harley Davidson gas models D, DF, DC and D4 +++ Also 1963 to 1971 Harley Davidson electric models DE, DEF, and DEC +++ Some pre 1976 E-Z-GO +++ 1960 to 1965 Cushman Golfster & Industrial series 731 and 732 & Truckster series 780 +++ Also Nordskog Westinghouse models 436 and 437 with a tapered keyed rear hub +++ Also Turf Rider IV rear axle bearing +++ Also some Melex

NO LONGER AVAILABLE +++ .005" Thick Rear Axle Bearing Shim for 1963 to 1972 Harley Davidson gas models D, DF, DC and D4 +++ Also 1963 to 1971 Harley Davidson electric models DE, DEF, and DEC +++ Some pre 1978 E-Z-GO +++ 1960 to 1965 Cushman Golfster & Industrial series 731 and 732 & Truckster series 780 +++ Also Nordskog Westinghouse models 436 and 437 with a tapered keyed rear hub +++ Also Turf Rider IV rear axle bearing +++ Also some Melex

.010" Thick Rear Axle Bearing Shim for 1963 to 1972 Harley Davidson gas models D, DF, DC and D4 +++ Also 1963 to 1971 Harley Davidson electric models DE, DEF, and DEC +++ Some pre 1978 E-Z-GO +++ 1960 to 1965 Cushman Golfster & Industrial series 731 and 732 & Truckster series 780 +++ Also Nordskog Westinghouse models 436 and 437 with a tapered keyed rear hub +++ Also Turf Rider IV rear axle bearing +++ Also some Melex

NO LONGER AVAILABLE +++ NOS Stained Tapered Bore Rear Axle Bearing for 1963 to 1972 Harley Davidson gas models D, DF, DC and D4 +++ Also 1963 to 1971 Harley Davidson electric models DE, DEF, and DEC +++ Some pre 1976 E-Z-GO +++ 1960 to 1965 Cushman Golfster & Industrial series 731 and 732 & Truckster series 780 +++ Also Nordskog Westinghouse models 436 and 437 with a tapered keyed rear hub +++ Also Turf Rider IV rear axle bearing +++ Also some Melex

Worm Shaft Bearing and Race Set for Steering Box for 1970 to 1983 Club Car +++ Also for late 1967 to 1981 Harley Davidson 3 and 4 Wheel gas & electric carts and 1982 to 1986 Columbia Par Car +++ Also Cushman, Taylor-Dunn, Nordskog, Melex, Davis, Otis, and Pargo.

Double Row Bearing for Drive end with Pinion Gear on electric motor on Melex models 101, 102, 112, 212, 152, 252 and 412 +++ Also early E-Z-GO +++ Nordskog Westinghouse models 436 and 437 +++ 1966 to 1970 Harley Davidson model DE and DEC with old style GE motor +++ All with square mounting flange.

Output Clutch Side Crankshaft Bearing 1994 to 1996 Melex 16 cubic inch, 9 hp black Vanguard engine.

Tapered Differential Carrier Bearing and Race Assembly 1963 to 1976 Harley Davidson electric models DE, DEF and DEC and 1976 to 1978 DE-40 +++ 1977 to 1982 DE-3 and 1979 to 1982 MGIV. +++ 1963 to 1972 gas models D, DF DC and D4 and 1973 to early 1977 and 1978 to 1981 models D and D4 +++ 1982 to 1983 Columbia Par Car models D3 and DX4 and 1984 to 1985 models G3, G4 and U4 +++ Also Melex Carrier Bearing Race with Dana differential with tapered axles +++ Front fork bearing on 1963 to 1969 electric models DE and DEC, and gas models D, DF and DC.

Pinion Bearing Race used on 1963 to 1982 Harley Davidson gas & electric models +++ 1983 to 1989 Columbia Par Car electric and 1983 to 1994 gas models +++ 1977 to 1994 E-Z-GO gas Marathon models +++ HMK Marketeer models 438 and 439 and Nordco Marketeer model 150 and 1992 and earlier Nordskog models 280 and 282 model A +++ Also Melex pinion bearing with Dana differential.

