|
Primary Drive Clutch Spring Kit, (Yellow), for 1989 to 1994 Cushman GT-1 with 8 hp Kohler +++ 1991 to 1993 Cushman GT America +++ 1991 to 1994 Bellhop-2 and 1994 UTV-MAX +++ Also Taylor-Dunn and 2006 and newer Columbia Par Car
|
|
|
Motor Sprocket Woodruff Key for 1970 to 1972 Taylor-Dunn GT338 and GT348 +++ 1971 to 1979 models B, BN and M +++ 1972 to 1975 models GT-360 and GT 370 +++ 1975 to 1985 GT-371 and GT-372 +++ 1990s 48 volt Taylor Truck model B and electric model R-380.
|
|
|
Woodruff Key for Driven Clutch Fixed Sheave on 1979 to 2009 Yamaha models G1-G28 +++ Also pre-1998 Taylor-Dunn model R-680 truck with Yamaha engine.
Retail: |
$6.49 |
On Sale: |
$4.97 |
You Save: |
24% |
|
|
|
Movable Wiper Contact for Speed Control Board on Westinghouse models 425 and 427.
|
|
|
12 Volt Windshield Wiper Motor for Taylor-Dunn models BO-248, BO-254, BT248, BT-280 and others.
|
|
|
Whiz Lock Style Nut for 1965 to 1985 E-Z-GO +++ 1976 to 1978 Harley model DE-40 +++ 1971 to 1985 Melex +++ 1973 to 1976 Pargo model 544 with eight solenoids +++ Also Cushman +++ Many other applications.
|
|
|
White Steel Wheel +++ 8" diameter by 3-3/4" wide +++ Centered with no offset +++ 5 holes on 4-1/2" bolt circle +++ For E-Z-GO, Taylor-Dunn and others +++ Fits many makes of golf carts and industrial vehicles +++ For E-Z-GO industrial +++ Also Nordskog industrial vehicles +++ Also Westinghouse Marketeer industrial vehicles +++ Also Otis Westcoaster and S-71 golf carts +++ Also Pargo industrial, Columbia Par Car and other industrial vehicles.
|
|
|
White Steel Wheel +++ 8" diameter by 3-3/4" wide +++ Centered with no offset +++ 4 holes on 4" bolt circle +++ For E-Z-GO +++ Also Taylor-Dunn +++ Fits many makes of golf carts and industrial vehicles.
|
|
|
White Steel Wheel, 10" diameter by 8" wide +++ Has 3:5 offset +++ 4 holes on 4" bolt circle +++ Fits most golf carts.
|
|
|
Right passenger side Wheel Cylinder for Taylor-Dunn PullMaster tug +++ Also model B4-KB60 Kalamazoo Speed Truck and model B6-61 and others all with GT Drive Axle with Bendix brakes.
Retail: |
$53.34 |
On Sale: |
$29.83 |
You Save: |
45% |
|
|
|
Right Passenger Side Wheel Cylinder for Taylor-Dunn model ET-150 electric truck and other models with Bendix brakes.
Retail: |
$23.97 |
On Sale: |
$19.87 |
You Save: |
18% |
|
|
|
Left Drivers side Wheel Cylinder for Taylor-Dunn PullMaster tug +++ Also model B4-KB60 Kalamazoo Speed Truck and model B6-61 and others all with GT Drive Axle with Bendix brakes.
Retail: |
$53.34 |
On Sale: |
$29.83 |
You Save: |
45% |
|
|
|
Left Drivers Side Wheel Cylinder for Taylor-Dunn model ET-150 electric truck and other models with Bendix brakes.
Retail: |
$23.97 |
On Sale: |
$19.87 |
You Save: |
18% |
|
|
|
Wheel Cylinder for 2001 and newer E-Z-GO ST480 and ST 4x4 +++ Cushman Commander 4800 +++ Woods Boundary MAV 480 Vehicles.
Retail: |
$223.95 |
On Sale: |
$136.26 |
You Save: |
40% |
|
|
|
Wheel Cylinder for 2002 and newer Columbia Par Car.
