NO LONGER AVAILABLE +++ Good Used 16 External Spine, 36 Volt Motor for 1970 to 1983 Club Car +++ 1969 and newer Pargo +++ 1960s E-Z-GO golf cart with 16 Spline Motor and 1986 EZ-GO Industrial models +++ Also replaces Hitachi motor MT320-07 on early Yamaha GI +++ Legend models EV3-01/EV4-01 and RV3-01/RV4-01 +++ All carts with Terrill differential.
|
|
|
NO LONGER AVAILABLE +++ Screw On Motor Repair Stud for repairing broken field coil studs on GE Motors... 5/16" by 18 coarse thread.
|
|
|
NO LONGER AVAILABLE +++ Factory Rebuilt 19 Spline, 8.1 HP Peak, 4160 RPM, 36 Volt High Speed Replacement Motor Upgrade +++ For 1988 and newer E-Z-GO non DCS and PDS +++ 1990 to 2002 Yamaha G8, G9, G14 and G16 +++ 1986 and newer Melex models 412E, 512E, 625E and newer models with Dana differential +++ 1990 to 2000 Columbia Par Car +++ 1990 to 1995 Hyundai +++ Will increase speed to 18 mph over stock 2700 RPM motor
|
|
|
Metric Stainless Steel and Brass Nut and Washer Kit for Motor Stud on late 1979 to 1982 Harley Davidson model DE3 and MGIV with Hitachi Motor only +++ Club Car 1980 to 1984 +++ 1981 to 1988 Yamaha G1 with Hitachi motor.
|
|
|
36 and 48 Volt Replacement SepEx Motor for 1995 to 2009 E-Z-GO with DCS (Drive Control System) and PDS (Positive Drive Control) systems +++ Also 1997 to 2000 Columbia Par Car with SepEx system +++ Also 48 Volt Yamaha G19 and G22 with Sep Ex regen system.
|
|
|
Motor Wiring Harness from Controller to Motor Speed Sensor on Advanced Motors & Drives (ADM) motors used on 2000 and newer E-Z-GO +++ 2002 to 2007 Yamaha G22 +++ 2004 and newer Club Car 48 volt model DS and 2005 and newer Precedent with IQ system.
|
|
|
Rubber Spline Bumper Grommet for electric motor on 1990 to 2008 Yamaha G8, G9, G14, G16, G19, G22, G23 & G27 +++ Also 2007 and newer model YDR, "The Drive".
|
|
|
Rubber Spline Bumper for G.E. Motors on 1989 and newer E-Z-GO +++ Pre 1994 Club Car +++ 1986 to 2000 Columbia Par Car +++ 1990 to 2007 Yamaha G8-G27 and 2007 to 1014 model YDR "The Drive" +++ 1993 to 2001 Cushman Minute Miser and other models with 58JB and 59JB GE motor +++ Also for Advanced Motors and Drives Motors.
|
|
|
Motor Speed Sensor Kit for 2003 to 2014 Yamaha G22 and G29.
Retail: |
$69.98 |
On Sale: |
$57.73 |
You Save: |
18% |
|
|
|
Speed Sensor with Magnet for Advanced Motors & Drives (ADM) Motor used in 2002 to 2007 Yamaha G22 +++ 2004 and newer Club Car 48 volt model DS and 2005 and newer Precedent +++ 2000 and newer E-Z-GO +++ Western with Advanced motor +++ 2004 and newer Columbia Par Car with sep-ex Advanced motor +++ 2014 to 2016 Polaris GEM with Advanced motor +++ 2007 and newer Tomberlin E-merge.
Retail: |
$108.95 |
On Sale: |
$68.57 |
You Save: |
38% |
|
|
|
G.E. Motor Insulating Bushing Kit for G.E. 58 or 59 JBS "Tin Can" Style Motor used on 1994 and newer Club Cars +++ 1993 to 2001 Cushman Minute Miser and other models with 58JBS or 59JBS GE motor +++ Newer Columbia Par Car +++ Also E-Z-GO +++ Yamaha G8 to G22 models and 2003 to 2014 G22, G23, G27 and YDRE "The Drive with GE motor +++ Taylor-Dunn model B1-50.
