Rocker Arm Adjusting Nut for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.

Squeeze Type 1/4" Hose Clamp.

5/16" Steel Fuel Filter for Cushman, Yamaha and Taylor-Dunn +++ Fits most golf cars that use 5/16" I.D. fuel line hose.

Replacement 90 degree Fuel Filter for 1990 to 1995 Hyundai with 8mm inlet and outlet

Now Available +++ Lid for Air Cleaner Case (Air Box) for 1985 to 1995 Yamaha models G2, G5, G8, G9 and G11 +++ Also 1986 to 1997 Taylor-Dunn model R-680 truck.

CURRENTLY ON BACK ORDER +++ Air Box Lid for 1996 to 2014 Yamaha models G11, G16, G20, G21, B22, G23, G27, G28 and G29 YDRA "The Drive"

Air Cleaner Case (Air Box) for 1985 to 1995 Yamaha models G2, G5, G8, G9 and G11 +++ Also 1986 to 1997 Taylor-Dunn model R-680 truck.

ON BACK ORDER +++ Due in late July +++ Air Cleaner Case (Air Box) for 1996 to 2014 Yamaha models G11, G16, G20, G21, B22, G23, G27, G28 and G29 YDRA "The Drive"

CURRENTLY ON BACK ORDER +++ Balance Shaft Collar for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.

Breather Gasket for 1996 to 2009 Yamaha G11, G16, G20, G21, G22, G23, G27 and G28 and 2007 and newer model YDRA "The drive +++ All with four cycle engine.

Carburetor Base Gasket for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 +++ Also 1986 to 1997 Taylor-Dunn model R-680 truck.

Carburetor Joint Gasket for 1996 to 2009 Yamaha G11, G16, G20, G21, G22, G23, G27 and G28 +++ Also 2007 and newer model YDR, "The Drive".

Carburetor Joint O-ring for 1996 to 2009 Yamaha G11, G16, G21, G22, G23, G27 and G28 +++ Also 2007 and newer model YDR, "The Drive" +++ All with 4 cycle engine.

Connecting Rod for 1985 to 1996 Yamaha G2, G8, G9, G11 and G14 with 4 cycle engine +++ 1986 to 1997 Taylor-Dunn model R-680 engine.

Connecting Rod for 1996 to 2009 Yamaha G16, G20, G21, G22, G23, G27 and G28 +++ Also 2007 and newer model YDR, "The Drive" +++ All with 4 cycle engine.

Connecting Rod Bolt for 1985 to 1996 Yamaha G2, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine. NLA

NO LONGER AVAILABLE +++ Connecting Rod for 1978 to 1989 Yamaha GI and G3 with 2 cycle engine.

Crank Pin Bearing for 1978 to 1986 Yamaha GI and G3 with 2 cycle engine.

NO LONGER AVAILABLE +++ Crankshaft Pin for 1978 to 1989 Yamaha GI with 2 cycle engine.

Crankshaft bearing for 1976 to 1993 E-Z-GO +++ 1996 to 2008 Columbia Par Car +++ 1990 to 1995 Hyundai +++ 1996 to 2000 Melex +++ 1978 to 1989 Yamaha +++ 1965 to 1968 Cushman K181 Kohler engine +++ Camshaft bearing for 1984 to 1991 Club Car with 351cc KF82 Kawasaki engine.

Crankcase Cover Gasket for 1996 to 2009 Yamaha G11, G16, G20, G21, G22, G23, G27 and G28 +++ Also 2007 and newer model YDRA "The Drive", with four cycle engine.

Crankcase Gasket for 1985 to 1996 Yamaha G2, G5, G8, G9, G11, and G14 with four cycle engines J38, JA2, J42, J50, J55, JF2, JG5, JJ3, JR3, or JN3.

ONLY ONE AVAILABLE +++ Crankshaft for 1996 to 2009 Yamaha G16, G20, G21, G22, G23, G27 and G28 and 2007 and newer model YDR, "The Drive" +++ All with 4 cycle engine.

NO LONGER AVAILABLE +++ Crankshaft Assembly for 1978 to 1989 Yamaha G1 & G3 +++ Includes rod, crankshaft and crank pin in a balanced assembly.

Crankshaft Bearing for 1991 and newer E-Z-GO 4-cycle with MCI engine, also 1996 and newer Club Car with FE290 and FE350 engines +++ Crankshaft Bearing for 2015 and newer Club Car Precedent with EX40 Subaru engine +++ Also Clutch Side Crankshaft Bearing on 1996 and newer Yamaha G11, G16, G20, G21, G22 and "The Drive" G29 +++ Also Output Clutch Side Crankshaft Bearing 1994 to 1996 Melex 16 cubic inch, 9 hp, black Vanguard engine.

