|
No Longer Available +++ Point Set for 1963 to 1966 model D, DF, and DC and 1967 to 1968 model DC Harley Davidson.
|
|
|
CURRENTLY ON BACK ORDER +++ Standard Piston & Ring Assembly for 1984 to 1991 Club Car with 341cc KF-82 side valve flat head engine +++ Includes piston, rings, wrist pin, and keepers.
|
|
|
Standard Piston Assembly with Rings, Pin and Keepers for 1978 to 1989 Yamaha G1 with two cycle J10, J17, J24 and J31 engine +++ Also for 1986 G3 with J42 two cycle engine.
|
|
|
.010" Oversize Piston and Ring Assembly for 1971 to 1975 E-Z-GO with 175cc 1PG 2 cycle engine. Includes wrist pin and keepers +++ Piston measures 62mm diameter (2.445")
|
|
|
Hairpin Style Clip for Accelerator Cable Clevis Pin for 1979 to 2009 Yamaha gas models G1, G2, G3, G5, G8, G9, G11, G14, G16, G19, G20, G21, G22, G23, G27, G28 +++ Also 2007 and newer Yamaha model YDR, "The Drive" +++ Also 1986 to 1997 Taylor-Dunn model R-680 truck +++ Many other applications.
|
|
|
Standard Piston and Ring Assembly for 1976 to 1988 E-Z-GO with model EC25-DS and EC25-2PG, 244cc, 2 cycle engines.
Retail: |
$137.95 |
On Sale: |
$89.43 |
You Save: |
36% |
|
|
|
Point Set for 1967 to 1970 Harley Davidson model D and 1969 to 1970 model DC.
Retail: |
$24.86 |
On Sale: |
$13.37 |
You Save: |
47% |
|
|
|
CURRENTLY ON BACK ORDER +++.25mm (.010") Oversize Piston & Ring Assembly for 1984 to 1991 Club Car with 341cc KF-82 side valve flat head engine +++ Includes piston, rings, wrist pin, and keepers.
|
|
|
Comet Style bolt on replacement Primary Drive Clutch for ALL 1985 to 2009 Yamaha four cycle gas models G2-G28 +++ Also 1990 and newer Taylor Dunn model R6-80 Roadmaster truck.
|
|
|
Clutch Pressure Plate for 1960 and newer Cushman model 735, Truckster, or Haulster with 18 or 22 Horsepower OMC engine. +++ 1989 to 1990 E-Z-GO GTX-1500 and GXI-1500 with Onan engine +++ Also Jacobsen Industrial Vehicles with Onan gas engine.
|
|
|
Standard Piston Ring Set for 1978 to 1989 Yamaha G1 with two cycle engine... Also 1986 G3 with J42 engine.
|
|
|
Potentiometer for 1989 to 1994 E-Z-GO Pre-Medalist with micro switch.
|
|
|
Piston and Ring Assembly (.25 mm O/S) for 1976 to 1988 E-Z-GO with model EC25-DS and EC25-2PG, 244cc, 2 cycle engines.
|
|
|
NO LONGER AVAILABLE +++ .50mm (.020") Oversize Piston & Ring Assembly for 1984 to 1991 Club Car with 341cc KF-82 side valve flat head engine +++ Includes piston, rings, wrist pin, and keepers.
|
|
|
.25mm (.010") Over Piston Assembly with Rings, Pin and Keepers for 1978 to 1989 Yamaha G1 with two cycle J10, J17, J24 and J31 engine +++ Also for 1986 G3 with J42 two cycle engine.
|
|
|
Now Available +++ Ignition Pulsar Coil for 1979 to 1989 Yamaha model G1 and G3.
|
|
|
Pinion Bearing for Nordskog model 323 Tote-N-Tow +++ Model 535 Errand Master +++ Nordskog models 280/282 B,C and D models +++ Cushman differential pinion bearing.
|
|
|
NO LONGER AVAILABLE +++ Primary Drive Clutch Fixed Sheave for 1979 to 1989 Yamaha G1.
|
|
|
Replacement Primary Drive Clutch for 2007 to 2017 Yamaha four cycle gas model G29 "The Drive"
|
|
|
Piston and Ring Assembly (.50 mm O/S) for 1976 to 1988 E-Z-GO with model EC25-DS and EC25-2PG, 244cc, 2 cycle engines.
|
|
|
Point Set for 1971 to 1981 Harley Davidson models D, DC and D4 +++ Also 1982 to 1983 Columbia Par Car models D3 and DX4 and 1984 to 1985 models G3, G4 and U4.
