|
Motor Sprocket Woodruff Key for 1970 to 1972 Taylor-Dunn GT338 and GT348 +++ 1971 to 1979 models B, BN and M +++ 1972 to 1975 models GT-360 and GT 370 +++ 1975 to 1985 GT-371 and GT-372 +++ 1990s 48 volt Taylor Truck model B and electric model R-380.
|
|
|
NO LONGER AVAILABLE +++ Screw On Motor Repair Stud for repairing broken field coil studs on GE Motors... 5/16" by 18 coarse thread.
|
|
|
Rear Axle and Motor Bearing for Club Car +++ Columbia Par Car +++ Cushman +++ E-Z-GO +++ Harley Davidson +++ Noland +++ Nordskog, Pargo +++ Yamaha +++ and Taylor-Dunn
Retail: |
$22.99 |
On Sale: |
$12.63 |
You Save: |
46% |
|
|
|
Large O-Ring Motor Seal for Taylor-Dunn... Seals chain drive case from motor.
|
|
|
Seal for Taylor-Dunn with Old Style GE motor with pull type brush springs... Also for new style GE "Tin Can" style motor... Also Taylor-Dunn and Baldor motor.
|
|
|
Motor Seal for Taylor-Dunn with 3.5hp GE motor number 5BC49JB399C +++ Also for Talyor-Dunn motor number 70-054-00.
|
|
|
G.E. Motor Insulating Bushing Kit for G.E. 58 or 59 JBS "Tin Can" Style Motor used on 1994 and newer Club Cars +++ 1993 to 2001 Cushman Minute Miser and other models with 58JBS or 59JBS GE motor +++ Newer Columbia Par Car +++ Also E-Z-GO +++ Yamaha G8 to G22 models and 2003 to 2014 G22, G23, G27 and YDRE "The Drive with GE motor +++ Taylor-Dunn model B1-50.
Retail: |
$47.95 |
On Sale: |
$29.32 |
You Save: |
39% |
|
|
|
19 Spline Motor Coupler for repairing stripped splines on 1988 to 1996 E-Z-GO +++ 1990 to 1998 Columbia Par Car +++ 1990 to 2002 Yamaha 36 volt models G8, G9, G14 and G16 +++ Also Melex with 19 spline GE motors.
|
|
|
G.E. Motor Insulating Bushing Kit for G.E. Motor with Square Insulating Bushing for old style GE Motors used on Harley Davidson +++ Also 1984 to 1993 Club Car +++ Also Cushman, E-Z-GO, Davis, Noland, and others.
|
|
|
Sealed Drive End Motor Bearing for Taylor-Dunn and Yamaha with G.E. Motor.
Retail: |
$31.53 |
On Sale: |
$19.43 |
You Save: |
39% |
|
|
|
Electric Motor Bearing on Harley Davidson +++ E-Z-GO +++ Club Car +++ Cushman +++ Taylor-Dunn +++ Nordskog +++ Yamaha and others with General Electric, Baldor or Hitachi motors.
|
|
|
Drive End Bearing on 1968 to 1974 Gran Cushman Golfster electric models GC300 and GC400 and others... Also Taylor-Dunn.
|
|
|
Intermediate Gear O-Ring for electric Dana differential on 1988 & newer E-Z-GO +++ 1990 to 2013 Columbia Par Car +++ 2006 & newer Cushman Titan, 1986 & newer Melex +++ 1990 to 1995 Hyundai +++ 1998 &newer Taylor-Dunn R-380 +++ 1990 to 2007 Yamaha +++ All Motrec with Dana electric differential
Retail: |
$1.53 |
On Sale: |
$1.23 |
You Save: |
20% |
|
|
|
Input Shaft O-Ring for electric Dana differential on 1988 & newer E-Z-GO +++ 1990 to 2013 Columbia Par Car +++ 2006 & newer Cushman Titan, 1986 & newer Melex +++ 1990 to 1995 Hyundai +++ 1998 &newer Taylor-Dunn R-380 +++ 1990 to 2007 Yamaha +++ All Motrec with Dana electric differential
|
|
|
Inner Rear Axle Seal for 1965 to 1975 E-Z-GO gas and electric +++ 1963 to 1972 Harley Davidson gas models D, DF DC, and D4 and 1963 to 1976 electric models DE, DEF, and DEC and 1973 to early 1977 gas models D and D4 +++ 1976 to 1978 model DE-40 electric +++ Also Oil Seal for Baldor electric motor on Taylor-Dunn.
|
|
|
New Advanced High Torque Replacement Motor for Taylor-Dunn Industrial Vehicles and Tee Bird golf carts +++ Also Nordskog Cargo Carrier models 262, 264, 280, 282 +++ This motor has great torque for hill climbing.
