|
NOTE: None Available +++ Reconditioned Cylinder and Piston Assembly for 1963 to 1966 Harley Davidson.
Part Number: EN11-057
|
|
|
50 amp Circuit Breaker for Lester battery charger on Harley Davidson and Club Car +++ E-Z-GO before Total Charge +++ Works on other chargers and applications.
Part Number: SW11-010
|
|
|
Disc Brake Caliper Repair Kit for 1983 to 1988 Nordskog model 280/282 series with Ausco disc brakes. +++ 1984 and newer Taylor-Dunn models B-238, B-246, B-248, B-254 and 1989 and newer B-660, B-661 and B-661E from serial number 127659 +++ 1991 to 1999 Taylor-Dunn model R-380 +++ and 1997 and newer BT-280 +++ 1996 to 2008 gasoline powered Columbia Par Car models Eagle, Foursome, Utilitruck, Shuttle, and Tram.
Part Number: BK55-040
|
|
|
Alltrax programmable replacement Controller for the 1206 Curtis Motor Speed Controller for 1994-1/2 and newer E-Z-GO Medalist and TXT models with ITS (Inductive Throttle System), Non DCS or PDS for series wound motors, Output: 300 amps at 12 to 48 volts.
Part Number: SP11-347
|
|
|
ONLY ONE AVAILABLE +++ Brand New (N.O.S.) Driving Flange for 1972 to 1981 Harley Davidson +++ Has wide groove for 7/16" wide belt.
Part Number: CL11-270
|
|
|
Connecting Rod for 1985 to 1996 Yamaha G2, G8, G9, G11 and G14 with 4 cycle engine +++ 1986 to 1997 Taylor-Dunn model R-680 engine.
Part Number: EN99-620
|
|
|
Good Used Front Driving Flange for 1972 to 1981 Harley Davidson +++ Has wide groove for 7/16" wide belt.
Part Number: CL11-270U
|
|
|
Solid Copper Power Bar for Speed Control on 1965 to 1973, 4 and 5 speed Taylor-Dunn Industrial Vehicle Models SC, AN, B, BN and model R-338/348 and 2339... Also 1959 to 1963 Tridents and Tee Bird Golf Carts models GT-360, GT-361, GT-370, and 1961 to mid 1973 GT-371 and other Taylor-Dunn... Also mid 1970s Eagle golf cart made in Long Beach California by Lad Industries +++ Karrior with mechanical speed control.
Part Number: SP88-560
|
|
|
NONE AVAILABLE +++ You can use SP11-347 +++ E-Z-GO Factory O.E.M. Curtis 1206 Motor Speed Controller for 1994-1/2 and newer E-Z-GO Medalist and TXT models with ITS (Inductive Throttle System) +++ Also 1998 to 2002 Workhorse 800 and 2004 to 2012 MPT 800 +++ Output: 350 amps at 36 volts.
Part Number: SP11-346
|
|
|
Clutch Disc for 1989 and newer Cushman Truckster and Haulsters with water cooled three cylinder 27hp 327 Diahatsu or Kawasaki engines.
Part Number: CL33-080
|
|
|
Cable Bracket Spacer on generator belt end of 1967 to 1981 Harley Davidson model D, DC and D4.
Part Number: EL11-017
|
|
|
Compression Spring for Throttle Cable to Carburetor connection on 1976 to 1988 E-Z-GO with 2 cycle engine.
Part Number: FU22-510
|
|
|
Front Spring Type Shock Absorber for 1985 and newer Taylor-Dunn model R-380.
Part Number: ST88-250
|
|
|
Clutch Disc for Cushman Truckster and Haulsters water cooled four cylinder with 970 Suzuki engine.
Part Number: CL33-083
|
|
|
Connecting Rod Bolt for 1985 to 1996 Yamaha G2, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine. NLA
Part Number: EN99-630
|
|
|
12 to 48 Volt, 400 Amp Programmable Replacement Electronic Motor Speed Controller for 1995 and newer E-Z-GO industrial models 950 Series Shuttle, XI-875/881 Burden Carrier and Workhorse/MPT (Multi-Purpose Truck)1000 with series wound motors.
