|
1"-14 Thin Castle Nut for 1981 and newer E-Z-GO front spindle.
|
|
|
Clip for attaching either a Brake Hose or Brake cable to the frame of the vehicle. Used on Cushman, E-Z-GO, Jacobsen, Taylor-Dunn and Motrec brake hoses and on Nordskog and Columbia Par Car brake cables... Used on other carts as well.
Retail: |
$9.27 |
On Sale: |
$2.43 |
You Save: |
74% |
|
|
|
5/16"-18 Nylock Nut for Front and Rear Bumper on 1984 to 1992 Club Car model DS... Use with mounting bolt number BD44-271 and BD44-362. Two each required... Also for Brake Linkage on Nordskog and many other carts
|
|
|
Red Polyurethane performance upgrade Bushing for Shock Absorber and Engine Stabilizer 1967 to 1997 Harley Davidson and Columbia Par Car... Also upper shock bushing on 1971 to 1994 E-Z-GO Marathon 2 cycle gas and 1991 to 1994, 4 cycle gas... Also lower shock mount busing on Melex 3 wheel model 102... Also other shocks with 5/8" shock bushings.
|
|
|
3/4"-16 Thin Jam Nut for Front Axle on 1965 to 1993 E-Z-GO three wheel Marathon models... Also Jam Nut for locking front axle bearing adjusting nut on 1953 to 1967 Cushman 3 wheel series 730, 731, 732, 733 Golfster and Miute Miser... Also 1965 to 1984 Cushman 3 wheel Haulster and Truckster... Also Motrec steering wheel nut... Also Pargo and Legend three wheel front axle nut... Also Marketeer model 425 golf cart and Westinghouse model 531 Errand Master and 539 Chariot front axle jam nut... Also Motor Jam Nut for 15 tooth motor sprocket on Taylor-Dunn... Also Speed Control Bushing Nut on Harley Davidson, E-Z-GO, Legend, Jacobsen and Melex... Also Steering Box Jam Nut on Ross Steering Box on 1979 to 1983 Club Car.
|
|
|
Replacement Accelerator Ball Joint and Stud for 1976 to 1994 E-Z-GO Pre Medalist Marathon X440 and X444 models.
|
|
|
1/4"-20 standard course thread Nut for many applications on 1963 and newer Harley Davidson... Also Club Car, Cushman, E-Z-GO, Legend, Pargo, Jacobsen, Taylor-Dunn and others.
|
|
|
Motor Sprocket Woodruff Key for 1970 to 1972 Taylor-Dunn GT338 and GT348... Also 1971 to 1979 models B, BN and M... Also 1972 to 1975 models GT-360 and GT 370... Also 1975 to 1985 GT-371 and GT-372... Also 1990s 48 volt Taylor Truck model B and electric model R-380.
|
|
|
Banjo Bolt Fitting with 1/8" pipe threads for stop light switch for BK44-590 Master Cylinder used on 1970 to 1980 Club Car electric Caroche model... Also 1974 to 1980 Elmco Royal Ride... Also1974 to 1976 Pargo electric model 544... Also mid 1970s Eagle golf cart made in Long Beach California by Lad Industries. All above carts with Mercury hydraulic brakes.
NOTE: Has 1/2"-20 male threads with 1/8" (.120" by 27 tpi) internal pipe threads.
|
|
|
Large Hole Copper Washer for Banjo Bolt on Master Cylinder on 1970 to 1980 Club Car electric Caroche model... Also Cushman Truckster and Titan models... Also Taylor-Dunn... Also 1974 to 1980 Elmco Royal Ride... Also1974 to 1976 Pargo electric model 544... Also mid 1970s Eagle golf cart made in Long Beach California by Lad Industries. All above carts with Mercury hydraulic brakes.
|
|
|
Small Hole Copper Washer for Banjo Bolt on Master Cylinder on 1970 to 1980 Club Car electric Caroche model... Also Cushman Truckster and Titan models... Also Taylor-Dunn... Also 1974 to 1980 Elmco Royal Ride... Also1974 to 1976 Pargo electric model 544... Also mid 1970s Eagle golf cart made in Long Beach California by Lad Industries. All above carts with Mercury hydraulic brakes.
|
|
|
Three Port Banjo Fitting for Master Cylinder on Cushman Truckster and Titan models.