Retail: |
$47.95 |
On Sale: |
$29.32 |
You Save: |
39% |
|
|
|
Motor Input Shaft Seal on 1980 to 1984 Club Car with 16 spline Hitachi motor from Club Car serial number A8003-15260 to A8405-50906... Most likely will fit 16 spline Hitachi motors used on Yamaha and others.
|
|
|
19 Spline Motor Coupler for repairing stripped splines on 1988 to 1996 E-Z-GO +++ 1990 to 1998 Columbia Par Car +++ 1990 to 2002 Yamaha 36 volt models G8, G9, G14 and G16 +++ Also Melex with 19 spline GE motors.
|
|
|
G.E. Motor Insulating Bushing Kit for G.E. Motor with Square Insulating Bushing for old style GE Motors used on Harley Davidson +++ Also 1984 to 1993 Club Car +++ Also Cushman, E-Z-GO, Davis, Noland, and others.
|
|
|
Sealed Drive End Motor Bearing for Taylor-Dunn and Yamaha with G.E. Motor.
Retail: |
$31.53 |
On Sale: |
$19.43 |
You Save: |
39% |
|
|
|
Electric Motor Bearing on Harley Davidson +++ E-Z-GO +++ Club Car +++ Cushman +++ Taylor-Dunn +++ Nordskog +++ Yamaha and others with General Electric, Baldor or Hitachi motors.
|
|
|
Intermediate Gear O-Ring for electric Dana differential on 1988 & newer E-Z-GO +++ 1990 to 2013 Columbia Par Car +++ 2006 & newer Cushman Titan, 1986 & newer Melex +++ 1990 to 1995 Hyundai +++ 1998 &newer Taylor-Dunn R-380 +++ 1990 to 2007 Yamaha +++ All Motrec with Dana electric differential
Retail: |
$1.53 |
On Sale: |
$1.23 |
You Save: |
20% |
|
|
|
NO LONGER AVAILABLE +++ 10 Spline Input Shaft with Bearings for 1980 to 1995 Yamaha electric models G1, G2, G3, G5, G8 and G9.
|
|
|
Input Shaft Seal on 2008 and newer E-Z-GO TXT and RXV with electric transaxle +++ Also 2015 to 2020 Yamaha electric Drive and Drive 2.
|
|
|
Input Shaft O-Ring for electric Dana differential on 1988 & newer E-Z-GO +++ 1990 to 2013 Columbia Par Car +++ 2006 & newer Cushman Titan, 1986 & newer Melex +++ 1990 to 1995 Hyundai +++ 1998 &newer Taylor-Dunn R-380 +++ 1990 to 2007 Yamaha +++ All Motrec with Dana electric differential
|
|
|
Input Shaft Gear for 1979 to 1988 Yamaha electric models G1, G2 and G3.
|
|
|
High Speed 48 Volt, 3.4 hp, 3400 rpm, Advanced Motor for 2002 to 2009 Yamaha G22 and G27 and 2007 and newer model YDR, "The Drive".
Retail: |
$1,356.95 |
On Sale: |
$976.47 |
You Save: |
29% |
|
|
|
Snap-In "Old Style" Motor Speed Sensor for GE motors on 2004 Club Car models DS and Precedent +++ Also E-Z-GO +++ Also Yamaha with shunt wound (Sep-Ex) GE motors.
Retail: |
$87.95 |
On Sale: |
$64.33 |
You Save: |
27% |
|
|
|
"Old Style" Motor Speed Sensor for GE motors on pre 2004 Club Car models DS and Precedent +++ Also E-Z-GO +++ Also Yamaha with shunt wound (Sep-Ex) GE motor number 5BC59JB6251C.
Retail: |
$119.99 |
On Sale: |
$78.66 |
You Save: |
35% |
|
|
|
Magnet and Bearing Kit for GE motors on 2004 and newer Precedent model and 2006 to 2008-1/2 Club Car model DS +++ Also 2003 to 2008 G22 and G27 and newer Yamaha "The Drive" model G29 with shunt wound (Sep-Ex) GE motors.
