Hairpin Style Clip for Accelerator Cable Clevis Pin for 1979 to 2009 Yamaha gas models G1, G2, G3, G5, G8, G9, G11, G14, G16, G19, G20, G21, G22, G23, G27, G28 +++ Also 2007 and newer Yamaha model YDR, "The Drive" +++ Also 1986 to 1997 Taylor-Dunn model R-680 truck +++ Many other applications.

Valve Spring for All 1985 and newer Yamaha golf carts with 4 cycle engines, G2 through G29 YDRA "The Drive" +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.

Replacement Governor Rod Assembly for 1979 to 1986 Yamaha G1 and 1986 Yamaha G3 +++ Also Replacement Oil Injection Rod on E-Z-GO with 2 cycle engine with oil injection.

Flanged Castle Nut for tie rod end on 1979 to 1986 Yamaha G1 and G3.

Oil Seal Retaining Circlip for Input Shaft Seal on 1979 to 1985 Yamaha G1 and 1986 G3 gas +++ Also 1985 to 2008 models G2, G5, G8, G9, G11, G14, G16, G21, G22, G23, G27 and G28.

Large Black Head Aluminum Pop Rivet for securing Cowl to Instrument Panel on 1994-1/2 and newer E-Z-GO +++ Can be used on other carts and applications.

Bag Strap Aluminum Rivet for 1965 to 1994 Pre-Medalist/TXT E-Z-GO +++ Can be used on other carts and applications.

12mm-1.75 Slotted Castle Type Nut for Upper King Pin on ALL Melex four wheel models 102, 212, 252, 412, 512, 625, 663F2H, 666F2H and 667F2H +++ Also 1999 Taylor-Dunn model ER-200 Rover.

Accelerator Cable E-clip for 1979 to 2008 Yamaha G1 through G28 models.

Hill Brake Pedal Return Spring for 2007 to 2014 Yamaha G29, "The Drive".

CURRENTLY ON BACK ORDER +++ Throttle Cable Torsion Spring for 1979 to 2008 Yamaha G1 through G28 models and 2007 and newer G29, "The Drive".

6mm-1.0 x 30mm Contact Hold Down Bolt for 1981 to 1992 Yamaha models G1, G2, G3, G5 and G9 +++ Also 1988 to 1991 Taylor-Dunn model R-380 foot switch board +++ Bolts movable contact number SP99-000 to SP99-030 movable arm contact holder.

Accelerator Cable End Spacer for 1979 to 2008 Yamaha G1 through G28 models and 2007 and newer model YDRA G29 "The Drive".

Throttle Shaft Bushing for 1979 to 2008 Yamaha gas models G1 through G28 +++ Also 1986 to 1997 Taylor-Dunn model R-680 truck.

Black Aluminum Pop Rivet used to secure fender caps, bag strap buckles and other trim on all years of E-Z-GO +++ Can be used on other carts and applications.

5/32" x 7/16" x .450" Black Aluminum Pop Rivet used on 1994-1/2 to 2018 gas and 36/48 volt electric E-Z-GO Medalist and TXT models on Cowl and elsewhere +++ Can be used on other carts and applications.

3/16" x 5/8" x 3/8" Black Aluminum Pop Rivet used to secure fender caps and other trim on all years of E-Z-GO +++ Can be used on other carts and applications.

Rocker Arm Adjusting Nut for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.

3/16" x 9/16" x 5/8" Aluminum Rivet for 1994-1/2 and newer E-Z-GO gas and 36volt and 48 volt electric TXT, Medalist, RXV, ST Vehicles, Shuttles, Cushman, Express, Terrain, Woods MAV 350, MAV 480 +++ Can be used on other carts and applications.

3/16" x 5/16" x 5/8" Black Aluminum Rivet for 1996 and newer E-Z-GO gas and 36 volt and 48 volt electric TXT for attaching rear bumper +++ Can be used on other carts and applications.

3/16" x 5/8" x 3/8" Small Flange Aluminum Pop Rivet used to secure fender caps and other trim on all years of E-Z-GO +++ Can be used on other carts and applications.

3/16" x .70" x 5/8" Stainless Steel Pop Rivet for attaching Seat Hinge on 2001 and newer E-Z-GO models RXV, TXT, Cushman, Express, E-Z-GO Shuttle, Medalist, Terrain. +++ Can be used on other carts and applications.

5/32" x 9/16" x .470" Aluminum Pop Rivet used on 1994-1/2 to 2007 E-Z-GO Medalist, TXT, M5 & other models for attaching mat and elsewhere +++ Can be used on other carts and applications.

6mm -1.00mm Locking Whiz Type Flange Nut used on battery hold down rod on 1979 to 2008 Yamaha electric models G1, G2, G8, G9, G14, G16, G19, G22, G23 and G27 +++ Other carts and applications.