Retail: |
$13.59 |
On Sale: |
$8.61 |
You Save: |
37% |
|
|
|
NOW AVAILBLE +++ Standard Piston Ring Set for 1984 to 1991 Club Car with 341cc KF-82 side valve flat head engine. +++ NOTE: For standard 80mm bore.
|
|
|
.25mm (.010") Oversize Piston Ring Set for 1978 to 1989 Yamaha G1 with two cycle engine & 1986 G3 with J42 two cycle engine.
|
|
|
NO LONGER AVAILABLE +++ Primary Drive Fixed Sheave for Comet Style Clutch on 1985 to 1996 Yamaha four cycle gas models G2, G8, G9, G11, and G14 +++ Also pre-1998 Taylor Dunn model R-680.
|
|
|
Pinion Bearing Race for Nordskog model 323 Tote-N-Tow +++ Model 535 Errand Master +++ Nordskog models 280/282 B,C and D models +++ Cushman differential pinion bearing.
|
|
|
Ignition Source Coil for 1979 to 1989 Yamaha model G1 and G3.
|
|
|
NOW AVAILABLE +++ .25mm (.010") over Piston Ring Set for 1984 to 1991 Club Car 341cc KF-82 side valve flat head engine.
|
|
|
.50mm (.020") Over Piston Assembly with Rings, Pin and Keepers for 1978 to 1989 Yamaha G1 with two cycle J10, J17, J24 and J31 engine +++ Also for 1986 G3 with J42 two cycle engine. .
|
|
|
Standard Bore Two Port Piston and Ring Assembly for 1989 to 1993 E-Z-GO with EC25-3PG, 244cc, 2 cycle engine.
|
|
|
Pinion Seal for Nordskog model 323 Tote-N-Tow and model 535 Errand Master +++ Also 280/282 B,C and D models +++ Also Columbia Par Car Burden Carriers BC4 and BC5.
|
|
|
Standard Bore Piston and Ring Assembly for 1994 to 1996 Melex model 512G with black 16 cubic inch Vanguard engine.
|
|
|
Differential Pinion Bearing for 1981 to 1985 Taylor-Dunn models GT-370 and GT-371 and R-380 with F3 drive from serial number 130187 +++ Also B-248 Pinion Bearing and newer and many others.
|
|
|
Factory Parts Manual for 1965 to 1967 E-Z-GO Electric Models X440 and X444 Marathon.
|
|
|
.50mm (.020") over Piston Ring Set for 1984 to 1991 Club Car with 341cc KF-82 side valve flat head engine.
|
|
|
.50mm (.020") Oversize Piston Ring Set for 1978 to 1989 Yamaha G1 with two cycle J10, J24, and J31 engine and 1986 G3 with J42 two cycle engine.
|
|
|
.25mm Oversize Two Port Piston and Ring Assembly for 1989 to 1993 E-Z-GO with EC25-3PG, 244cc, 2 cycle engine..
|
|
|
No Longer Available +++ Factory New Points Mounting Plate with pivot pin for two piece points for 1967 to 1970 Harley Davidson model D and 1969 to 1970 model DC.
|
|
|
Pinion Seal for late 1977 Harley Davidson model D and D4 with Peerless Differential.
|
|
|
NONE CURRENTLY AVAILABLE +++ CALL +++ Ignition Pulsar Coil for 1990 to 1996 Yamaha models G8, G11 and G14.
|
|
|
.030" Overbore Piston and Ring Assembly for 1994 to 1996 Melex model 512G with black 16 cubic inch Vanguard engine.
|
|
|
Factory Maintenance, Operation and Parts Manual for 1965 to 1967 E-Z-GO Electric Model X440.
|
|
|
NONE AVAILABLE ++ You can upgrade to the newer style IG11-010 +++ Used Mounting Plate with pivot pin for 1967 to 1970 Harley Davidson model D and 1969 to 1970 model DC.
|
|
|
NO LONGER AVAILABLE +++ .75mm (.030") Over Piston Assembly with Rings, Pin and Keepers for 1978 to 1989 Yamaha G1 with two cycle J10, J17, J24 and J31 engine... Also for 1986 G3 with J42 two cycle engine.
|
|
|
Pinion Oil Seal for 1970 to 1972 Taylor-Dunn models GT338 and GT348 +++ 1971 to 1979 models B, BN and M +++ 1972 to 1975 Tee Bird models GT360 and GT361 +++ 1975 to 1985 GT370 and GT371 +++ 1990s 48 volt Taylor Truck model B and others.
Retail: |
$24.37 |
On Sale: |
$19.56 |
You Save: |
20% |
|
|
|
.50mm Oversize Two Port Piston and Ring Assembly for 1989 to 1993 E-Z-GO with EC-25-3PG, 244cc, 2 cycle engine.
|
|
|
Pinion Bearing for late 1977 Harley Davidson model D and D4 with Peerless Differential.
|
|
|
Standard Bore Piston Ring Set for 1994 to 1996 Melex model 512G with black 16 cubic inch Vanguard engine.
|
|
|
Factory Parts Manual for 1968 to 1970 E-Z-GO Electric Models X440 and X444 Marathon.
|
|
|
Reverse Pinion Side Double Row Ball Bearing used in Reversing Transmission on 1963 to 1966 Harley Davidson models D, DF and DC and 1967 to 1968 model DC.
|
|
|
Reverse Pinion Side Needle Bearing used in Reversing Transmission on 1963 to 1966 Harley Davidson models D, DF and DC and 1967 to 1968 model DC.
|
|