Woodruff Key for Starter/Generator Pulley on late 1969 to 1995 Harley Davidson and Columbia Par Car 2 cycle gas models with either Bosch or Hitachi starter/generators +++ 1984 to 1996-1/2 Club Car generator pulley +++ 1990 to 1995 Hynudai starter/generator pulley +++ Melex and E-Z-GO with Hitachi starter/generator +++ Also Cushman brake cam.

Whiz Lock Style Nut for 1965 to 1985 E-Z-GO +++ 1976 to 1978 Harley model DE-40 +++ 1971 to 1985 Melex +++ 1973 to 1976 Pargo model 544 with eight solenoids +++ Also Cushman +++ Many other applications.

5/16" Type B Flat Washer for Battery Hold Down Rod on 1981 to 2006 Club Car electric model DS +++ Also can be used with many other battery hold rods and other applications.

Thick Rear Axle Washer for 1977 and newer E-Z-GO +++ Also 1978 to 1989 Harley Davidson and Columbia Par Car rear brake drum or hub washer +++ Also Front Axle Washer for 1963 and newer Harley Davidson 3 wheel gas and electric models +++ Also Harley transmission output adapter +++ Also Cushman rear axle hub.

Front Spindle Hub Washer for Melex models 212, 252, 412, 512 and 625.

Shock Reducer Bushing for ST300 Shock absorber used on many Cushman vehicles +++ Used on rear shocks on E-Z-GO and Pargo 900 series +++ Upper sleeve on 1975 to 1985 Taylor-Dunn Tee Bird models GT-370 and GT-371 +++ 5/8" O.D. down to 7/16" I.D.

Shock Reducer Bushing for ST300 Shock absorber +++ For use when using this shock on rear of 1971 to 1994 E-Z-GO gas carts +++ 5/8" O.D. down to 3/8" I.D.

Shock Absorber Bushing Kit for all years E-Z-GO, Club Car, Melex, Cushman, Westinghouse, Taylor-Dunn +++ Also many others.

Inner A-arm Rubber Grommet for Melex models 412, gas and electric model 512 and 625E +++ Also Front and Rear Leaf Spring Bushing +++ Also 1999 Taylor-Dunn model ER-200 Rover.

Input Gear Retaining Snap Ring for 1986-1/2 and newer E-Z-GO electric +++ 1993 to 2013 Columbia Par Car electric +++ 1990 to 1995 Hyundai +++ 1990 to 2008 Yamaha electric models G8-G27 +++ 2005 & newer Cushman Titan, 875 and Personnel Carriers +++ 1986 & newer Melex electric models 412E, 512E & 625E +++ 1998 and newer Taylor-Dunn model R-380 +++ 1992 and newer Nordskog model 280A.+++ Motrec 330-E and other models +++ All with Dana electric differential +++ Rear Axle Bearing Retainer for 1970 to 1980 Club Car Caroche, Pargo golf carts, early E-Z-GO golf carts and mid 1980s burden carriers, All with Terrill differentials.

Retaining Ring for holding ramp plate to fixed face hub assembly on Salsbury/Comet style drive clutch used Melex gas models 512 and 625 +++ Also 1984 to 1987 Club Car DS model with 341cc KF-82 engine for serial number AG8414-53441 thru AG8801-13720 +++ Also for 1990 to 1995 Hyundai gas carts.

Steel Oversized Rear Bumper Washer used on 1963 to 1973 gas Harley Davidson models D, DF, and D4 and 1963 to early 1969 electric models DE and DEF +++ Many other applications.

Black Polyurethane performance upgrade Bushing for Shock Absorber and Engine Stabilizer 1967 to 1997 Harley Davidson and Columbia Par Car +++ Also upper shock bushing on 1971 to 1994 E-Z-GO Marathon 2 cycle gas and 1991 to 1994, 4 cycle gas +++ Also lower shock mount busing on Melex 3 wheel model 102 +++ Also other shocks with 5/8" shock bushings.

