5/8"-18 Thin Jam Nut on crankshaft to hold Primary Clutch on 1963 to 1981 Harley Davidson models D, DF, DC and D4 +++ Harley Davidson and Columbia Par Car Pitman Arm Retaining Nut +++ Steering wheel nut for Taylor-Dunn +++ Front Axle Nut for 1965 to 1984 Cushman 3 wheel Haulster and Truckster.

1"-14 Front Spindle Castle Nut for 2000 and newer Columbia Par Car Burden Carrier Payloader models BC2, BC3 and B4 +++ Front Spindle Castle Nut for 1978 to 1982 Nordskog model 262 and 264 Cargo Carrier and 1983 and newer Nordskog and US Electricar Legend models 280 and 282 series A,B,C and D +++ Also Front Spindle Nut for all 1965 to present E-Z-GO four wheel models..

1"-14 Thin Castle Nut for 1981 and newer E-Z-GO front spindle.

1/2" Split Lock Washer used in many applications on E-Z-GO, Club Car, Cushman, Harley Davidson, Columbia Par Car, Nordskog, Taylor-Dunn and many other carts and applications.

1/2"-20 Castle Nut for Tie Rod End for 1969 to 1971 Taylor-Dunn models B, BN and M+++ 1972 to 1975 Taylor-Dunn Tee Bird models GT-360 and GT-361 +++1975 to 1985 Tee Bird models GT-370 and GT-371 +++ 1984 and newer Taylor-Dunn models B-248 and B-254 +++ 1989 and newer models B-660, B-661 and B-661E +++ Model R-380 electric and 1998 and newer gas model R-680 +++ Many other applications.

1/2"-20 Left Hand Jam Nut for Tie Rod End on 1996 to 2012 Columbia Par Car Summit Utilitruck model SU5 & Expediter EX21 and other carts.

1/2"-20 Sway Bar Jam Nut for 1976 to 1978 Harley Davidson mode DE-40 and 1979 to 1982 model MG-IV +++ Steering Link Rod End Jam Nut for 1965 to 1974 Pargo three wheel cart +++ Also for 1980 and older Pargo model 873 and 1983 and newer model 830 beginning with serial # 8304311182 +++ Also Pargo model 813 and 815 +++ Also Westinghouse industrial models 253 and 254 +++ Tie Rod Jam Nut and Crankshaft Nut on some Cushman models.

1/2"-20 SAE Fine Thread Nut for rear shock bolt on 1966 to 1981 Harley Davidson and 1982 to 1988 Columbia Par Car +++ Many other applications on 1963 and newer Harley Davidson as well as Cushman, E-Z-GO, Taylor-Dunn and others.

King Pin Nut for 1981 and newer Club Car +++ Lower shock mount nut on 3 wheel E-Z-GO +++ Tie Rod End Nut on Columbia Par Car SU5 & Expediter EX21 +++ Rod End Nylock Nut for Stud End for 1965 to 1974 Pargo three wheel cart +++ For 1980 and older Pargo model 873 and 1983 and newer model 830 beginning with serial # 8304311182 +++ Pargo models 812, 813, 814 and 815.

1/2"-20 Thin Nylock KingPpin Nut for late 1977 Harley Davidson model DE-40 after serial number 8D10057H7 +++ Also 1979 to 1982 model MGIV (Master Glide IV) +++ Also Nut for upper tie rod (ball joint) on 2014 Summit SP5, SU5, SU5-2

1/4" Brass Washer for Speed Control Board on Cushman electric models 731, 732, Electric Deluxe models 881407, 881408, 881413 +++ Also Executive model 898322 and Titan models 898315 and 898316 and others +++ Used on foot switch on Gran Cushman Golfster models GC300 and GC400 +++ Used on Forward and Reverse Contact on many older Cushman golf carts such as Deluxe models 881407 and 881408.

1/4" Split Lock Washer used in many applications on E-Z-GO, Club Car, Cushman, Harley Davidson, Columbia Par Car, Nordskog, Taylor-Dunn and many other carts and applications.

5/32" x 7/16" x .450" Black Aluminum Pop Rivet used on 1994-1/2 to 2018 gas and 36/48 volt electric E-Z-GO Medalist and TXT models on Cowl and elsewhere +++ Can be used on other carts and applications.