Retail: |
$1,535.95 |
On Sale: |
$1,072.40 |
You Save: |
31% |
|
|
|
Drive Chain Case Cover for 1970 to 1972 Taylor-Dunn GT338 and GT348... Also 1971 to 1979 models B, BN and M... Also 1972 to 1975 models GT360 and GT 370... Also 1975 to 1985 GT371 and GT372... Also 1990s 48 volt Taylor Truck model B and others.
|
|
|
NO LONGER AVAILABLE +++ General Electric Factory Original Field Coils for 1981 to 1986-1/2 E-Z-GO 2 hp Motor +++ 1979 to 1986 models EV3-01/EV4-01 and RV3-01/RV4-0... Also 1984 to 1986 Club Car +++ Others with 10 internal spline or 16 external spline motors with all 4 studs on one end.
|
|
|
Copper Field Coil Repair Stud with square shoulder for:..Harley Davidson... E-Z-GO... Club Car... and many others with GE Motor.
|
|
|
Round Fiber Washer for old style GE Motors used on +++ Harley Davidson +++ Club Car +++ Cushman +++ E-Z-GO +++ Davis +++ Noland +++ Otis +++ Legend +++ Taylor-Dunn +++ Pargo and others.
|
|
|
Round Fiber Washer for old style GE Motors used on +++ Harley Davidson +++ Cushman +++ E-Z-GO +++ Davis +++ Noland +++ Pargo +++ Nordskog +++ Taylor-Dunn and others.
|
|
|
Club Car electric motor bearing on brush end from 1980 and newer (except IQ system) +++ E-Z-GO electric motor bearing on brush end on 1980 to 1996 +++ Also Jacobsen, Taylor-Dunn, Toro, Cushman +++ Yamaha electric motor bearing on brush end on 1990 and newer G8, G9, G14, G16, G19 and G20 +++ 1990 to 1995 Hyundai brush end motor bearing.
Retail: |
$13.95 |
On Sale: |
$11.36 |
You Save: |
19% |
|
|
|
81 Tooth Driven Sprocket for 1970 to 1972 Taylor-Dunn GT-338 and GT-348 +++ 1971 to 1979 models B, BN and M +++ 1972 to 1975 models GT-360 and GT370 +++ 1975 to 1985 GT-371 and GT-372 +++ Also model R-380 and 1990s 48 volt Taylor Truck model B and others.
Retail: |
$139.92 |
On Sale: |
$123.43 |
You Save: |
12% |
|
|
|
59 Tooth Driven Sprocket for 1970 to 1972 Taylor-Dunn GT338 and GT348 +++ 1971 to 1979 models B, BN and M +++ 1972 to 1975 models GT360 and GT370 +++ 1975 to 1985 GT371 and GT372 +++ 1990s 48 volt Taylor Truck model B and others.
|
|
|
15 Tooth Drive Sprocket for 1965 to 1970 Tee Bird +++ 1970 to 1972 Taylor-Dunn GT338 and GT348... Also 1971 to 1979 models B, BN and M +++ 1972 to 1975 models GT-360 and GT 370 +++ 1975 to 1985 GT-371 and GT-372 +++ 1990s 48 volt Taylor Truck model B and electric model R-380 +++ Karrior.
|
|
|
14 Tooth Drive Sprocket for 1971 to 1985 models B, BN and M and others +++ 3/4" bore.
|
|
|
48 Link Silent Drive Chain for 1970 to 1972 GT338 and GT348 Taylor-Dunn modes +++ 1971 to 1979 models B, BN, and M +++ 1972 to 1975 models GT-360 and GT-370 +++ 1975 to 1985 GT-371 and GT-372 +++ 1990s 48 volt Taylor Truck model B and others.
|
|
|
41 Link Silent Drive Chain for 1970 to 1972 GT338 and GT348 Taylor-Dunn models +++ 1971 to 1979 models B, BN, and M +++ 1972 to 1975 models GT-360 and GT-370 +++ 1975 to 1985 GT-371 and GT-372 +++ 1990s 48 volt Taylor Truck model B and others.