Retail: |
$187.32 |
On Sale: |
$129.12 |
You Save: |
32% |
|
|
|
Brake Wheel Cylinder for 1992 and newer Cushman gas models GT-1 898369E, UTV Max 898669E and UTV Maxim 898689E and electric models GT-1 898370E, UTV Max 898670E and UTV Maxim 898690E +++ All with four hole brake drums +++ Also 2000 and newer Melex with hydraulic brakes with 19mm (3/4") bore..
Retail: |
$59.99 |
On Sale: |
$43.87 |
You Save: |
27% |
|
|
|
Brake Wheel Cylinder for 1989 and newer Cushman Turf Truckster and Haulster with 327 Cushman or Kawasaki liquid cooled engines and others... Will replace part OEM number 833900 which had a 15/16" bore but is obsolete.
Retail: |
$73.99 |
On Sale: |
$59.73 |
You Save: |
20% |
|
|
|
Wheel Cylinder Repair Kit for Cushman Truckster and Haulsters with Suzuki 660 or 970 engine.
|
|
|
Wheel Cylinder Repair Kit for Nordskog Marketeer models 262 & 264 and others with Lucas Girling brakes with 15mm bore, approximately 5/8".
|
|
|
CURRENTLY ON BACK ORDER +++ 6 ply 5.7-8" Tire mounted on White Steel Wheel +++ 8" diameter by 3-3/4" wide Centered Wheel +++ 5 holes on 4-1/2" bolt circle +++ For Taylor-Dunn and E-Z-GO industrial vehicles +++ Also Nordskog industrial vehicles +++ Also Westinghouse Marketeer industrial vehicles +++ Also Otis Westcoaster and S-71 golf carts +++ Also Pargo industrial and Columbia Par Car +++ Fits many makes of golf carts and industrial vehicles.
|
|
|
Weight Pin for Sliding Sheave on 1979 to 1986 Yamaha model G1.
|
|
|
Washer Plate for Primary Floating Sheave on 1982 to 1986 Yamaha model G1.
|
|
|
Washer Plate for tie rod end on 1979 to 1986 Yamaha G1 and G3 +++ Also used on secondary clutch on 1982 to 2002 models G2 through G21.
|
|
|
NO LONGER AVAILABLE, Use EL22-615 +++ Voltage Reducer for all carts with 36 or 48 volt systems... Converts these voltages down to 13.4 volts for running lights, radios and other 12 volt accessories... Has a high amp output of 30 amps peak.
|
|
|
Voltage Reducer with wiring harness for all carts with 36 or 48 volt systems... Converts these voltages down to 12 volts for running lights, radios and other 12 volt accessories. Has a high amp output of 30 amps peak.
|
|
|
NO LONGER AVAILABLE +++ Reducer Wiring Kit for voltage reducer numbers EL22-600 and EL22-610.
|
|
|
CURRENTLY ON BACK ORDER +++ Vintage Harley Davidson Cart Parking Only aluminum sign +++ Made in U.S.A
|
|
|
Vent Hose Barb for bottom of vent hose on fuel tank on 1992 and newer Club Car models DS and Precedent.
|
|
|
Valve Spring for All 1985 and newer Yamaha golf carts with 4 cycle engines, G2 through G29 YDRA "The Drive" +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
CURRENTLY ON BACK ORDER +++ Valve Lifter for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
Valve Guide for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
Retail: |
$41.12 |
On Sale: |
$27.63 |
You Save: |
33% |
|
|
|
CURRENTLY ON BO until end of August +++ Vacuum Control Valve for 1985 to 1995 Yamaha G2, G5, G8, G9 and G11 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.
|
|
|
USED Matched Ring and Pinion Gear Set for (GAS ONLY) 1973 to 1981 Harley Davidson and 1982 to 1994 Columbia Par Car with Dana Differential.
|
|
|
NONE AVAILABLE +++ Used Right Passenger Side Rear Axle for 1977 to 1981 E-Z-GO Gas Marathon with keyway +++ 25-1/2" +++ Only One Available!
