1"-14 Thin Castle Nut for 1981 and newer E-Z-GO front spindle.

5/16"-18 Nylock Nut for Front and Rear Bumper on 1984 to 1992 Club Car model DS +++ Use with mounting bolt number BD44-271 and BD44-362. Two each required +++ Also for Brake Linkage on Nordskog and many other carts +++ Can be used on battery hold down rods.

Hairpin Style Clip for Accelerator Cable Clevis Pin for 1979 to 2009 Yamaha gas models G1, G2, G3, G5, G8, G9, G11, G14, G16, G19, G20, G21, G22, G23, G27, G28 +++ Also 2007 and newer Yamaha model YDR, "The Drive" +++ Also 1986 to 1997 Taylor-Dunn model R-680 truck +++ Many other applications.

Lever Return Spring for PB-5 and PB-6 Style Potentiometer (Pot Box)

Replacement Accelerator Ball Joint and Stud for 1976 to 1994 E-Z-GO Pre Medalist Marathon X440 and X444 models.

1/4"-20 standard course thread Nut for many applications on 1963 and newer Harley Davidson. +++ Also Club Car, Cushman, E-Z-GO, Legend, Pargo, Jacobsen, Taylor-Dunn and others.

Motor Sprocket Woodruff Key for 1970 to 1972 Taylor-Dunn GT338 and GT348 +++ 1971 to 1979 models B, BN and M +++ 1972 to 1975 models GT-360 and GT 370 +++ 1975 to 1985 GT-371 and GT-372 +++ 1990s 48 volt Taylor Truck model B and electric model R-380.

Banjo Bolt Fitting with 1/8" pipe threads for stop light switch for BK44-590 Master Cylinder used on 1970 to 1980 Club Car electric Caroche model... +++ 1974 to 1980 Elmco Royal Ride +++ 1974 to 1976 Pargo electric model 544 +++ Mid 1970s Eagle golf cart made in Long Beach California by Lad Industries +++ All above carts +++ NOTE: Has 1/2"-20 male threads with 1/8" (.120" by 27 tpi) internal pipe threads.

Large Hole Copper Washer for Banjo Bolt on Master Cylinder on 1970 to 1980 Club Car electric Caroche model +++ Cushman Truckster and Titan models +++ Taylor-Dunn +++ 1974 to 1980 Elmco Royal Ride +++ 1974 to 1976 Pargo electric model 544 +++ Mid 1970s Eagle golf cart made in Long Beach California by Lad Industries +++ All with Mercury hydraulic brakes.

Small Hole Copper Washer for Banjo Bolt on Master Cylinder on 1970 to 1980 Club Car electric Caroche model +++ Cushman Truckster and Titan models +++ Taylor-Dunn +++ 1974 to 1980 Elmco Royal Ride +++ 1974 to 1976 Pargo electric model 544 +++ Mid 1970s Eagle golf cart made in Long Beach California by Lad Industries +++ All with Mercury hydraulic brakes.

Three Port Banjo Fitting for Master Cylinder on Cushman Truckster and Titan models +++ NOTE: Will also work on 1974 to 1980 Elmco Royal Ride +++ 1974 to 1976 Pargo electric model 544 +++ Mid 1970s Eagle golf cart made in Long Beach California by Lad Industries +++ All with Mercury hydraulic brakes.

Single Port Banjo Fitting for Master Cylinder on Taylor-Dunn models with two wheel brakes +++ Can be used on many other master cylinders.

3/8"-24 thread Inverted Flare Plug for blocking off unused ports on master cylinder banjo fittings and other brake line fittings on Club Car, E-Z-GO, Cushman, Taylor-Dunn and others.

Large Black Head Aluminum Pop Rivet for securing Cowl to Instrument Panel on 1994-1/2 and newer E-Z-GO +++ Can be used on other carts and applications.

Bag Strap Aluminum Rivet for 1965 to 1994 Pre-Medalist/TXT E-Z-GO +++ Can be used on other carts and applications.