Red Polyurethane performance upgrade Bushing for Shock Absorber and Engine Stabilizer 1967 to 1997 Harley Davidson and Columbia Par Car +++ Upper shock bushing on 1971 to 1994 E-Z-GO Marathon 2 cycle gas and 1991 to 1994, 4 cycle gas +++ Lower shock mount busing on Melex 3 wheel model 102 +++ Also other shocks with 5/8" shock bushings.

Hairpin Style Clip for Accelerator Cable Clevis Pin for 1979 to 2009 Yamaha gas models G1, G2, G3, G5, G8, G9, G11, G14, G16, G19, G20, G21, G22, G23, G27, G28 +++ Also 2007 and newer Yamaha model YDR, "The Drive" +++ Also 1986 to 1997 Taylor-Dunn model R-680 truck +++ Many other applications.

Outer A-arm steel inner bushing for models 412E, 512 E&G and 625E +++ Also 1999 Taylor-Dunn model ER-200 Rover.

14mm by 1.5 tpi Nut for Starter/Generator on 1969 to 1981 Harley Davidson and 1982 and newer Columbia Par Car +++Also fits all Bosch, Hitachi, Reliance and others used on E-Z-GO, Club Car, Hyundai, Melex and Yamaha.

1/2-20 Steel Lug Nut for 1974 and newer Club Car +++ Also Harley Davidson and Columbia Par Car +++ Also all years of E-Z-GO +++ Also Cushman, Taylor Dunn, Jacobsen, Motrec, and others,

Locking Chrome Lug Nut Set of four with key +++ Has 1/2"-20 threads per inch

Inner A-arm steel inner bushing for models 412E, 512 E&G and 625E +++ Also 1999 Taylor-Dunn model ER-200 Rover.

Inner Steel Bushing for Rubber Leaf Spring Grommet for Melex models 412, gas and electric model 512 and 625E.

Rubber Bushing for Shock Absorber and Engine Stabilizer 1967 to 1997 Harley Davidson and Columbia Par Car +++ Upper shock bushing on 1971 to 1994 E-Z-GO Marathon 2 cycle gas and 1991 to 1994, 4 cycle gas +++ Lower shock mount busing on Melex 3 wheel model 102.

Seat Brake Lockout Knob E-Clip Retaining Ring for 1976 and 1977 Harley Davidson model DE-40 +++ 1979 to 1982 model MGIV +++ 1980 to 1981 Governor Control Cable End Retaining E-Clip used on FU11-108 +++ 1/4"

Parking Brake Clevis for 1969 to 1985 Taylor-Dunn model B-248 and others.

Parking Brake Clevis for Taylor-Dunn.

5/16" by 1-1/8" Brake Cable Clevis Pin for Taylor-Dunn and others +++ 7/8" usable area.

5/16" x 1" Clevis Pin for 1976 and newer E-Z-GO Brake Cables +++ 1981 and newer Club Car +++ Harley Davidson, Columbia Par Car +++ Cushman +++ Taylor-Dunn +++ Davis +++ Jacobsen +++ Karrior +++ Legend +++ Melex +++ Nordskog +++ Pargo +++ Many other carts and applications as well +++ Has 3/4" usable length.

3/8" by 3/4" Brake Cable Clevis Pin for Taylor-Dunn and others +++ 1/2" usable area.

3/8" by 1" Brake Cable Clevis Pin for Taylor-Dunn and others +++ 7/8" usable area.

1/4"-5/16" Fuel Line Clamp for Club Car, Columbia Par Car, E-Z-GO, Harley Davidson and many others.

Chrome Lug Nut, 1/2" by 20 threads per inch +++ Fits most Douglas wheels plus stock wheels on +++ Harley Davidson +++ Columbia Par Car +++ Club Car +++ Cushman +++ E-Z-GO +++ Jacobsen +++ Melex +++ Nordskog +++ Pargo +++ Taylor-Dunn.

Chrome 1/2"-20 tpi Lug Nut Set of 16 for four wheels.

