1"-14 Thin Castle Nut for 1981 and newer E-Z-GO front spindle.

5/16"-18 Nylock Nut for Front and Rear Bumper on 1984 to 1992 Club Car model DS +++ Use with mounting bolt number BD44-271 and BD44-362. Two each required +++ Also for Brake Linkage on Nordskog and many other carts +++ Can be used on battery hold down rods.

Accelerator Cable Clevis Pin for 1979 and newer Yamaha gas models G1, G2, G3, G5, G8, G9, G11, G14, G16, G19, G20, G21, G22, G23, G27, G28, and model YDR "The Drive" +++ Also 1986 to 1997 Taylor-Dunn model R-680 truck +++ Has 6mm of usable length.

Hairpin Style Clip for Accelerator Cable Clevis Pin for 1979 to 2009 Yamaha gas models G1, G2, G3, G5, G8, G9, G11, G14, G16, G19, G20, G21, G22, G23, G27, G28 +++ Also 2007 and newer Yamaha model YDR, "The Drive" +++ Also 1986 to 1997 Taylor-Dunn model R-680 truck +++ Many other applications.

Valve Spring for All 1985 and newer Yamaha golf carts with 4 cycle engines, G2 through G29 YDRA "The Drive" +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.

Keps Style Resistor Mounting Nut for 1974 and newer Taylor-Dunn model SS-534 Step Saver +++ Also GT-360 and GT-370 speed control board and others.

1/4"-20 standard course thread Nut for many applications on 1963 and newer Harley Davidson. +++ Also Club Car, Cushman, E-Z-GO, Legend, Pargo, Jacobsen, Taylor-Dunn and others.

Motor Sprocket Woodruff Key for 1970 to 1972 Taylor-Dunn GT338 and GT348 +++ 1971 to 1979 models B, BN and M +++ 1972 to 1975 models GT-360 and GT 370 +++ 1975 to 1985 GT-371 and GT-372 +++ 1990s 48 volt Taylor Truck model B and electric model R-380.

Two Port Banjo Fitting for Master Cylinder on 1970 to 1980 Club Car electric Caroche model +++ Cushman Truckster and Titan models +++ Taylor-Dunn with 4 wheel brakes +++ 1974 to 1980 Elmco Royal Rid +++ Mid 1970s Eagle golf cart made in Long Beach California by Lad Industries +++ All with Mercury hydraulic brakes.

Banjo Bolt Fitting for Master Cylinder on 1970 to 1980 Club Car electric Caroche model +++ Also Taylor-Dunn +++ Also 1974 to 1980 Elmco Royal Ride +++ Also mid 1970s Eagle golf cart made in Long Beach California by Lad Industries +++ All above carts with Mercury hydraulic brakes.

Banjo Bolt Fitting with 1/8" pipe threads for stop light switch for BK44-590 Master Cylinder used on 1970 to 1980 Club Car electric Caroche model... +++ 1974 to 1980 Elmco Royal Ride +++ 1974 to 1976 Pargo electric model 544 +++ Mid 1970s Eagle golf cart made in Long Beach California by Lad Industries +++ All above carts +++ NOTE: Has 1/2"-20 male threads with 1/8" (.120" by 27 tpi) internal pipe threads.

Large Hole Copper Washer for Banjo Bolt on Master Cylinder on 1970 to 1980 Club Car electric Caroche model +++ Cushman Truckster and Titan models +++ Taylor-Dunn +++ 1974 to 1980 Elmco Royal Ride +++ 1974 to 1976 Pargo electric model 544 +++ Mid 1970s Eagle golf cart made in Long Beach California by Lad Industries +++ All with Mercury hydraulic brakes.

Single Port Banjo Fitting for Master Cylinder on Taylor-Dunn models with two wheel brakes +++ Can be used on many other master cylinders.

3/8"-24 thread Inverted Flare Plug for blocking off unused ports on master cylinder banjo fittings and other brake line fittings on Club Car, E-Z-GO, Cushman, Taylor-Dunn and others.

Pinion Nut for Taylor-Dunn with Ford 9" differential.

5/16" x 3/4" Brake Cable Clevis Pin for all Yamaha models G1-G28 +++ Has 7/16" usable length.

Large Black Head Aluminum Pop Rivet for securing Cowl to Instrument Panel on 1994-1/2 and newer E-Z-GO +++ Can be used on other carts and applications.

Bag Strap Aluminum Rivet for 1965 to 1994 Pre-Medalist/TXT E-Z-GO +++ Can be used on other carts and applications.

12mm-1.75 Slotted Castle Type Nut for Upper King Pin on ALL Melex four wheel models 102, 212, 252, 412, 512, 625, 663F2H, 666F2H and 667F2H +++ Also 1999 Taylor-Dunn model ER-200 Rover.

Upper Brake Return Spring for Taylor-Dunn model R-249 Tug and Taylor Truck with GT Drive System with Dana 60 axle with 12" by 2.5" brake shoes.

1/2"-20 Thin Nylock KingPpin Nut for late 1977 Harley Davidson model DE-40 after serial number 8D10057H7 +++ Also 1979 to 1982 model MGIV (Master Glide IV) +++ Also Nut for upper tie rod (ball joint) on 2014 Summit SP5, SU5, SU5-2

1"-14 Front Spindle Castle Nut for 2000 and newer Columbia Par Car Burden Carrier Payloader models BC2, BC3 and B4 +++ Front Spindle Castle Nut for 1978 to 1982 Nordskog model 262 and 264 Cargo Carrier and 1983 and newer Nordskog and US Electricar Legend models 280 and 282 series A,B,C and D +++ Also Front Spindle Nut for all 1965 to present E-Z-GO four wheel models..