Fork Stem Bearing with built in Seal for 1965 to 1993 three wheel pre-Medalist E-Z-GO +++ Lower fork stem bearing on Legend three wheel models EV3-01 and RV3-01 +++ Upper and lower fork stem bearing on all three wheel Melex

Fan Side Crankshaft Bushing and Seal Kit for 1994 to 1996 Melex 16 cubic inch, 9 hp black Vanguard engine.

Rear Axle Bearing Race for 1963 to 1972 Harley Davidson gas models and 1963 to 1971 electric +++ E-Z-GO some pre 1978 +++ Westinghouse Marketeer models 436 and 437 with tapered axle. +++ 1960 to 1965 Cushman Golfster and Industrial series 731 and 732 and Truckster series 780 and 1960 to 1965 Truckster series 780 +++ Also Nordskog, Turf Rider IV and some Melex.

Tapered Differential Carrier Bearing used on Harley Davidson electric and gas models from 1963 to 1985 +++ Upper Fork Stem Bearing on Legend three wheel carts models EV3-01 and RV3-01 +++ Also Melex differential carrier bearing with Dana differential.

Crankshaft bearing for 1976 to 1993 E-Z-GO +++ 1996 to 2008 Columbia Par Car +++ 1990 to 1995 Hyundai +++ 1996 to 2000 Melex +++ 1978 to 1989 Yamaha +++ 1965 to 1968 Cushman K181 Kohler engine +++ Camshaft bearing for 1984 to 1991 Club Car with 351cc KF82 Kawasaki engine.

Outer Rear Axle Bearing for 1976 to 1984 Club Car +++ Inner Wheel Bearing on 1987 to 1995 Columbia Par Car +++ Outer rear axle bearing on Terrill Differentials used on early E-Z-GO, Cushman, Pargo and Noland +++ 1989 and newer E-Z-GO gas & electric differential input shaft bearing +++ 1993 & newer Yamaha input shaft bearing on electric differentials on G9-G22 +++ 1990 to 1995 Columbia Par Car inner input shaft bearing on models P4E, E4S, EU4 and outer input shaft on C6E +++ Rear Axle Bearing on 1991 to 1994 Cushman GT-1, GT America, Bellhop 2,3,4 and F-2 and F2J +++ Yamaha front inner wheel bearing on 1982 to 2021 G1-G29 +++ Inner wheel bearing on 1990 to 1995 Hyundai +++ 1986 to 1997 Taylor-Dunn front inner wheel bearing on model R-680 truck.

Differential Carrier Bearing for 1990 to 1995 gas Columbia Par Car/Harley Davidson models P4G, G4S, GU4, GD4, and C6G and 1995 to 2000 gas 4 cycle models GU2400, GU2400XB, and C10G +++ Output Shaft Bearing on 1988 and newer electric E-Z-GOs and Differential Carrier Bearing on 2008 and newer E-Z-GO model RXV +++ Carrier Bearing on 1990 to 1995 Hyundai +++ Carrier Bearing on 1993 and newer electric Yamaha models G14, G16, G19, and G22 and gas models G16, G20, G21, and G22.

O-Ring Seal Kit for 1988 and newer E-Z-GO gas and electric +++ 1990 to 2013 Columbia Par Car electric +++ 2006 and newer Cushman Titan electric +++ 1986 and newer Melex models 412E, 512E, 625E +++ 1990 to 1995 Hyundai electric +++ 1998 and newer Taylor-Dunn electric model R-380 +++ 1990 to 2007 Yamaha electric models G8-G27 +++ Motrec E-330 and other models +++ All models above with Dana differential.