CURRENTLY ON BACK ORDER +++ Chrome Center Cap Set with Chrome Lug Nuts for Club Car and others with 2.650" diameter center hole +++ NOTE: Can be used with many stock rims on most Harleys and E-Z-GOs and others that use 1/2"-20 lug nuts.

Chrome 1/2" by 20 tpi Lug Nut. Fits many carts.

Brake Shoe Return Spring for all Melex with mechanical and hydraulic brakes for models 112, 212, 152, 252, 412, 512, 625, and industrial models +++ Also 1999 Taylor-Dunn model ER-200 Rover.

Long Brake Hose Clip for attaching Brake Hose to the frame of the vehicle on Cushman and many other carts.

Brake Band Return Spring for 1978 and older E-Z-GO and Melex.

Brake Pedal Assembly Bushing for 1985 and newer Melex models 102, 202, 112, 212, 412, 512, 625, 666 and 667.

Black Chrome 1/2" by 20 threads per inch Lug Nut +++ Standard threads on Club Car +++ E-Z-GO +++ Harley Davidson +++ Columbia Par Car +++ Taylor-Dunn +++ Pargo +++ and others +++ Does not fit Yamaha and Hyundai.

9/16"-18 Right Hand Thread Tie Rod End Thin Jam Nut for 1986 to 1989 Columbia Par Car and 2000 and newer Payloader Burden Carrier +++ 1965 to mid 2001 E-Z-GO +++ 1974 to 1990 Melex +++ Also Cushman, Pargo, Legend and others.

Left Hand Thread Tie Rod End Jam Nut for 1986 to 1989 Columbia Par Car +++ 1965 to mid 2001 E-Z-GO +++ 1974 to 1990 Melex +++ Also Cushman, Pargo, Legend +++ Also others with 9/16"-18 left hand thread jam nuts.

7/8"-14 Thin Nylock Flywheel Nut for 1982 to 1995 Columbia Par Car with 2 stroke engine... Many other applicatons

7/16"-20 Thin Flex Lock Nut for Steering Pivot Pin on Taylor-Dunn model ET-150 and others.

7/16" Split Lock Washer used in many applications on E-Z-GO, Club Car, Cushman, Harley Davidson, Columbia Par Car, Nordskog, Taylor-Dunn and many other carts and applications.

Slotted Castle Type Rear Axle Nut for 1963 to 1981 Harley Davidson and 1982 to 1995 Columbia Par Car +++ Pinon Nut for 1963 to 1993 Harley gas models and 1963 to 1965 electrics +++ Front Axle Nut for 1963 to 1969 Harley Davidson gas & electric three wheel carts +++ 1976 and newer E-Z-GO Rear Axle and Pinion Nut +++ Taylor-Dun Axle Nut +++ Also Melex, Pargo, Cushman and Jacobsen.

5/8" Split Lock Washer used in many applications on E-Z-GO, Club Car, Cushman, Harley Davidson, Columbia Par Car, Nordskog, Taylor-Dunn and many other carts and applications.

5/32" x 9/16" x .470" Aluminum Pop Rivet used on 1994-1/2 to 2007 E-Z-GO Medalist, TXT, M5 & other models for attaching mat and elsewhere +++ Can be used on other carts and applications.

Stainless Steel Pop Rivet used on E-Z-GO Gas & Electric Vehicles in front/mid/rear body, body panels, DCS (Drive Control System) battery/connections, PDS (Precision Drive System) installs, front cowl and various other parts assemblies. +++ Can be used on other carts and applications.

5/16"-24 Right Hand Thread Thin Jam Nut for Harley Davidson and Columbia Par Car +++ Also many applications on E-Z-GO, Melex, Cushman, Pargo, Legend and others.

5/16"-18 Nut for Battery Hold Down Rod on 1976 to 2006 Club Car model DS & XRT +++ 1974 & newer E-Z-GO +++ Exhaust nut on E-Z-GO 2-stroke engines +++ Many other carts & applications.