3/16" x 1/2" x 5/8" Aluminum Large Head Blind Drive Rivet for attaching pedal pads on 1965 and newer E-Z-GO +++ Also Melex, Jacobsen, and Legend.

5/16"-24 SAE Fine Thread Nut for many applications on 1963 and newer Harley Davidson, Cushman, E-Z-GO, Taylor-Dunn and others.

Front Fork Spring for 1967 to 1974 Taylor-Dunn models SS-534 from serial number 10465 and up +++ Model SS-536 from serial number 90400 and up +++ MX-600 from 113227 and up.

King Pin Bushing for Taylor-Dunn model BG-150.

Lower Brake Return Spring for Taylor-Dunn model R-249 Tug and Taylor Truck with GT Drive System with Dana 60 axle with 12" by 2.5" brake shoes.

Brake Shoe Hold Down Spring for Taylor-Dunn model R-249 Tug and Taylor Truck with GT Drive System with Dana 60 axle with 12" by 2.5" brake shoes.

Brake Shoe Hold Down Pin for Taylor-Dunn model R-249 Tug and Taylor Truck with GT Drive System with Dana 60 axle with 12" by 2.5" brake shoes.

1/2"-20 Castle Nut for Tie Rod End for 1969 to 1971 Taylor-Dunn models B, BN and M+++ 1972 to 1975 Taylor-Dunn Tee Bird models GT-360 and GT-361 +++1975 to 1985 Tee Bird models GT-370 and GT-371 +++ 1984 and newer Taylor-Dunn models B-248 and B-254 +++ 1989 and newer models B-660, B-661 and B-661E +++ Model R-380 electric and 1998 and newer gas model R-680 +++ Many other applications.

3/8"-16 Locking Whiz Type Flange Nut used on Brake Pedal Pivot Bolt on 1975 to 1994 E-Z-GO pre-Medalist models +++ Used on Shoulder Bolt on front of Rear Leaf Spring for all 1994 and newer E-Z-GO models +++ Many other carts and applications.

Throttle Shaft Bushing for 1979 to 2008 Yamaha gas models G1 through G28 +++ Also 1986 to 1997 Taylor-Dunn model R-680 truck.

3/8"-16 Standard Course Thread Nut for many applications on 1963 and newer Harley Davidson +++ Also Club Car, Cushman, E-Z-GO, Legend, Pargo, Jacobsen, Taylor-Dunn and others.

19mm-1.5mm Spindle Castle Nut for Melex models 512 and 625 +++ Also 1999 Taylor-Dunn model ER-200 Rover.

1/4" Brass Washer for Speed Control Board on Cushman electric models 731, 732, Electric Deluxe models 881407, 881408, 881413 +++ Also Executive model 898322 and Titan models 898315 and 898316 and others +++ Used on foot switch on Gran Cushman Golfster models GC300 and GC400 +++ Used on Forward and Reverse Contact on many older Cushman golf carts such as Deluxe models 881407 and 881408.

5/16"-24 Nylock Nut used in various places on E-Z-GO, Legend, Harley Davidson and Columbia Par Car, Taylor-Dunn and many more.

Brass Brake Line T-fitting +++ Connects three 3/16" steel brake lines with 3/8"-24 threads to 3/8"-24 Inverted Flare female T-fitting +++ Used on Cushman +++ Taylor-Dunn +++ Columbia Par Car +++ And many others.

Aluminum Small Head Blind Drive Rivet for attaching pedal pads on 1965 and newer E-Z-GO +++ Also Jacobsen, and Legend.

Black Aluminum Pop Rivet used to secure fender caps, bag strap buckles and other trim on all years of E-Z-GO +++ Can be used on other carts and applications.

5/32" x 7/16" x .450" Black Aluminum Pop Rivet used on 1994-1/2 to 2018 gas and 36/48 volt electric E-Z-GO Medalist and TXT models on Cowl and elsewhere +++ Can be used on other carts and applications.

3/16" x 5/8" x 3/8" Black Aluminum Pop Rivet used to secure fender caps and other trim on all years of E-Z-GO +++ Can be used on other carts and applications.

7/16"-20 Thin Flex Lock Nut for Steering Pivot Pin on Taylor-Dunn model ET-150 and others.

Rocker Arm Adjusting Nut for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.

3/16" x 9/16" x 5/8" Aluminum Rivet for 1994-1/2 and newer E-Z-GO gas and 36volt and 48 volt electric TXT, Medalist, RXV, ST Vehicles, Shuttles, Cushman, Express, Terrain, Woods MAV 350, MAV 480 +++ Can be used on other carts and applications.

3/16" x 5/16" x 5/8" Black Aluminum Rivet for 1996 and newer E-Z-GO gas and 36 volt and 48 volt electric TXT for attaching rear bumper +++ Can be used on other carts and applications.

3/16" x 5/8" x 3/8" Small Flange Aluminum Pop Rivet used to secure fender caps and other trim on all years of E-Z-GO +++ Can be used on other carts and applications.

3/16" x .70" x 5/8" Stainless Steel Pop Rivet for attaching Seat Hinge on 2001 and newer E-Z-GO models RXV, TXT, Cushman, Express, E-Z-GO Shuttle, Medalist, Terrain. +++ Can be used on other carts and applications.

5/32" x 9/16" x .470" Aluminum Pop Rivet used on 1994-1/2 to 2007 E-Z-GO Medalist, TXT, M5 & other models for attaching mat and elsewhere +++ Can be used on other carts and applications.

Rear Spring for 1995 and newer Taylor-Dunn G-150 model +++ From serial number 114806 and up.

1/4"-20 Nylock Nut for many applications on Club Car, E-Z-GO, Harley Davidson, Columbia Par Car, Legend, Nordskog and many other carts +++ Can be used on battery hold down rods.