Part Number: SP11-341
|
|
|
Programmable 300 Amp Controller for 2000 and newer Club Car with 48 Volt IQ system.
Part Number: SP44-420
|
|
|
Colored Replacement Seat for model 412 and earlier Melex with split back seats +++ Also 1971 to 1993 E-Z-GO pre-Medalist/TXT ++ All with rounded back corners.
Part Number: BD66-150
|
|
|
Ten Spline Clutch Disc for 1989 to 1990 E-Z-GO GTX-1500 and GXI-1500 heavy duty trucks with Onan engine... Also Jacobsen Industrial Vehicles with Onan gas engine.
Part Number: CL22-260
|
|
|
Rear Crankshaft Seal for 1990 to 1994 Cushman Minute Miser model 898319 with Kohler 8hp K181 engine +++ Also fits Kohler K161 engine on other applications.
Part Number: BE33-090
|
|
|
Curtis 36 to 48 Volt, 500 Amp Motor Speed Controller upgrade for 1994-1/2 and newer E-Z-GO with series wound motor and ITS (Inductive throttle system) throttle pot.
Part Number: SP22-600
Retail: |
$1,030.95 |
On Sale: |
$698.03 |
You Save: |
33% |
|
|
|
Colored Replacement Seat for model 512 model Melex with split back seats ++ With square back corners
Part Number: BD66-151
|
|
|
No Longer Available +++ Use SP11-370 or SP11-372 +++ E-Z-GO Factory O.E.M. Curtis 1206 Motor Speed Controller for 1995 to 1999 E-Z-GO with DCS (Drive Control System).
Part Number: SP11-350
|
|
|
Carburetor for 2008 and newer E-Z-GO model RXV with Kawasaki 400cc 4 cycle 13hp engine +++ Fits 4 and 6 passenger Shuttle Personnel Carriers +++ Also fits the 1200 Refresher Beverage Carts and the 1200 MPT and Multi-Purpose Trucks, as well as many Cushman industrial carts.
Part Number: FU22-330
Retail: |
$156.74 |
On Sale: |
$78.37 |
You Save: |
50% |
|
|
NONE AVAILABLE +++ Good Quality Used Stainless Spring Steel Motor Drive Shaft Flex Plate for Cushman... IMPORTANT NOTE: Subject to availability.
Part Number: MT33-023U
|
|
|
Replacement Carburetor for E-Z-GO ST480 Workhorse with 16 HP Briggs and Stratton engine.
Part Number: FU22-335
Retail: |
$127.32 |
On Sale: |
$127.32 |
|
|
|
Fan Side Crankcase Seal for 1976 to mid 1980 E-Z-GO with 244 cc Robin 2 cycle 2PG engine by Fugi Heavy Industries with internal starter generator.
Part Number: BE22-002
|
|
|
Crankcase Gasket for 1992 and newer Club Car models DS and Precedent with FE290 four cycle engine.
Part Number: EN44-530
|
|
|
Replacement Motor Speed Controller for 1995 to 1999 E-Z-GO with DCS (Drive Control System), Output: 300 amps at 24 to 48 volts.
Part Number: SP11-370
|
|
|
Primary Drive Clutch for for 2006 and newer Columbia Par Car with 13 hp Briggs and Sratton 4 cycle engine.
Part Number: CL11-572
|
|
|
NOW AVAILABLE +++ Thick Fiber Carb Insulator Gasket for 1963 to 1981 Harley Davidson models D, DF, DC, and D4 +++ Goes between carb gasket and manifold +++ Has two mounting holes and two air holes +++ Uses 3 per cart
Part Number: FU11-640
|
|
|
ONLY ONE AVAILABLE +++ Crankshaft for 1996 to 2009 Yamaha G16, G20, G21, G22, G23, G27 and G28 and 2007 and newer model YDR, "The Drive" +++ All with 4 cycle engine.
Part Number: EN99-740
Retail: |
$525.95 |
On Sale: |
$429.43 |
You Save: |
19% |
|
|
|
Replacement Motor Speed Controller for 1995 to 1999 E-Z-GO with DCS (Drive Control System) with 9 pin connector, Output: 400 amps at 24 to 48 volts.