Bag Strap Aluminum Rivet for 1965 to 1994 Pre-Medalist/TXT E-Z-GO +++ Can be used on other carts and applications.

1/4" x 13/16" x 11/16" Christmas Tree Style Push In Black Plastic Rivet for E-Z-GO, Club Car, Yamaha, Harley Davidson and Columbia Par Car and others.

1/4" x 13/16" x 11/16" Christmas Tree Style Push In Black Plastic Rivet for E-Z-GO, Club Car, Yamaha, Harley Davidson and Columbia Par Car and others.

Plastic Large Head for 1965 to 1994 E-Z-GO Pre Medalist Marathon model +++ Also Yamaha, Melex, Jacobsen, and Legend and others.

1/4"-20 Brass Nut for Speed Control Board on Cushman electric models 731, 732, Electric Deluxe models 881407, 881408, 881413 +++ Also Executive model 898322 and Titan models 898315 and 898316 and others +++ Also used on foot switch on Gran Cushman Golfster models GC300 and GC400 +++ Also used on Forward and Reverse Contact on many older Cushman golf carts such as Deluxe models 881407, 881408 +++ Also Nordskog.

1/4"-20 standard course thread Nut for many applications on 1963 and newer Harley Davidson. +++ Also Club Car, Cushman, E-Z-GO, Legend, Pargo, Jacobsen, Taylor-Dunn and others.

1/4"-20 Nylock Nut for many applications on Club Car, E-Z-GO, Harley Davidson, Columbia Par Car, Legend, Nordskog and many other carts +++ Can be used on battery hold down rods.

1/4"-28 Nut for many applications on 1963 and newer Harley Davidson, Cushman, E-Z-GO, Taylor-Dunn and others.

1/4"-28 Thin Nylock Nut for mounting Carburetor on 1963 to 1987 Harley Davidson with Tillotson carburetor +++ Many other applications.

1/4-20 x 1" Bolt for J Hook for Speed Control on Taylor-Dunn models SC and AN and others.

1/4"-20 x 1" Brass Screw for attaching Stationary Contact to Speed Control Board or Forward an Reverse Board on many Cushman electric models.

Stainless Steel Replacement Fillister Head OEM Style Crankcase Screw on 1963 to 1981 Harley Davidson models D, DF, DC and DF +++ Also Air Shroud Mounting Screw on 1963 to 1966 Harley Davidson models D and DF and 1963 to 1968 model DC +++ Many other applications.

1/4-20 x 1-1/4" Pan Head Screw used on 1976 to 1978 Harley Davidson model DE40 on top support +++ Many other applications.

Fillister Head OEM Crankcase Screw on 1963 to 1981 Harley Davidson models D, DF, DC and DF +++ Many other applications +++ Measures 1/4-20 x 2-1/4".

Stainless Steel Allen Head Replacement Crankcase Screw on 1963 to 1981 Harley Davidson models D, DF, DC and DF +++ Many other applications. +++ Measures 1/4-20 x 2-1/4".

1/4-20 x 3/4" Bolt for Taylor-Dunn Five Speed J Hook with 2 holes +++ Also for mounting Dual Cup Holder on 1993 and newer Club Car model DS +++ Also for mounting J Hook on mid 1970s Eagle golf cart made in Long Beach California by Lad Industries +++ Also for mounting solenoid on 1963 to 1993 pre-Medalist Speed Board +++ Also Speed Control on Harley Davidson DE-40.

Stainless Steel Body Support Reinforcement Screw used on 967 to 1981 Harley Davidson gas and electric models +++ Many other applications +++ 1/4-20 x 7/8"

Stainless Steel Allen Head Replacement Crankcase Screw on 1963 to 1981 Harley Davidson models D, DF, DC and DF +++ Also Air Shroud Mounting Screw on 1963 to 1966 Harley Davidson models D and DF and 1963 to 1968 model DC +++ Many other applications.

1/4-20x 11/16" Slotted Fillister Head Screw for Seat Hinge Mounting on 1967 to 1981 Harley Davidson model DEC +++ Solenoid Mounting Screw on 1963 to 1965 models DE, DEF and DEC +++ Many other applications.

10-24 by 1/4" thick by 3/8" hex Nylock Nut for many applications on 1963 and newer Harley Davidson and others

10-32 Nylock Nut used on 2008 and newer E-Z-GO RXV to hold ball stud on F&R linkage +++ Many other applications.

