Our Part Number: FR44-000
OEM Part Numbers - CC 1011997, 1017530-03, 101753003 Item Description - Forward and Reverse Switch Assembly for 1983-1/2 to 2001 Club Car with 36 volt system with resistors +++ Will retrofit pre 1983-1/2 with modifications, Please read below. NOTE: Includes micro switch, does not include handle. NOTE: Instructions for installing in earlier Club Car: You will need to drill new mounting holes in the mounting bracket. On 1975 to 1980 Caroche model remove the two motor wires, (A1 and A2) that are connected at the bottom of the switch and jumpered to the rotor. Hook them back up to the rotor only. Now take (S) wire that was connected to the upper right bus bar on your old switch and move it to one of the two lower parallel bus bars. These two bars will need to be jumpered together. Now take the battery positive cable and hook it to the single bus bar on the right side. NOTE: On 1981 to 1985 model DS install the two wires that went to the rotor back on the rotor of the new switch. Move battery positive to the single right hand bus bar. Connect the S1 terminal from the motor to one of the bottom parallel bus bars on the bottom of the new switch. These two bus bars will need to be jumpered together. The fourth wire coming from the middle of the battery stack is not used and should be removed. This wire was for an 18 volt reverse so you would not go as fast in reverse. NOTE: Click Here to see a larger version of the 1975 to 1979 retrofit wiring diagram. NOTE: Click Here to see a larger version of the 1981 to 1983-1/2 retrofit wiring diagram.
|