Rear Axle and Motor Bearing for Club Car +++ Columbia Par Car +++ Cushman +++ E-Z-GO +++ Harley Davidson +++ Noland +++ Nordskog, Pargo +++ Yamaha +++ and Taylor-Dunn

Rear Axle Bearing for 1978 to 1995 Harley Davidson and Columbia Par Car gas & electric and 1996 to present Columbia Par Car electric +++ 1976 & newer E-Z-GO Rear Axle Bearing & 1994 to 2000 E-Z-GO Steering Pinion Bearing +++ 1953 to 1994 series 730, 731 Industrial & Minute Miser and 1954 to 1958 series 732 & 733 Golfster +++ 2005 and newer electric Cushman models 875, Titan, and Personnel Carrier +++ 1979 to 1981 Yamaha G1 inner wheel bearing and 1995 and newer rear axle or wheel bearing for G14 to G29 +++ Rear Axle Bearing for Nordco Marketeer models 139 and 150 & 450 4-Runner and 1992 and earlier 280/282 +++ Also Melex, Cushman, Taylor-Dunn, Davis, Jacobsen, Hyundai.

Output Clutch Side Crankcase Seal for 1996 to 2000 Melex 18 cubic inch, 9 hp red Vanguard engine +++ Also 1996 to 2008 Columbia Par Car with 18 cubic inch, 9 hp Vanguard engine.

Fan Side Crankcase Seal for 1996 to 2000 Melex 18 cubic inch, 9 hp red Vanguard engine +++ Also 1996 to 2008 Columbia Par Car with 18 cubic inch, 9 hp Vanguard engine.

Bearing for Commutator end on electric motor on Melex models 101, 102, 112, 212, 152, 252 and 412 +++ Also 1966 to 1971 Harley Davidson +++ Also 1965 to 1975 Cushman and others +++ Also early E-Z-GO and Nordskog.

Hub Bearing Race for 1982 to 1984 Cushman 18hp Police Haulster and 1988 to 1995 Titan front hub +++ Harley Davidson MGIV Carrier Bearing Race +++ Fork Stem Bearing Race for 1965 to 1993 three wheel pre-Medalist E-Z-GO +++ Also Legend three wheel models EV3-01 and RV3-01 +++ Also all three wheel Melex.

Tapered Differential Carrier Bearing Race used on 1963 to 1976 Harley Davidson electric models DE, DEF and DEC and 1976 to 1978 DE-40 +++ 1977 to 1982 DE-3 and 1979 to 1982 MGIV. +++ 1963 to 1972 gas models D, DF DC and D4 and 1973 to early 1977 and 1978 to 1981 models D and D4 +++ 1982 to 1983 Columbia Par Car models D3 and DX4 and 1984 to 1985 models G3, G4 and U4 +++ Also Melex Carrier Bearing Race with Dana differential.

Crankcase Seal for both sides on 1994 to 1996 Melex 16 cubic inch, 9 hp black Vanguard engine.

Front Wheel Bearing for Club Car +++ Cushman +++ Columbia Par Car +++ E-Z-GO +++ Harley Davidson +++ Jacobsen +++Legend +++Melex +++ Nordskog +++ Otis +++ Pargo +++ Taylor-Dunn +++ Toro +++ Westinghouse.

Transmission Bearing for many Cushman models from 1965 to 1995 +++ Transaxle Inner Input Shaft Bearing for 1988 and newer E-Z-GO electric and 1991 and newer E-Z-GO 4 cycle gas +++ 1984 to 1991 Club Car gas Dynamic Balancer bearing +++ Also 1990 to 2013 Columbia Par Car electric input shaft bearing and gas balancer shaft bearing +++ Also 1986 to 2014 Yamaha electric input shaft bearing and electric steering pinion bearing +++ Also Taylor-Dunn, Hyundai, Nordskog and Motrec input shaft bearing on electric Dana differential +++ Also used on Toro with Dana differential..

Valve Stem Seal for 1996 to 2000 Melex with red 9 hp, 18 cubic inch Vanguard engine +++ 1996 to 2008 Columbia Par Car 9 hp, 18 cubic inch and 13 hp, 24 cubic inch Vanguard engine.

Pinion Bearing Race used on 1963 to 1982 Harley Davidson gas & electric models +++ 1983 to 1989 Columbia Par Car electric and 1983 to 1994 gas models +++ 1977 to 1994 gas E-Z-GO +++ HMK Marketeer models 438 and 439 +++ Nordco Marketeer model 150 and Also1992 and earlier models 280 and 282 model A +++ Also Melex pinion bearing with Dana differential.