|
|
|
NO LONGER AVAILABLE +++ Brush Crossover Cable with Stud for 1984 to early 1986 Columbia Par Car with G.E. Motor with disc brake +++ Also E-Z-GO, Club Car, Cushman, Taylor-Dunn, Nordskog and Pargo with G.E. motor with brush cable interconnects.
|
|
|
Brush Spring for G.E. Motor used on 1986 to 1992 Columbia Par Car +++ 1980 and newer Club Car +++ 1988 and newer E-Z-GO new style G.E. motor 58 or 59 JBS "Tin Can style" (no field studs, smooth case) +++ HMK Marketeer models 438 and 439 +++1985 and newer Melex models 412, 512 and 625 +++ Cushman motor brush spring and speed board brush spring +++ Taylor-Dunn model B-150, B-248 and others +++ 1990 to 2002 Yamaha G5, G8, G9, G14, G16 and G19 +++ Davis, Legend, Noland, Nordskog, Otis and Pargo
|
|
|
Pull Type Brush Spring for GE Motors used on 1963 to 1971 Harley Davidson +++ 1965 to 1972 E-Z-GO +++ Pre 1980 Club Car. +++ Pre 1985 Melex +++ Cushman, Taylor-Dunn, Westinghouse Marketeer, Nordskog, and Pargo.
|
|
|
Brush Spring for Series Wound GE Motors used on some E-Z-GO, Club Car, Taylor-Dunn, Yamaha and Melex.
|
|
|
NO LONGER AVAILABLE +++ Use BR22-088 +++ Brush Spring for Advanced motors used on certain E-Z-GO +++ Club Car +++ Taylor-Dunn +++ Columbia Par Car +++ Western +++ Motrec +++ Nordskog/US Electricar Legend +++ Think +++ Gem +++ Also various industrial vehicles.
|
|
|
OEM (Original Equipment Manufacture) Brush Spring for Advanced motors used on certain E-Z-GO +++ Club Car +++ Taylor-Dunn +++ Columbia Par Car +++ Western +++ Motrec +++ Nordskog/US Electricar Legend +++ Think +++ Gem +++ Also various industrial vehicles.
|
|
|
Brush Spring Set of 4 for 19 Spline, 36 Volt Fleet Speed Motor used in for 1997 and newer E-Z-GO with Advanced Motor +++ 1993 to 2000 Columbia Par Car with Advanced Motor +++ 2004 and newer Club Car model DS and 2005 and newer Precedent with Advanced Motor +++ 2003 to 2007 Yamaha G22 with Advanced motor +++ Also Motrec model E-330 with and other models with Advanced Motor +++ Also Taylor-Dunn models B-248 and BO-012-38 Railroad Special and others with Advanced Motor
Retail: |
$64.95 |
On Sale: |
$41.23 |
You Save: |
37% |
|
|
|
Brush Set of 4 for GE Motors used on 1973 to 1975 Harley Davidson models DE and DE4 and 1977 to 1978 model DE3 and 1976 to 1978 model DE-40 and 1984 to 1985 Columbia Par Car with disc brake on motor +++ 1976 to 1980 Club Car +++ 1973 to 1979 E-Z-GO +++ HMK Marketeer models 438 and 439 and model 450 4-Runner +++ Taylor-Dunn model B-248 with Baldor or Taylor-Dunn motor and others +++ Cushman, Nordskog, Pargo, Noland and Otis.
|
|
|
Brush set with hook for GE Motors used on 1963 to 1971 Harley Davidson models DE, DEF, DEC and 1972 to 1975 models DE and DE4 +++ Also pre 1980 Club Car +++ Also 1965 to 1972 E-Z-GO +++ Also pre 1985 Melex +++ Also Cushman, Taylor-Dunn, Pargo, Westinghouse Marketeer, Otis and Nordskog.
|
|
|
CURRENTLY ON BACK ORDER, You can use BR22-060, Read note below +++ Brush Set for GE Motors used on 1986 to 1992 Columbia Par Car models E3, E4, P4E, E4S, EU4 and C6E +++ 1980 to 1992 E-Z-GO +++ 1980 to 1993 Club Car 36 volt +++ 1989 to 1992 Yamaha G2 and G9 with GE motor +++ Cushman, Taylor-Dunn, Legend, Nordskog and Hyundai.
|
|
|
Brush Set of 4 for GE Motors with cable lead crossovers for +++ 1973 to 1975 Harley Davidson models DE and DE4 +++ 1977 to 1978 Harley model DE3 and 1976 +++ 1978 Harley model DE-40 +++ 1984 to 1985 Columbia Par Car with disc brake on motor +++ 1981 to 1985 Club Car +++ 1976 to 1977 HMK Marketeer models 438 and 439 and model 450 4-Runner +++ E-Z-GO, Cushman, Pargo, Taylor-Dunn, Nordskog and Davis.