Retail: |
$69.95 |
On Sale: |
$44.44 |
You Save: |
37% |
|
|
|
Copper Field Coil Repair Stud with square shoulder for:..Harley Davidson... E-Z-GO... Club Car... and many others with GE Motor.
|
|
|
NO LONGER AVAILABLE +++ Extreme High Torque 36 and 48 volt Sep Ex 19 Spline Motor +++ 7 HP Peak @ 2050 RPM at 48 Volts +++ 1995 to 2009 E-Z-GO with DCS (Drive Control System) and PDS (Positive Drive Control) systems +++ 2003 and newer Columbia Par Car +++ Also replacement for Bad Boy Buggies, Tomberlin.
|
|
|
Club Car electric motor bearing on brush end from 1980 and newer (except IQ system) +++ E-Z-GO electric motor bearing on brush end on 1980 to 1996 +++ Also Jacobsen, Taylor-Dunn, Toro, Cushman +++ Yamaha electric motor bearing on brush end on 1990 and newer G8, G9, G14, G16, G19 and G20 +++ 1990 to 1995 Hyundai brush end motor bearing.
Retail: |
$13.95 |
On Sale: |
$11.36 |
You Save: |
19% |
|
|
|
Cable Adapter for High Speed 48 Volt, 3.4 hp, 3400 rpm, Advanced Motor when installing in 2007 and newer model YDR, "The Drive".
Retail: |
$77.95 |
On Sale: |
$43.73 |
You Save: |
44% |
|
|
|
Brush Spring for Series Wound GE Motors used on some E-Z-GO, Club Car, Taylor-Dunn, Yamaha and Melex.
|
|
|
Brush Spring Set for Twin Lead Brush and Triple Lead Brush on many Series Wound GE Motors used on E-Z-GO, Club Car, Yamaha, Nordskog, Western and Baker lift trucks
|
|
|
Brush Spring for 2003 to 2007 Yamaha G22 and 2007 and newer YDRE with DM430-06 Hitachi motor.
|
|
|
Brush Set for GE Motors used on 1986 to 1992 Columbia Par Car models E3, E4, P4E, E4S, EU4 and C6E +++ 1980 to 1992 E-Z-GO +++ 1980 to 1993 Club Car 36 volt +++ 1989 to 1992 Yamaha G2 and G9 with GE motor +++ Cushman, Taylor-Dunn, Legend, Nordskog and Hyundai.
|
|
|
Brush Set of 4 with Hex Stud for 19 Spline, 36 Volt, 2 HP, 2800 RPM G.E. 58 or 59 JBS "Tin Can" style motor +++ Used on 1988 & newer E-Z-GO non DCS and PDS +++ 1994 & newer Club Car +++ 1993 to 2001 Cushman Minute Miser and other models with JB58 and JB59 motors +++ 1990 to 2002 Yamaha G5, G8, G9, G14, G16 and G19 and 2003 to 2014 with GE motor +++ Taylor-Dunn model B1-50 +++ 1992 & newer Melex models 152, 412, 512E and 625E with Dana differential +++ 1990 to 1995 Hyundai with 19 spline Dana.
Retail: |
$113.95 |
On Sale: |
$78.37 |
You Save: |
32% |
|
|
|
Twin Lead Brush Set for many Series Wound GE Motors used on E-Z-GO, Club Car, Yamaha, Nordskog, Western and Baker lift trucks
Retail: |
$262.95 |
On Sale: |
$189.38 |
You Save: |
28% |
|
|
|
Three Lead Brush Set for Series Wound GE Motors used on some Club Car, Taylor-Dunn and Raymond lift trucks.
Retail: |
$339.95 |
On Sale: |
$197.45 |
You Save: |
42% |
|
|
|
Brush Set for 2003 to 2007 Yamaha G22 and 2007 and newer YDRE with DM430-06 Hitachi motor.
|
|
|
Brush Holder for late 1979 to 1982 Harley Davidson model DE3 and MGIV with Hitachi Motor only +++ 1981 to 1984 Club Car +++ 1978 to 1988 Yamaha G1 and G2
|
|
|
Brush Holder for Series Wound GE Motors used on some E-Z-GO, Club Car, Yamaha and Melex.