10mm Split Lock Washer also referred to as a Spring Washer used on Yamaha, Hyundai, Melex and many other carts and applications.

16M (5/8") Stainless External Tooth Serrated Lock Washer +++ Can be used in many applications on E-Z-GO, Club Car, Cushman, Harley Davidson, Columbia Par Car, Nordskog, Taylor-Dunn and many other carts and applications.

Aluminum Small Head Blind Drive Rivet for attaching pedal pads on 1965 and newer E-Z-GO +++ Also Jacobsen, and Legend.

3/16" x .70" x 5/8" Stainless Steel Pop Rivet for attaching Seat Hinge on 2001 and newer E-Z-GO models RXV, TXT, Cushman, Express, E-Z-GO Shuttle, Medalist, Terrain. +++ Can be used on other carts and applications.

Large Black Head Aluminum Pop Rivet for securing Cowl to Instrument Panel on 1994-1/2 and newer E-Z-GO +++ Can be used on other carts and applications.

3/16" x 1/2" x 5/8" Aluminum Large Head Blind Drive Rivet for attaching pedal pads on 1965 and newer E-Z-GO +++ Also Melex, Jacobsen, and Legend.

Black Aluminum Pop Rivet used to secure fender caps, bag strap buckles and other trim on all years of E-Z-GO +++ Can be used on other carts and applications.

3/16" x 5/16" x 5/8" Black Aluminum Rivet for 1996 and newer E-Z-GO gas and 36 volt and 48 volt electric TXT for attaching rear bumper +++ Can be used on other carts and applications.

3/16" x 5/8" x 3/8" Black Aluminum Pop Rivet used to secure fender caps and other trim on all years of E-Z-GO +++ Can be used on other carts and applications.

3/16" x 5/8" x 3/8" Small Flange Aluminum Pop Rivet used to secure fender caps and other trim on all years of E-Z-GO +++ Can be used on other carts and applications.

3/16" x 7/16" x 5/8" Large Black Head Pop Rivet for securing Fender Caps other trim on all years of E-Z-GO +++ Can be used on other carts and applications.

3/16" x 9/16" x 5/8" Aluminum Rivet for 1994-1/2 and newer E-Z-GO gas and 36volt and 48 volt electric TXT, Medalist, RXV, ST Vehicles, Shuttles, Cushman, Express, Terrain, Woods MAV 350, MAV 480 +++ Can be used on other carts and applications.

Slotted Castle Rear Axle Nut for 1991 and newer E-Z-GO with 4 cycle engine +++ 1996 and newer E-Z-GO Gas and Electric 4 and 6 Passenger Shuttle, ST Express, 875, 881, 950 +++ Cushman Truckster, Haulster and Titan Vehicles +++ Front Spindle Castle Nut for 1974 to 2003 Club Car gas and electric models +++ Front Spindle Nut for Taylor-Dunn model 248 and others +++ Front Axle nut on Marketeer "Lynx" model 427 golf cart +++ Motrec Front Spindle and Kingpin Nut on many models +++ Also for Shuttlecraft.

3/4"-16 Thin Jam Nut for Front Axle 1965 to 1993 E-Z-GO three wheel +++ Jam Nut on 1953 to 1967 Cushman 3 wheel +++ 1965 to 1984 Cushman 3 wheel Haulster and Truckster +++ Motrec steering wheel nut +++ Pargo and Legend three wheel front axle nut +++ Marketeer 3 wheel front axle jam nut +++ Motor Jam Nut for 15 tooth motor sprocket on Taylor-Dunn +++ Speed Control Bushing Nut on Harley Davidson, E-Z-GO, Legend, Jacobsen and Melex +++ Steering Box Jam Nut on Ross Steering Box on 1979 to 1983 Club Car.

3/8" Split Lock Washer used in many applications on E-Z-GO, Club Car, Cushman, Harley Davidson, Columbia Par Car, Nordskog, Taylor-Dunn and many other carts and applications.

3/8"-16 Locking Whiz Type Flange Nut used on Brake Pedal Pivot Bolt on 1975 to 1994 E-Z-GO pre-Medalist models +++ Used on Shoulder Bolt on front of Rear Leaf Spring for all 1994 and newer E-Z-GO models +++ Many other carts and applications.