Part Number: SP11-372
|
|
|
Outer Control Arm Thrust Collar for 2003 to 2009 Yamaha G22, G27 and G28 +++ Also 2007 and newer model YDR "The Drive".
Part Number: ST99-174
|
|
|
Control Board for PowerWise Battery Charger used on mid 1994 and newer models Medalist, TXT, and Workhorse.
Part Number: BT22-099
|
|
|
All New Brush Holder with Brushes and Springs for the Polish Celma motor used on 1984 and older Melex models 102, 202, 112, 212, 152, 252, and early 412 with band brake on motor.
Part Number: BR66-020
|
|
|
12-volt 15-amp Circuit Breaker for 1968 to 1981 Harley Davidson gas and 1982 to 2000 gas and electric Columbia Par Car.
Part Number: SW11-000
|
|
|
Connecting Rod for 1996 to 2009 Yamaha G16, G20, G21, G22, G23, G27 and G28 +++ Also 2007 and newer model YDR, "The Drive" +++ All with 4 cycle engine.
Part Number: EN99-750
|
|
|
12-volt 15-amp Circuit Breaker for 2001 and newer gas and electric Columbia Par Car
Part Number: SW11-001
Retail: |
$14.32 |
On Sale: |
$9.72 |
You Save: |
33% |
|
|
|
Cooling Shroud for 1967 to 1981 Harley Davidson model D and 1969 to 1981 model DC, D4.
Part Number: EN11-610
|
|
|
Fan Side Crankcase Seal for 1991 and newer E-Z-GO with 295cc and 350cc 4 cycle engines.
Part Number: BE22-040
|
|
|
Carburetor Insulating Bushing for Tillotson Carburetor on 1963 to 1981 Harley Davidson models D, DF, DC and D4.
Part Number: FU11-301
|
|
|
Factory O.E.M. Curtis 1206 Motor Speed Controller for 2000 and newer E-Z-GO & Western with PDS (Positive Drive System), Output: 350 amps at 36 volts +++ Also for 48 volts.
Part Number: SP11-380
|
|
|
NONE CURRENTLY AVAILABLE +++ On Back Order +++ Engine Cylinder for 1978 to 1989 Yamaha GI & G3 +++ Except 1982 model J17 +++ Fits models J10, J24, and J31 with 2 cycle engine.
Part Number: EN99-020
|
|
|
Thick Carb Insulator Block for 1982 to 1995 Columbia Par Car with Walbro Carburetor, goes between carburetor and manifold.
Part Number: FU11-267
|
|
|
Caution Decal for 1982 Columbia Par Car model D3 mounted on the dash and mounted in center of card holder on model DX4.
Part Number: BD11-745
|
|
|
3 Prong Charge Receptacle for DC Plug on 1969 to 1972 Harley Davidson model DE and DEC +++ Also Older E-Z-GO, Cushman, Taylor-Dunn, Yamaha and others +++ Note, will accept either three or two pronged "Crows Foot" plugs.
Part Number: BT11-011
|
|
|
NOW AVAILABLE +++ Cowl Cap for 1989 to 1994 E-Z-GO pre-Medalist Marathon model.
Part Number: BD22-700
|
|
|
New Old Stock Cooling Shroud for 1982 to 1995 Columbia Par Car +++ Very Limited Amount Left!
Part Number: EN11-613
|
|
|
Starter/Generator Commutator End Cover with Brush Holder and Brushes for for 1977 to 1981 Harley Davidson and 1982 to 2008 Columbia Par Car both 2 cycle and 4 cycle models +++ 1984 to 1996-1/2 Club Car model DS +++ 1978 to 1993 E-Z-GO with 2 cycle engine +++ Yamaha from 1979 to 1989 models G1, G2, G8, G9, G11, G14 and G16 +++ 1986 to 1997 Taylor-Dunn model R-680 truck +++ 1990 to 1995 Hyundai +++ Also Melex.
Part Number: EL11-030
Retail: |
$87.75 |
On Sale: |
$69.76 |
You Save: |
21% |
|
|