|
|
|
NO LONGER AVAILABLE +++ Used Intermediate Gear Assembly for 1984 to 1986 Club Car electric model DS with Fugi differential from serial number A8405-50907 to A8611-90299
|
|
|
NO LONGER AVAILABLE+++ Use new one AX44-110 +++ Used Ten Spline Transaxle Input Shaft for 1984 to 1986 Club Car electric model DS with Fugi differential from serial number A8405-50907 to A8611-90299
|
|
|
NOTE: None Currently Available +++ Good Used Rubber Air Cleaner Dust Unloader located at the the bottom of the air cleaner housing on 1968 to 1981 Harley Davidson models D, DC, and D4 and 1982 to 1995 Columbia Par Car models +++ Also 1976 to 1994 E-Z-GO pre-Medalist with 2 cycle engine +++ NOTE: All used parts subject to availability.
|
|
|
NONE AVAILABLE +++ Use FU11-030 +++ Used Air Cleaner Canister for 1968 to 1981 Harley Davidson models D, DC and D4 +++ Also 1982 to 1983 & 1989 to 1995 Columbia Par Car with 2 cycle +++ Also 1976 to 1994 E-Z-GO pre-Medalist with 2 cycle engine.
|
|
NO LONGER AVAILABLE +++ Good Used 16 External Spine, 36 Volt Motor for 1970 to 1983 Club Car +++ 1969 and newer Pargo +++ 1960s E-Z-GO golf cart with 16 Spline Motor and 1986 EZ-GO Industrial models +++ Also replaces Hitachi motor MT320-07 on early Yamaha GI +++ Legend models EV3-01/EV4-01 and RV3-01/RV4-01 +++ All carts with Terrill differential.
|
|
|
Long Upper Brake Shoe Return Spring for 1990 and newer Cushman +++ Eagle +++ Hawk +++Hawk II +++ GT-1 +++ UTV MAX +++ UTV-Maxim +++ 1990 to 1994 electric Tug +++ All with the small brake shoes, our number BK33-350 +++ Also 2008 and newer Columbia Par Car Mega electric vehicles.
|
|
|
Upper Brake Return Spring for Taylor-Dunn model R-249 Tug and Taylor Truck with GT Drive System with Dana 60 axle with 12" by 2.5" brake shoes.
|
|
|
Upper Ball Joint for Cushman Truckster and Haulster models with the 327 Suzuki K6 gas engine or the Kubota diesel.
|
|
|
Upgraded Spindle Pin Bolt Kit for 1994 to 2000 E-Z-GO gas and electric models TXT, Medalist, 4 and 6 Passenger Shuttle, ST Express and Workhorse 800, 1000 and 1200 Models +++ Grade 8 hardened bolt
Retail: |
$19.95 |
On Sale: |
$14.67 |
You Save: |
27% |
|
|
|
Rear Spring U-Bolt for 1996 and newer E-Z-GO gas and electric Medalist and TXT, 4&6-Passenger Shuttle, ST Express, ST 350, ST Sport, and Workhorse 800 and 1200 Models.
|
|
|
Rear Spring U-Bolt for 1994-1/2 E-Z-GO gas and electric Medalist and TXT model.
|
|
|
Rear Spring U-Bolt for 2008 E-Z-GO gas and electric RXV model +++ Has M10-1.5mm threads
|
|
|
4 Ply Soft Turf Tire with rounded shoulders +++ 18x9.50-8 +++ For 8" wheel.
|
|
|
Sahara Classic 4 Ply Turf Tire +++ 18x9.50-8 +++ For 8" wheel.
|
|
|
Tune Up Kit for 1994-1/2 to 2006 E-Z-GO with 4 cycle engine.
|
|
|
Transmission Input Shaft Oil Seal for 1978 to 1989 Yamaha G1 and 1986 G3 gas +++ Also 1985 to 1996 models G2, G5, G8, G9, G11 and G14.
|
|