Retail: |
$66.95 |
On Sale: |
$43.32 |
You Save: |
36% |
|
|
|
Brush Set of 4 with Hex Stud for 19 Spline, 36 Volt, 2 HP, 2800 RPM G.E. 58 or 59 JBS "Tin Can" style motor +++ Used on 1988 & newer E-Z-GO non DCS and PDS +++ 1994 & newer Club Car +++ 1993 to 2001 Cushman Minute Miser and other models with JB58 and JB59 motors +++ 1990 to 2002 Yamaha G5, G8, G9, G14, G16 and G19 and 2003 to 2014 with GE motor +++ Taylor-Dunn model B1-50 +++ 1992 & newer Melex models 152, 412, 512E and 625E with Dana differential +++ 1990 to 1995 Hyundai with 19 spline Dana.
Retail: |
$113.95 |
On Sale: |
$78.37 |
You Save: |
32% |
|
|
|
Three Lead Brush Set for Series Wound GE Motors used on some Club Car, Taylor-Dunn and Raymond lift trucks.
Retail: |
$339.95 |
On Sale: |
$197.45 |
You Save: |
42% |
|
|
|
Brush Set of 4 with Hex Stud for 19 Spline, 36 Volt Fleet Speed Advanced Motor for 1997 and newer E-Z-GO +++ 2004 and newer Club Car model DS +++ 1993 to 2000 Columbia Par Car +++ 2005 and newer Club Car Precedent model +++ 2003 to 2007 Yamaha G22 +++ Taylor-Dunn models B-248 +++ Motrec model E-330 +++ Duffy Boats and other models with Advanced Motor. .
Retail: |
$90.95 |
On Sale: |
$69.32 |
You Save: |
24% |
|
|
|
Motor Brushes with metal plate for spring for Baldor Motor used by Cushman and Taylor-Dunn.
Retail: |
$59.99 |
On Sale: |
$47.43 |
You Save: |
21% |
|
|
|
Motor Brushes with twin leads and metal hook for pull spring for 1976 to 1983, 36 volt Cushman Titan one ton +++ Also early Taylor-Dunn B-248 with GE motor with pull type brush springs
|
|
|
Set of Four Motor Brushes with hook for spring for Taylor-Dunn with General Electric motor.
|
|
|
Brush Lead Assembly for Advanced motors used in some E-Z-GO, Club Car, Taylor-Dunn, Motrec and other industrial vehicles and lift trucks
Retail: |
$112.22 |
On Sale: |
$74.23 |
You Save: |
34% |
|
|
|
NO LONGER AVAILABLE +++ You Can use BR22-050 holder with BR11-000 Brushes +++ Brush Holder Assembly for old style G.E. motor with flat bar brush crossovers for: +++ Harley Davidson +++ E-Z-GO +++ Cushman +++ Taylor-Dunn, Nordskog +++ HMK Marketeer 438/439 +++ Nordco Marketeer model 139 +++ Nordco model 450 +++ Also Otis, and Pargo.
|
|
|
NO LONGER AVAILABLE +++ Use BR22-050 with BR11-000 +++ Brush Holder with Cable Crossovers with Studs for G.E. Motor on Harley Davidson +++ E-Z-GO +++ Cushman +++ Taylor-Dunn model B-248 +++ Nordskog with 2hp motor +++ Also Otis, Pargo and others.
|
|
|
NO LONGER AVAILABLE +++ You Can Replace with BR22-050 Holder with BR11-000 brushes +++ Replacement Brush Holder Assembly for old style G.E. motor with flat bar brush crossovers for: +++ Harley Davidson +++ E-Z-GO +++ Cushman +++ Taylor-Dunn, Nordskog +++ HMK Marketeer 438/439 +++ Nordco Marketeer model 139 +++ Nordco model 450 +++ Also Otis, and Pargo.
|
|
|
Brush Holder with Springs for 1980 to 1992 E-Z-GO with G.E. Motor +++ 1980 to 1993 Club Car 36 volt +++ 1986 to 1990 Columbia Par Car +++ Also Taylor-Dunn and Legend.
|
|