NOTE: Will also work on 1974 to 1980 Elmco Royal Ride... Also1974 to 1976 Pargo electric model 544... Also mid 1970s Eagle golf cart made in Long Beach California by Lad Industries. All above carts with Mercury hydraulic brakes.
|
|
|
Single Port Banjo Fitting for Master Cylinder on Taylor-Dunn models with two wheel brakes... Can be used on many other master cylinders.
|
|
|
3/8"-24 thread Inverted Flare Plug for blocking off unused ports on master cylinder banjo fittings and other brake line fittings on Club Car, Cushman, Taylor-Dunn and others.
|
|
|
1/4"-20 x 1" Brass Screw for attaching Stationary Contact to Speed Control Board or Forward an Reverse Board on many Cushman electric models.
|
|
|
Large Black Head Aluminum Pop Rivet for securing Cowl to Instrument Panel on 1994-1/2 and newer E-Z-GO... Can be used on other carts and applications.
|
|
|
Bag Strap Aluminum Rivet for 1965 to 1994 Pre-Medalist/TXT E-Z-GO... Can be used on other carts and applications.
Retail: |
$1.87 |
On Sale: |
$0.97 |
You Save: |
49% |
|
|
|
Retaining Ring for holding ramp plate to fixed face hub assembly on Salsbury/Comet style drive clutch used Melex gas models 512 and 625... Also 1984 to 1987 Club Car DS model with 341cc KF-82 engine for serial number AG8414-53441 thru AG8801-13720... Also 1990 to 1995 Hyundai gas carts.
|
|
|
1/4"-28 Thin Nylock Nut for mounting Carburetor on 1963 to 1987 Harley Davidson with Tillotson carburetor... Many other apllications.
|
|
|
Straight Brass Fuel Fitting for carts with Kohler or Briggs and Stratton engines and others... Also used on 1961 to 1964 Cushman model 735 "Shark Nosed" Golfster... Also 1963 Scotsman series 736 and 737 with 5hp Briggs and Stratten... Also early Trucksters.
|
|
|
90 Degree Brass Fuel Fitting for carts with Kohler or Briggs and Stratton engines and others... Also used on 1961 to 1964 Cushman model 735 "Shark Nosed" Golfster... Also 1963 Scotsman series 736 and 737 with 5hp Briggs and Stratten... Also early Trucksters.
|
|
|
Woodruff Key for Motor Drive Sprocket on many Nordskog and Marketeer models.
|
|
|
1/2"-20 Thin Nylock KingPpin Nut for late 1977 Harley Davidson model DE-40 after serial number 8D10057H7... Also 1979 to 1982 model MGIV (Master Glide IV).
|
|
|
1"-14 Front Spindle Castle Nut for 2000 and newer Columbia Par Car Burden Carrier Payloader models BC2, BC3 and B4... Also Front Spindle Castle Nut for 1978 to 1982 Nordskog model 262 and 264 Cargo Carrier and 1983 and newer Nordskog and US Electricar Legend models 280 and 282 series A,B,C and D... Also Front Spindle Nut for all 1965 to present E-Z-GO four wheel models..
Retail: |
$5.41 |
On Sale: |
$3.32 |
You Save: |
39% |
|
|
|
Aluminum Large Head Blind Drive Rivet for attaching pedal pads on 1965 and newer E-Z-GO... Also Melex, Jacobsen, and Legend.
|
|
|
5/16"-24 SAE Fine Thread Nut for many applications on 1963 and newer Harley Davidson, Cushman, E-Z-GO, Taylor-Dunn and others.
|
|
|
Accelerator Pedal Return Spring for Cushman, Noland and Pargo.
Retail: |
$7.98 |
On Sale: |
$3.87 |
You Save: |
52% |
|
|
|
3/8" by 3/4" Brake Cable Clevis Pin for Taylor-Dunn and others... 1/2" usable area.
|
|
|
5/16" by 1-1/8" Brake Cable Clevis Pin for Taylor-Dunn and others... 7/8" usable area.
|
|
|
3/8" by 1" Brake Cable Clevis Pin for Taylor-Dunn and others... 7/8" usable area.
|
|
|
1/2"-20 Castle Nut for Tie Rod End for 1969 to 1971 Taylor-Dunn models B, BN and M... Also 1972 to 1975 Taylor-Dunn Tee Bird models GT-360 and GT-361... Also 1975 to 1985 Tee Bird models GT-370 and GT-371... Also 1984 and newer Taylor-Dunn models B-248 and B-254... Also 1989 and newer models B-660, B-661 and B-661E and others... Also model R-380 electric and 1998 and newer gas model R-680... Many other applications.
|
|
|
3/8"-16 Locking Whiz Type Flange Nut used on Brake Pedal Pivot Bolt on 1975 to 1994 E-Z-GO pre-Medalist models... Also used on Shoulder Bolt on front of Rear Leaf Spring for all 1994 and newer E-Z-GO models... Many other carts and applications.