Pinion Bearing Adjustment Shim used on 1963 to 1982 Harley Davidson gas & electric models +++ 1983 to 1989 Columbia Par Car electric and 1983 to 1994 gas models +++ 1977 to 1994 gas E-Z-GO +++ HMK Marketeer models 438 and 439 +++ Nordco Marketeer model 150 and Also1992 and earlier models 280 and 282 model A +++ Also Melex pinion bearing with Dana differential.

NO LONGER AVAILABLE +++ Pinion Bearing Adjustment Shim used on 1963 to 1982 Harley Davidson gas & electric models +++ 1983 to 1989 Columbia Par Car electric and 1983 to 1994 gas models +++ 1977 to 1994 gas E-Z-GO +++ HMK Marketeer models 438 and 439 +++ Nordco Marketeer model 150 and Also1992 and earlier models 280 and 282 model A +++ Also Melex pinion bearing with Dana differential.

NOW AVAILABLE +++ Flanged Rear Axle Seal assembly including gasket for 1963 to 1972 gas & electric Harley Davidson models +++ 1965 to 1972 E-Z-GO +++ 1960 to 1999 Cushman +++ 1971 to 1986 Melex models 112 to 412.

NO LONGER AVAILABLE +++ Upper Steering Tube Bushing for 1968 to 1982 Harley Davidson +++ 1976 to 1987 Club Car electric +++ 1965 to 1970 E-Z-GO +++ Westinghouse Marketeer models 436, 437, 438 and 439 +++ Also Cushman, Jacobsen, Melex, Noland, Nordskog, Otis and Pargo

Commutator End Bearing for Starter/Generator on 1972 to 1995 Harley. +++ Com End on 1978 to 1993 E-Z-GO 2 cycle and 1991 and newer 4 cycle +++ Com End on Club Car +++ Com end on 1978 and newer Yamaha G1-G28 and YDR "The Drive". +++ Com end on Melex, and Hyundai +++ Com end on 1986 to 1997 Taylor-Dunn model R-680 truck. +++ Clutch Pilot Bearing for 1960 and newer Cushman model 735 and ruckster, or Haulster with 9hp, 18hp or 22hp OMC engine.

Motor Seal for Cushman models with 48 volt GE motor +++ Also 36 volt Melex models 152, 252, and 412 from serial number 155059 and newer with General electric motor and rear brakes.

Valve Stem Seal for 1994 to 1996 Melex with black 9 hp, 16 cubic inch Vanguard engine.

Front Wheel Bearing Seal for 1963 to 1981 Harley Davidson 3 Wheel and 1982 to 1986 Columbia Par Car 4 wheel model G3 +++ 1967 and newer E-Z-GO 3 Wheel +++ Melex three and four wheel models 101, 102, 112, 152, 212, 252 and early 412 +++ Also Pargo, Toro +++ All with 3/4" Axle.

Rear Axle Seal for 1978 to 1981 Harley Davidson gas models D and D4 and electric models DE3 from 1978 to 1982 and model MGIV from 1979 to 1982 +++ 1982 to 2007 Columbia Par Car gas and electric models +++ 1976 to 1994 E-Z-GO gas 2 cycle & 1978 and newer electric +++ 1990 and newer Yamaha G8 to G27 +++ Nordco Marketeer models 139 and 150 as well as model 450 4-Runner +++ Melex model 512E and 625E +++ Taylor-Dunn models SS-536 and MX-600 +++ Jacobsen, Hyundai and Davis.

Rear Axle Seal for 1960 to 1999 Cushman models +++ 1965 to 1972 E-Z-GO +++ 1963 to 1972 Harley Davidson +++ Many Melex models.

Inner Rear Axle Seal for Melex pre 1985 models 102, 202, 112, 212, 152, 252, and early 412 with band brake on motor.

Motor Drive End Seal for 1966 to 1971 Harley Davidson DE and DEC +++ 1965 to mid 1970 E-Z-GO +++ Melex pre 1985 +++ Westinghouse Marketeer models 436 and 437 +++ All with square mounting flange and tapered pinion shaft gear on armature.