|
|
|
Brush Holder for Series Wound GE Motors used on some Club Car, Taylor-Dunn and Raymond lift trucks.
|
|
|
Brush Holder for Series Wound GE Motors used on some E-Z-GO, Club Car and Yamaha
|
|
|
Motor Brush Holder with Springs for G.E. 58JBS or 59JBS "Tin Can" Style Motor used on 1994 and newer Club Cars +++ 1993 to 2001 Cushman Minute Miser and other models with 58JBS or 59JBS GE motor +++ Newer Columbia Par Car +++ 1998 and newer non DCS E-Z-GO +++ Yamaha G8 to G22 models and 2003 to 2014 G22, G23, G27 and YDRE "The Drive with GE motor +++ Taylor-Dunn model B-150 +++ 1992 and newer Melex models 152, 412, 512E and 625E with GE motor.
Retail: |
$74.95 |
On Sale: |
$64.46 |
You Save: |
14% |
|
|
|
Brush Holder with Springs for 1997 to 2009 E-Z-GO with Advanced Motor +++ 2004 and newer Club Car model DS and 2005 and newer Precedent with Advanced Motor +++ 2003 to 2007 Yamaha G22 with Advanced motor +++ Motrec with A00, D00 and DC3 Advanced motor +++ 1992 and newer Nordskog 280 and 282 models A, B, C and D from serial number 280A92H019 +++ Taylor-Dunn models B-248 and BO-012-38 and TD motor part number 70-054-41 +++ Also used on Raymond, Clark. Crown and many other brands of lift trucks
Retail: |
$141.95 |
On Sale: |
$97.43 |
You Save: |
32% |
|
|
|
Brush Holder with Springs for 1994-1/2 and newer E-Z-GO with Advanced Motor +++ Club Car 48 volt Limo with Advanced Motor number ET6-4001 +++ Columbia Par Car and Nordskog with Advanced motor number K91-4003 +++ Bad Boy Buggies with Advanced motor number DA7-4009, Duffy Boats with Advanced motor number 203-14-4003, Bombardier with Advanced motor number CB6-4001, CB7-4002, CB8-4003 +++ Also used on Raymond, Clark. Crown and many other brands of lift trucks
|
|
|
NO LONGER AVAILABLE +++ Replacement Brush Holder with Springs for late 1979 to 1982 Harley Davidson model DE3 and MGIV with Hitachi Motor only +++ 1981 to 1984 Club Car +++ 1978 to 1988 Yamaha G1 and G2
|
|
|
Brush Holder for 2003 to 2007 Yamaha G22 and 2007 and newer YDRE with DM430-06 Hitachi motor.
Retail: |
$81.95 |
On Sale: |
$69.36 |
You Save: |
16% |
|
|
|
Brush Crossover Lead for Series Wound GE Motors used on some E-Z-GO, Club Car, Yamaha and Melex.
|
|
|
Brush Crossover Lead for Series Wound GE Motors used on some Club Car, Taylor-Dunn and Raymond lift trucks.
|
|
|
Crankcase Bearing for 1963 to 1981 Harley Davidson +++ 1983 and newer Harley Davidson outer front wheel bearing on 4 wheel models +++ E-Z-GO motor bearing +++ Cushman rear axle bearing +++ 1981 to 1984 Club Car motor bearing +++ 2003 inner and outer Club Car DS front wheel bearings and 2004 and newer Precedent +++ Outer Wheel Bearing for 1982 to 2021 Yamaha models G1-G29 +++ Also 1990 to 1995 Hyundai outer front wheel bearing +++ Also Electric Motor Bearing for brush end on 1978 to 1991 models G1 and G2 and Taylor-Dunn +++ 1979 to 1982 Harley with Hitachi motor +++ Rear axle bearing on Taylor-Dunn, Davis, Jacobsen, and Nordskog +++ Front outer wheel bearing on 1986 to 1997 Taylor-Dunn model R-680 truck.
Retail: |
$22.95 |
On Sale: |
$14.87 |
You Save: |
36% |
|
|
|
Insulator Kit for Advanced Motor used on 2004 and newer Club Car Precedent +++ Also for E-Z-GO and Yamaha with Advanced Motor +++ Also Nordskog.
|
|