Retaining Ring for holding ramp plate to fixed face hub assembly on Salsbury/Comet style drive clutch used Melex gas models 512 and 625 +++ Also 1984 to 1987 Club Car DS model with 341cc KF-82 engine for serial number AG8414-53441 thru AG8801-13720 +++ Also for 1990 to 1995 Hyundai gas carts.

Straight Brass Fuel Fitting for carts with Kohler or Briggs and Stratton engines and others... Also used on 1961 to 1964 Cushman model 735 "Shark Nosed" Golfster... Also 1963 Scotsman series 736 and 737 with 5hp Briggs and Stratten... Also early Trucksters.

90 Degree Brass Fuel Fitting for carts with Kohler or Briggs and Stratton engines and others... Also used on 1961 to 1964 Cushman model 735 "Shark Nosed" Golfster... Also 1963 Scotsman series 736 and 737 with 5hp Briggs and Stratten... Also early Trucksters.

1/2"-20 Thin Nylock KingPpin Nut for late 1977 Harley Davidson model DE-40 after serial number 8D10057H7 +++ Also 1979 to 1982 model MGIV (Master Glide IV) +++ Also Nut for upper tie rod (ball joint) on 2014 Summit SP5, SU5, SU5-2

1"-14 Front Spindle Castle Nut for 2000 and newer Columbia Par Car Burden Carrier Payloader models BC2, BC3 and B4 +++ Front Spindle Castle Nut for 1978 to 1982 Nordskog model 262 and 264 Cargo Carrier and 1983 and newer Nordskog and US Electricar Legend models 280 and 282 series A,B,C and D +++ Also Front Spindle Nut for all 1965 to present E-Z-GO four wheel models..

3/16" x 1/2" x 5/8" Aluminum Large Head Blind Drive Rivet for attaching pedal pads on 1965 and newer E-Z-GO +++ Also Melex, Jacobsen, and Legend.

5/16"-24 SAE Fine Thread Nut for many applications on 1963 and newer Harley Davidson, Cushman, E-Z-GO, Taylor-Dunn and others.

Accelerator Pedal Return Spring for Cushman +++ Noland +++ Pargo +++ 3-7/8" Long.

1/2"-20 Castle Nut for Tie Rod End for 1969 to 1971 Taylor-Dunn models B, BN and M+++ 1972 to 1975 Taylor-Dunn Tee Bird models GT-360 and GT-361 +++1975 to 1985 Tee Bird models GT-370 and GT-371 +++ 1984 and newer Taylor-Dunn models B-248 and B-254 +++ 1989 and newer models B-660, B-661 and B-661E +++ Model R-380 electric and 1998 and newer gas model R-680 +++ Many other applications.

3/8"-16 Locking Whiz Type Flange Nut used on Brake Pedal Pivot Bolt on 1975 to 1994 E-Z-GO pre-Medalist models +++ Used on Shoulder Bolt on front of Rear Leaf Spring for all 1994 and newer E-Z-GO models +++ Many other carts and applications.

Accelerator Pedal and Brake Return Spring for 1954 to 1959 Cushman model 731-6 & later.

3/8"-16 Standard Course Thread Nut for many applications on 1963 and newer Harley Davidson +++ Also Club Car, Cushman, E-Z-GO, Legend, Pargo, Jacobsen, Taylor-Dunn and others.

1/4" Brass Washer for Speed Control Board on Cushman electric models 731, 732, Electric Deluxe models 881407, 881408, 881413 +++ Also Executive model 898322 and Titan models 898315 and 898316 and others +++ Used on foot switch on Gran Cushman Golfster models GC300 and GC400 +++ Used on Forward and Reverse Contact on many older Cushman golf carts such as Deluxe models 881407 and 881408.

5/16"-24 Nylock Nut used in various places on E-Z-GO, Legend, Harley Davidson and Columbia Par Car, Taylor-Dunn and many more.

Brass Brake Line T-fitting +++ Connects three 3/16" steel brake lines with 3/8"-24 threads to 3/8"-24 Inverted Flare female T-fitting +++ Used on Cushman +++ Taylor-Dunn +++ Columbia Par Car +++ And many others.