Crankshaft Bearing for 1984 to 1991 Club Car with 341 cc Engine +++ Also Clutch Side Crankshaft Bearing for 1978 to 1996 Yamaha models G1, G2, G3, G5, G8, G9 and G14 +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.

Fan Side Crankshaft Bearing for 1982 to 2002 Yamaha G2, G5, G8, G9, G11, G14, G16, and G20 +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.

Crankshaft Seal for 1982 to 2002 Yamaha G2, G5, G8, G9, G11, G14 fan side only and both sides on 1996 to 2004 models G16, G20 and G21 +++ All with 4 cycle engine +++ Also for 1986 to 1997 Taylor Dunn model R-680 engine.

Clutch Side Crankshaft Seal (Large) for 1978 to 1989 Yamaha G1 +++ Also 1986 G3 "Sun Classic" model with 2 cycle engine.

Clutch Side Crankshaft Seal for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.

Fan/Flywheel Side Crankshaft Seal (Small) for 1978 to 1989 Yamaha G1 +++ Also 1986 G3 "Sun Classic" model with 2 cycle engine.

NO LONGER AVAILABLE +++ Crankshaft for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.

NOW AVAILABLE +++ Cylinder and Piston Kit for 1978 to 1989 Yamaha GI and G3 with 2 cycle engine +++ Except 1982 model J17 +++ Fits models J10, J24 and J31.

Cylinder Base Gasket for 1978 to 1989 Yamaha G1 and G3, with J10, J17, J24, J31 and J42 two cycle engine.

Gear End Dynamic Balancer Shaft Bearing for 1984 to 1991 Club Car with 341cc engine +++ 2015 and newer Club Car Precedent Dynamic Balancer Shaft Bearing with EX40 Subaru engine +++ 1996 to 2009 Yamaha models G11 through G28 and 2007 and newer YDR "The Drive" balancer shaft bearing +++ Yamaha G22 Steering Pinon Bearing +++ Steering Input Shaft Bearing on 1987 to 1989 Columbia Par Car.

NONE CURRENTLY AVAILABLE +++ Crankcase for 1985 to 1988 Yamaha G2 with J38 four cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine +++ NOTE: Special order item, Allow one to two weeks before shipping.

NONE CURRENTLY AVAILABLE +++ On Back Order +++ Engine Cylinder for 1978 to 1989 Yamaha GI & G3 +++ Except 1982 model J17 +++ Fits models J10, J24, and J31 with 2 cycle engine.

Engine Rebuild Kit for 1996 to 2002 Yamaha G11, G16, G20 ++ Includes Standard Piston and Ring Assembly and Gaskets.

Exhaust Gasket for 1996 to 2009 Yamaha G16 to G28 +++ Also 2007 and newer model YDR, "The Drive" +++ Also Intake and Exhaust Gasket for 18hp and 22hp OMC Cushman engine.

Exhaust Gasket for 1978 to 1986 Yamaha G1 and G3 with 2 cycle engine +++ Also 1985 to 1996 models G2, G8, G9, G11 and G14 with 4 cycle engines +++ Not for 1982 J17 engine.

Exhaust Gasket for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.

Exhaust Sealing Ring for 1979 to 1986 Yamaha G1 golf cart and G3 Sun Classic with J10, J17, J24, J31 or J42 two cycle engine

Exhaust Valve for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.

Exhaust Valve for 1996 to 2009 Yamaha G11, G16, G20, G21, G22, G23, G27 and G28 +++ Also 2007 and newer model YDR, "The Drive" +++ All with four cycle engine.

1/4" inline fuel filter for most carts.

Fuel Filter for 1984 and newer Club Car DS and Precedent +++ 1994 and newer E-Z-GO 4 cycle +++ Yamaha G14-G22 +++ Also Melex +++ Fits most golf cars that use 1/4" or 5/16" I.D. tubing.

Four Feet of nylon reinforced 1/4" Fuel Line for many carts.

Gasket for Air Cleaner Case (Air Box) for 1985 to 1995 Yamaha models G2, G5, G8, G9 and G11 +++ Also 1986 to 1997 Taylor-Dunn model R-680 truck.

Replacement Governor Rod Assembly for 1979 to 1986 Yamaha G1 and 1986 Yamaha G3 +++ Also Replacement Oil Injection Rod on E-Z-GO with 2 cycle engine with oil injection.

Governor Arm Fork for 1979 to 1996 Yamaha models G1, G2, G3, G5, G8, G9, G11 and G14.