Retail: |
$2.29 |
On Sale: |
$1.77 |
You Save: |
23% |
|
|
|
Accelerator Pedal and Brake Return Spring for 1954 to 1959 Cushman model 731-6 & later.
|
|
|
3/8"-16 Standard Course Thread Nut for many applications on 1963 and newer Harley Davidson... Also Club Car, Cushman, E-Z-GO, Legend, Pargo, Jacobsen, Taylor-Dunn and others.
|
|
|
3/8" by 1-5/16" Brake Cable Clevis Pin for 2003 and newer Club Car model DS... Also model XRT800 and XRT810 Utility carts... Also 2005 and newer gas models XRT1200 and XRT1200SE, ... 1" usable area.
Retail: |
$3.35 |
On Sale: |
$2.73 |
You Save: |
19% |
|
|
|
1/4" Brass Washer Speed Control Board on Cushman electric models 731, 732, Electric Deluxe models 881407, 881408, 881413... Also Executive model 898322 and Titan models 898315 and 898316 and others... Also used on foot switch on Gran Cushman Golfster models GC300 and GC400... Also used on Forward and Reverse Contact on many older Cushman golf carts such as Deluxe models 881407, 881408.
|
|
|
1/4"-20 Brass Nut for Speed Control Board on Cushman electric models 731, 732, Electric Deluxe models 881407, 881408, 881413... Also Executive model 898322 and Titan models 898315 and 898316 and others... Also used on foot switch on Gran Cushman Golfster models GC300 and GC400... Also used on Forward and Reverse Contact on many older Cushman golf carts such as Deluxe models 881407, 881408... Also Nordskog.
|
|
|
5/16"-24 Nylock Nut used in various places on E-Z-GO, Legend, Harley Davidson and Columbia Par Car, Taylor-Dunn and many more.
|
|
|
1/2"-20 Left Hand Jam Nut for Tie Rod End on 1996 to 2012 Columbia Par Car Summit Utilitruck model SU5 & Expediter EX21 and other carts.
|
|
|
Brass Brake Line T-fitting... Connects three 3/16" steel brake lines with 3/8"-24 threads to 3/8"-24 Inverted Flare female T-fitting... Used on Cushman Taylor-Dunn, Columbia Par Car and many others.
|
|
|
Aluminum Small Head Blind Drive Rivet for attaching pedal pads on 1965 and newer E-Z-GO... Also Jacobsen, and Legend.
Retail: |
$0.95 |
On Sale: |
$0.59 |
You Save: |
38% |
|
|
|
Black Aluminum Pop Rivet used to secure fender caps and other trim on all years of E-Z-GO... Can be used on other carts and applications.
|
|
|
5/32" x 7/16" x .450" Black Aluminum Pop Rivet used on 1994-1/2 to 2018 gas and 36/48 volt electric E-Z-GO Medalist and TXT models on Cowl and elsewhere... Can be used on other carts and applications.
|
|
|
Black Aluminum Pop Rivet used to secure fender caps and other trim on all years of E-Z-GO... Can be used on other carts and applications.
|
|
|
7/16"-20 Thin Flex Lock Nut for Steering Pivot Pin on Taylor-Dunn model ET-150 and others.
|
|
|
Long Brake Hose Clip for attaching Brake Hose to the frame of the vehicle... Also used on other carts.
|
|
|
Aluminum Rivet for 1994-1/2 and newer E-Z-GO gas and 36volt and 48 volt electric TXT, Medalist, RXV, ST Vehicles, Shuttles, Cushman, Express, Terrain, Woods MAV 350, MAV 480... Can be used on other carts and applications.
Retail: |
$1.31 |
On Sale: |
$0.79 |
You Save: |
40% |
|
|
|
Black Aluminum Rivet for 1996 and newer E-Z-GO gas and 36 volt and 48 volt electric TXT for attaching rear bumper... Can be used on other carts and applications.
Retail: |
$1.31 |
On Sale: |
$0.79 |
You Save: |
40% |
|
|
|
3/16" x 5/8" x 3/8" Small Flange Aluminum Pop Rivet used to secure fender caps and other trim on all years of E-Z-GO... Can be used on other carts and applications.
|
|
|
Stainless Steel Pop Rivet for attaching Seat Hinge on 2001 and newer E-Z-GO models RXV, TXT, Cushman, Express, E-Z-GO Shuttle, Medalist, Terrain... Can be used on other carts and applications.
Retail: |
$2.16 |
On Sale: |
$1.67 |
You Save: |
23% |
|
|