Rear Axle Bearing Retainer Gasket for 1973 to early 1977 Harley Davidson gas models D and D4 and electric models DE and DE4 +++ 1973 to 1976 E-Z-GO +++ 1960 to 1975 Cushman models 731, 732, 734, 735, 736, and GC300 and GC400 +++ Westinghouse model 262 and HMK Marketeer models 438 and 439.

Flanged Rear Axle Seal Gasket for 1965-1972 E-Z-GO +++ 1960 to 1964 Cushman model 735 gas and 1964 to 1967 model 736 Electric and Gas Deluxe Golfster and Executive model industrial cart and 1968 to 1975 Gran Cushman Golfsters models GC 300 and GC400 +++ 1960 to 1994 three and four wheel Cushman Trucksters, Haulsters and Titan models +++ 1963 to 1972 gas Harley Davidson models D, DF, DC, D4 +++ For electric models DE, DEF and DEC from 1963 to 1971 +++ Also Melex models 112, 212, 152, 252, 412. +++ Also Davis.

Rubber Bushing for Shock Absorber and Engine Stabilizer 1967 to 1997 Harley Davidson and Columbia Par Car +++ Upper shock bushing on 1971 to 1994 E-Z-GO Marathon 2 cycle gas and 1991 to 1994, 4 cycle gas +++ Lower shock mount busing on Melex 3 wheel model 102.

NO LONGER AVAILABLE +++ Upper Steering Tube Dust Seal Cover Gasket for late 1968 to 1981 Harley Davidson gas and electric +++ 1976 to 1994 Club Car +++ 1965 to 1970 E-Z-GO +++ Also Cushman, Davis, Jacobsen, Melex, Noland, Nordskog, Otis and Pargo

Freeze Plug Seal for 1988 and newer Dana Differential on E-Z-GO electric and 2 cycle gas +++ 2005 and newer Cushman models 875, Titan, and Personnel Carrier +++ 1986 and newer Melex electric models 412E, 512E and 625E +++ 1995 and newer Yamaha electric G14, G16 and G19 +++ 1990 and newer Columbia Par Car electric models.

Input Gear Retaining Snap Ring for 1986-1/2 and newer E-Z-GO electric +++ 1993 to 2013 Columbia Par Car electric +++ 1990 to 1995 Hyundai +++ 1990 to 2008 Yamaha electric models G8-G27 +++ 2005 & newer Cushman Titan, 875 and Personnel Carriers +++ 1986 & newer Melex electric models 412E, 512E & 625E +++ 1998 and newer Taylor-Dunn model R-380 +++ 1992 and newer Nordskog model 280A.+++ Motrec 330-E and other models +++ All with Dana electric differential +++ Rear Axle Bearing Retainer for 1970 to 1980 Club Car Caroche, Pargo golf carts, early E-Z-GO golf carts and mid 1980s burden carriers, All with Terrill differentials.

Rear Axle Bearing Retainer Snap Ring for 1976 and newer gas and electric E-Z-GO +++ 1990 to 1994 Cusman Minute Miser +++ 1978 to 1983 & 1996 and newer Harley Davidson/Columbia Par Car +++ 1986 & newer Melex electric models 412E, 512E & 625E +++ 1990 to 1995 Hyundai... Nordco Marketeer models 139, 150, 450, 280/282 +++ 1995 to 2006 Yamaha G14-G22.

Black Polyurethane performance upgrade Bushing for Shock Absorber and Engine Stabilizer 1967 to 1997 Harley Davidson and Columbia Par Car +++ Also upper shock bushing on 1971 to 1994 E-Z-GO Marathon 2 cycle gas and 1991 to 1994, 4 cycle gas +++ Also lower shock mount busing on Melex 3 wheel model 102 +++ Also other shocks with 5/8" shock bushings.

Red Polyurethane performance upgrade Bushing for Shock Absorber and Engine Stabilizer 1967 to 1997 Harley Davidson and Columbia Par Car +++ Upper shock bushing on 1971 to 1994 E-Z-GO Marathon 2 cycle gas and 1991 to 1994, 4 cycle gas +++ Lower shock mount busing on Melex 3 wheel model 102 +++ Also other shocks with 5/8" shock bushings.