|
NONE CURRENTLY AVAILABLE +++ Crankcase for 1985 to 1988 Yamaha G2 with J38 four cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine +++ NOTE: Special order item, Allow one to two weeks before shipping.
|
|
|
Crankshaft for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
Connecting Rod for 1985 to 1996 Yamaha G2, G8, G9, G11 and G14 with 4 cycle engine +++ 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
Genuine Yamaha Factory OEM Standard Piston Assembly with Rings, Pin and Keepers for 1985 to 1995 Yamaha G2, G5, G8, G9 and G11 with four cycle engines +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
ON NATIONWAIDE BACK ORDER FROM YAMAHA +++ No Forecast for when available +++ Genuine Yamaha Factory OEM .25mm (.010") Over Piston Assembly with Rings, Pin and Keepers for 1985 to 1994 Yamaha G2, G5, G8, G9 and G11 with four cycle engines +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
ON NATIONWIDE BACK ORDER FROM YAMAHA +++ Genuine Yamaha Factory OEM .50mm (.020") Over Piston Assembly with Rings, Pin and Keepers for 1985 to 1994 Yamaha G2, G5, G8, G9 and G11 with four cycle engines & G11 until 1995 +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
Exhaust Valve for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
Standard Piston Ring Set for 1985 to 1995 Yamaha G2, G5, G8, G9 and G11 with four cycle engines +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
.25mm (.010") Oversize Piston Ring Set for 1985 to 2001 Yamaha G2, G5, G8, G9 and G11 with four cycle engines +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
.50mm (.020") Oversize Piston Ring Set for 1985 to 2001 Yamaha G2, G5, G8, G9 and G11 with four cycle engines +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
NOW AVAILABLE +++ Push Rod for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
Now Available +++ Rear Motor Mount for 1985 to 1996 Yamaha models G2, G5, G8, G9, G11 and G14 +++ Also 1990 to 1995 Hyundai +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
Intake Valve for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
Crankshaft Bearing for 1984 to 1991 Club Car with 341 cc Engine +++ Also Clutch Side Crankshaft Bearing for 1978 to 1996 Yamaha models G1, G2, G3, G5, G8, G9 and G14 +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
Retail: |
$42.95 |
On Sale: |
$29.36 |
You Save: |
32% |
|
|
|
Fan Side Crankshaft Bearing for 1982 to 2002 Yamaha G2, G5, G8, G9, G11, G14, G16, and G20 +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
Retail: |
$32.95 |
On Sale: |
$23.78 |
You Save: |
28% |
|
|
|
Oil Tank Filler Cap for 1985 to 1996 Yamaha G2, G5, G8, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
Connecting Rod Bolt for 1985 to 1996 Yamaha G2, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine. NLA
|
|
|
Oil Splasher for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
Head Gasket for 1985 to 1994 Yamaha G2, G5, G8, G9, and G11 with four cycle engines J38, JA2, J42, J50, J55, JF2, JG5, JJ3 +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
Four Feet of nylon reinforced 1/4" Fuel Line for many carts.
|
|
|
Clutch Side Crankshaft Seal for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
Balance Shaft Collar for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
Intake Valve Stem Seal for 1982 and newer Yamaha models G2, G5, G8, G9, G11, G16, G20, G21, G22, G23, G27 and G28 and 2007 and newer model YDR, "The Drive" with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
Crankshaft Seal for 1982 to 2002 Yamaha G2, G5, G8, G9, G11, G14 fan side only and both sides on 1996 to 2004 models G16, G20 and G21 +++ All with 4 cycle engine +++ Also for 1986 to 1997 Taylor Dunn model R-680 engine.
Retail: |
$12.99 |
On Sale: |
$9.76 |
You Save: |
25% |
|
|
|
Valve Spring Retainer for All 1985 and newer Yamaha golf carts with 4 cycle engines, G2 through G29 YDRA "The Drive" +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
Exhaust Gasket for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
Valve Keeper Cotter for All 1985 and newer Yamaha golf carts with 4 cycle engines, G2 through G29 YDRA "The Drive" +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
1/4" inline fuel filter for most carts.
|
|
|
2" Hose Clamp for air hose on many carts.
|
|
|
Valve Cover gasket for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with four cycle engines +++ Also for 1986 to 1997 Taylor Dunn model R-680 engine.
|
|
|
Oil Drain Plug Gasket for 1985 to 2009 Yamaha G2, G5, G8, G9, G11, G14, G16, G20, G21, G22, G27 and G28 +++ Also 2007 and newer model YDRA "The Drive". All with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
Retail: |
$9.99 |
On Sale: |
$5.93 |
You Save: |
41% |
|
|
|
Carburetor Base Gasket for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 +++ Also 1986 to 1997 Taylor-Dunn model R-680 truck.
|
|
|
Fuel Filter for 1984 and newer Club Car DS and Precedent +++ 1994 and newer E-Z-GO 4 cycle +++ Yamaha G14-G22 +++ Also Melex +++ Fits most golf cars that use 1/4" or 5/16" I.D. tubing.
|
|
|
Manifold Gasket for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 +++ Also 1986 to 1997 Taylor-Dunn model R-680 truck.
Retail: |
$7.49 |
On Sale: |
$5.96 |
You Save: |
21% |
|
|
|
Replacement 90 degree Fuel Filter for 1990 to 1995 Hyundai with 8mm inlet and outlet
|
|
|
Squeeze Type 1/4" Hose Clamp.
|
|
|
Valve Spring for All 1985 and newer Yamaha golf carts with 4 cycle engines, G2 through G29 YDRA "The Drive" +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
CURRENTLY ON BO until end of August +++ Vacuum Control Valve for 1985 to 1995 Yamaha G2, G5, G8, G9 and G11 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
Rocker Arm Support for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ As well as 1986 to 1997 Taylor-Dunn model R-680 engine
|
|
|
Rocker Arm Shaft for 1985 to 2011 Yamaha G2, G5, G8, G9, G11, G14, G16, G20, G21, G22, G23, G27, G28 and G29 YDRA "The Drive" with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
CURRENTLY ON BACK ORDER +++ Rocker Arm for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
Valve Lifter for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
Standard (Brown) Rod Bearing Set for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine. ON BACKORDER
|
|
|
NO LONGER AVAILABLE +++ .0001" (.025mm) Oversize (Black) Rod Bearing Set for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine... Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
NO LONGER AVAILABLE +++ .0002" (.050mm) Oversize (Blue) Rod Bearing Set for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
Wrist Pin for 1989 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
Retail: |
$30.95 |
On Sale: |
$18.73 |
You Save: |
40% |
|
|
|
Wrist Pin Keeper for 1989 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
5/16" Steel Fuel Filter for Cushman, Yamaha and Taylor-Dunn +++ Fits most golf cars that use 5/16" I.D. fuel line hose.
Retail: |
$6.85 |
On Sale: |
$5.86 |
You Save: |
15% |
|
|
|
Rocker Arm Adjusting Nut for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
Gasket for Air Cleaner Case (Air Box) for 1985 to 1995 Yamaha models G2, G5, G8, G9 and G11 +++ Also 1986 to 1997 Taylor-Dunn model R-680 truck.
|
|