6mm -1.00mm Stainless Steel Whiz Type Flange Nut used on battery hold down rod on 1979 to 2008 Yamaha electric models G1, G2, G8, G9, G14, G16, G19, G22, G23 and G27 +++ Other carts and applications.

6mm -1.00mm Stainless Steel Nylock Nut to use on the battery hold down rod on 1979 and newer Yamaha gas models G1, G2, G3, G5, G8, G9, G11, G14, G16, G19, G20, G22, G22, G23 and G27 and YDRA "The Drive" +++ Other carts and applications.

Differential Drain Plug for 1979 to 1989 Yamaha models G1, G2, G3, G5, G8, G9, G11 and G14.

Differential Skid Plate for 1995 to 2008 Yamaha models G14, G16, G19, G20, G22 and G27.

Stainless Steel Pop Rivet used on E-Z-GO Gas & Electric Vehicles in front/mid/rear body, body panels, DCS (Drive Control System) battery/connections, PDS (Precision Drive System) installs, front cowl and various other parts assemblies. +++ Can be used on other carts and applications.

Metric Lock Nut for King Pin on 1978 to 1989 Yamaha G1 and G3.

Accelerator Return Spring for 1978 to 1981 Yamaha gas models G1.

Front Bumper Flanged Metric Lock Nut for mounting BD44-290 front bumper on 2004 and newer Club Car Precedent model +++ Use with BD44-293 bolt +++ Two required +++ Other carts and applications

Washer Plate for tie rod end on 1979 to 1986 Yamaha G1 and G3 +++ Also used on secondary clutch on 1982 to 2002 models G2 through G21.

3/16" x 7/16" x 5/8" Large Black Head Pop Rivet for securing Fender Caps other trim on all years of E-Z-GO +++ Can be used on other carts and applications.

Metric Stainless Steel and Brass Nut and Washer Kit for Motor Stud on late 1979 to 1982 Harley Davidson model DE3 and MGIV with Hitachi Motor only +++ Club Car 1980 to 1984 +++ 1981 to 1988 Yamaha G1 with Hitachi motor.

King Pin and Bushing Kit for 2003 to 2007 Yamaha G22, G27 +++ Also 2007 and newer G29 model YDR, "The Drive".

King Pin Bolt for 2003 to 2007 Yamaha G22, G27 +++ Also 2007 and newer G29 model YDR, "The Drive".

King Pin Lock Nut for 2003 to 2007 Yamaha G22, G27 +++ Also 2007 and newer G29 model YDR, "The Drive".

Upper and Lower Steering Knuckle Thrust Cover for 2003 to 2007 Yamaha G22, G27 +++ Also 2007 and newer G29 model YDR, "The Drive".

King Pin Bolt for 1993 to 2009 Yamaha models G11, G21, G23 and G28.

12mm U-style Flanged Locking Nut used on front suspensions on 1982 and newer Yamaha G1 and newer +++ Also Secondary Driven Clutch Retaining Nut for 1982 to 2009 Yamaha G2, G5, G8, G9, G11, G14, G16, G19, G20, G21, G22, G23, G27 and G28 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.

12mm U-style Flanged Locking Nut used on front suspensions on various Yamaha models.

1/4" x 13/16" x 11/16" Christmas Tree Style Push In Black Plastic Rivet for E-Z-GO, Club Car, Yamaha, Harley Davidson and Columbia Par Car and others.

1/4" x 13/16" x 11/16" Christmas Tree Style Push In Black Plastic Rivet for E-Z-GO, Club Car, Yamaha, Harley Davidson and Columbia Par Car and others.

1/4"-5/16" Fuel Line Clamp for Club Car, Columbia Par Car, E-Z-GO, Harley Davidson and many others.

2" Hose Clamp for air hose on many carts.

Freeze Plug Seal for 1988 and newer Dana Differential on E-Z-GO electric and 2 cycle gas +++ 2005 and newer Cushman models 875, Titan, and Personnel Carrier +++ 1986 and newer Melex electric models 412E, 512E and 625E +++ 1995 and newer Yamaha electric G14, G16 and G19 +++ 1990 and newer Columbia Par Car electric models.

Accelerator Throttle Stop Spring for 1985 to 1994 Yamaha gas models G2, G5, G8, G9, G11 and G14 +++ Also 1986 to 1997 Taylor-Dunn model R-680 truck +++ Also replacement return arm spring on 1985 to 1995 Columbia Par Car speed control module.

Fuel Inlet Door For 1985 to 1995 Yamaha G2 and G9.

Brake Pedal Return Spring for 1982 to 1989 Yamaha G1 and G3 +++ Also 1986 to 2009 models G2, G5, G8, G9, G11, G14, G16, G19, G20, G21, G23, G27 and G28.