Aluminum Small Head Blind Drive Rivet for attaching pedal pads on 1965 and newer E-Z-GO +++ Also Jacobsen, and Legend.

Black Aluminum Pop Rivet used to secure fender caps, bag strap buckles and other trim on all years of E-Z-GO +++ Can be used on other carts and applications.

5/32" x 7/16" x .450" Black Aluminum Pop Rivet used on 1994-1/2 to 2018 gas and 36/48 volt electric E-Z-GO Medalist and TXT models on Cowl and elsewhere +++ Can be used on other carts and applications.

3/16" x 5/8" x 3/8" Black Aluminum Pop Rivet used to secure fender caps and other trim on all years of E-Z-GO +++ Can be used on other carts and applications.

7/16"-20 Thin Flex Lock Nut for Steering Pivot Pin on Taylor-Dunn model ET-150 and others.

3/16" x 9/16" x 5/8" Aluminum Rivet for 1994-1/2 and newer E-Z-GO gas and 36volt and 48 volt electric TXT, Medalist, RXV, ST Vehicles, Shuttles, Cushman, Express, Terrain, Woods MAV 350, MAV 480 +++ Can be used on other carts and applications.

3/16" x 5/16" x 5/8" Black Aluminum Rivet for 1996 and newer E-Z-GO gas and 36 volt and 48 volt electric TXT for attaching rear bumper +++ Can be used on other carts and applications.

3/16" x 5/8" x 3/8" Small Flange Aluminum Pop Rivet used to secure fender caps and other trim on all years of E-Z-GO +++ Can be used on other carts and applications.

3/16" x .70" x 5/8" Stainless Steel Pop Rivet for attaching Seat Hinge on 2001 and newer E-Z-GO models RXV, TXT, Cushman, Express, E-Z-GO Shuttle, Medalist, Terrain. +++ Can be used on other carts and applications.

5/32" x 9/16" x .470" Aluminum Pop Rivet used on 1994-1/2 to 2007 E-Z-GO Medalist, TXT, M5 & other models for attaching mat and elsewhere +++ Can be used on other carts and applications.

1/4"-20 Nylock Nut for many applications on Club Car, E-Z-GO, Harley Davidson, Columbia Par Car, Legend, Nordskog and many other carts +++ Can be used on battery hold down rods.

5/16" USS Steel Flat washer used in many applications on E-Z-GO, Club Car, Harley Davidson, Columbia Par Car and many other carts and applications.

1/2"-20 SAE Fine Thread Nut for rear shock bolt on 1966 to 1981 Harley Davidson and 1982 to 1988 Columbia Par Car +++ Many other applications on 1963 and newer Harley Davidson as well as Cushman, E-Z-GO, Taylor-Dunn and others.

Brass Brake Line T-fitting +++ Connects two 3/16" steel brake lines with 3/8"-24 threads to 1/8" female pipe thread for attaching stop light switch +++ Used on Cushman +++ Nordskog, Taylor-Dunn, Columbia Par Car +++ And many others.

Brass Brake Line T-fitting with Mounting Bracket +++ Connects three 3/16" steel brake lines with 3/8"-24 threaded male ends +++ Used on Cushman +++ E-Z-GO +++ Nordskog +++ And many others.

Stainless Steel Pop Rivet used on E-Z-GO Gas & Electric Vehicles in front/mid/rear body, body panels, DCS (Drive Control System) battery/connections, PDS (Precision Drive System) installs, front cowl and various other parts assemblies. +++ Can be used on other carts and applications.

1/8"-27 pipe thread Plug for blocking off unused ports on master cylinders and other brake line fittings on Club Car, E-Z-GO, Cushman, Taylor-Dunn and others.

1/4-20 x 1" Bolt for J Hook for Speed Control on Taylor-Dunn models SC and AN and others.

Woodruff Key for Motor Drive Sprocket on many Nordskog and Marketeer models.

14mm by 1.5 tpi Nut for Starter/Generator on 1969 to 1981 Harley Davidson and 1982 and newer Columbia Par Car +++Also fits all Bosch, Hitachi, Reliance and others used on E-Z-GO, Club Car, Hyundai, Melex and Yamaha.